본 연구에서는 배가스 내 존재하는 오염물질인 NO의 처리효율을 증대시키기 위하여 NO 산화 공정을 연구하였으며, 강력한 산화력의 건식산화제를 제조하는 방법으로 H2O2 촉매분해가 도입되었다. H2O2 분해공정 상에서 적용 가능한 K-Mn/Fe2O3 불균일계 촉매가 제조되었으며, 이들이 가지는 물리화학 적 특성이 H2O2 분해반응에 미치는 영향이 조사되었다. 제조된 건식산화제는 NO가 포함된 모사 배가스를 처리하기 위한 NO 산화공정에 적용되었으며, 다양한 모사 배가스의 유량(5, 10, 20 L/min)에서 약 100% 가까운 NO 전환율을 확인 하였다.

Vacuum kinetic spray(VKS) is a relatively advanced process for fabricating thin/thick and dense ceramic coatings via submicron-sized particle impact at room temperature. However, unfortunately, the particle velocity, which is an important value for investigating the deposition mechanism, has not been clarified yet. Thus, in this research, VKS average particle velocities were derived by numerical analysis method(CFD: computational fluid dynamics) connected with an experimental approach(SCM: slit cell method). When the process gas or powder particles are accelerated by a compressive force generated by gas pressure in kinetic spraying, a tensile force generated by the vacuum in the VKS system accelerates the process gas. As a result, the gas is able to reach supersonic speed even though only 0.6MPa gas pressure is used in VKS. In addition, small size powders can be accelerated up to supersonic velocity by means of the drag-force of the low pressure process gas flow. Furthermore, in this process, the increase of gas flow makes the drag-force stronger and gas distribution more homogenized in the pipe, by which the total particle average velocity becomes higher and the difference between max. and min. particle velocity decreases. Consequently, the control of particle size and gas flow rate are important factors in making the velocity of particles high enough for successful deposition in the VKS system.