For practical applications of graphene sheets in a variety of fields, mass production of high-quality graphene sheets is necessary. Herein, we reported a cost-effective, green, and simple approach to synthesizing mass production exfoliated graphene (EG) flakes employing electrochemical exfoliation of pencil graphite in neutral aqueous electrolytes. Pencil graphite cores of different grades were applied as anode and cathode electrodes and exposed to the electrolyte solution at a different voltage. Several parameters were examined and optimized, including pencil grade (2,4,6,8 B), applied voltage (10, 15, 20, 30 V), different inorganic electrolytes ((NH4)2SO4, Na2SO4, NaNO3, NaCl, and CH3COONa), and the concentration of electrolytes. The optimal condition was chosen by considering the mass of produced graphene and the conductivity of the graphene solution. The optimal conditions were as follow: pencil grade: 6B; applied voltage: 10 V; electrolyte type: Na2SO4; electrolyte concentration: 0.1 M. Under these conditions, the production yield was > 95% within 3 h and 9 min. The EG was characterized by utilizing FT-IR, XRD, Raman spectroscopy, FE-SEM, Cyclic Voltammetry, and Electrochemical Impedance Spectroscopy (EIS). Characterization indicates that the synthesized EG had an XRD peak at 2θ = 26.6° and an ID/ IG ratio of 0.36. Furthermore, the EG showed good conductivity when tested by cyclic voltammetry and EIS whereas the R2 values were 985.8 and 76.3 Ω for bare GCE and EG/GCE, respectively. In addition, EG effectively removed cadmium (Cd(II)) with an adsorption level of 8.72 mg/g. The results from this study suggest that EG can be scaled up and commercialized in an environmentally friendly and low-cost manner, especially in low-income countries, and using it to rectify metal ions.

This study evaluated how acid treatment affects the ability of customized beads of activated carbon (BAC) to remove formaldehyde from air. Two different acids (hydrofluoric acid and sulfuric acid) were used to modify the surface of BAC prepared from a polymer material. The acid-modified BACs were further subjected to heat treatment. Physical and chemical characteristics of modified and unmodified BACs were investigated using nitrogen adsorption, Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray fluorescence, and X-ray photoelectron spectroscopy. Formaldehyde removal was evaluated under both dry and moist conditions. From the results, acid treatment clearly improved the adsorption performance, especially under the moist condition. Qualitative and quantitative surface analyses were conducted, mainly to examine the amount of O-bonds after acid treatment and the formation of S–O or Cl–O on BAC.

Understanding molting process in subterranean termites is a critical step to implement successful control program as chitin synthesis inhibitor baits interfere molting process of termites. In the present study, we report detailed molting process in Reticulitermes speratus kyushuensis Morimoto, 1968 that foraging workers start fasting period 5 days after they were collected and finished their entire molting process for the next 5 to 6 days. Ecdysis took less than an hour, specifically 9.2 ± 4.9 minutes from jack-knife posture to separation of the antenna and 36.6 ± 8.5 minutes from separation of the antenna to regain mobility. We believed relatively short time window of molting process in R. speratus kyushuensis may affect lengthy colony elimination time.

Recently, the necessity of designing and applying tool materials that perform machining of difficult-to-cut materials in a cryogenic treatment where demand is increasing. The objective of this study is to evaluate the performance of cryogenically treated WC-5 wt% NbC hard materials fabricated by a pulsed current activated sintering process. The densely consolidated specimens are cryogenically exposed to liquid nitrogen for 6, 12, and 24 h. All cryogenically treated samples exhibit compressive stress in the sintered body compared with the untreated sample. Furthermore, a change in the lattice constant leads to compressive stress in the specimens, which improves their mechanical performance. The cryogenically treated samples exhibit significant improvement in mechanical properties, with a 10.5 % increase in Vickers hardness and a 60 % decrease in the rupture strength compared with the untreated samples. However, deep cryogenic treatment of over 24 h deteriorates the mechanical properties indicating that excessive treatment causes tensile stress in the specimens. Therefore, the cryogenic treatment time should be controlled precisely to obtain mechanically enhanced hard materials.

Protoplasts were isolated from the primary leaves of lettuce (Lactuca sativa L.) seedlings 10 days after in vitro germination. The leaves were stripped and incubated in an enzyme mixture consisting of 1.2% Cellulase R-10 and 0.3% Macerozyme R-10 in cell and protoplast washing solution (CPW) overnight. The average protoplast yield was 8.25 x 106 protoplasts per g of fresh leaf tissue. When protoplasts were cultured at a density of 3.0 × 105 protoplasts/mL in agarose solid KM8P/KM8 medium, first and second divisions were observed in the protoplasts within a week. Protoplast-derived microcolonies formed after 4 weeks of culture, and visible colonies were present after 3 months of culture. Protoplast-derived microcalli were transferred to Murashige and Skoog medium supplemented with 2.0 mg/L kinetin and 0.1 mg/L NAA and incubated in the light for 3 weeks. They grew into callus, which then regenerated into plants after 7 weeks of culture. The regenerated plants grew as apparently normal flowering fertile plants.

The pitch-based activated carbon fibers (ACFs) were prepared from ethylene tar-derived pitches containing nickelocene (CNi) or nickel nitrate (NiN). The effects of different anions and contents of metal salts on the microstructure and surface chemical properties of fibers were investigated. The results revealed that Ni2+ from CNi mainly remained its pristine molecule in the organometal salt-derived pitch (OP-xCNi), while Ni2+ from NiN occurred complexation reaction with polycyclic aromatic hydrocarbons (PAHs) in the inorganic metal salt-derived pitch (IP-xNiN) due to the weaker binding ability between anions and Ni2+ of CNi than CNi. The XRD and SEM results confirmed that IP-3NiN-ACF contained Ni, NiO, Ni2O3 nanoparticles with different size distributions, while OP-3CNi-ACF only contained more uniformly distributed Ni nanoparticles with small size. Furthermore, OP-3.0CNi-ACF presented higher specific surface area of 1862 m2/ g and a pore volume of 1.69 cm3/ g than those of IP-3.0NiN-ACF due to the formation of pore structure during the in-situ catalytic activation of different metal nanoparticles. Therefore, this work further pointed out that the desired pore structure and surface chemistry of pitch-based ACFs could be obtained through regulating and controlling the interaction of anion species, metal cations and PAHs during the synthesis of pitch precursors.

Here, we have demonstrated the successful exfoliation of graphite into a layered material with scotch tape-like exfoliation. Sulfur acts as an exfoliating agent and exfoliates the loosely bounded graphite stacks. The shear force by ball milling provides the force required to overcome the van der Waals force between the layers. The MnO2 nanorods were synthesized using a KMnO4 precursor in a hydrothermal arrangement, and due to their intrinsic chemisorption capability, they were doped for polysulfide trapping. With an initial capacity of 1150 mAh/g achieved by the MnO2 nanorod-doped exfoliate-graphite/sulfur composite material, the material has displayed its application in lithium–sulfur batteries, but its use is not limited; it can be a low-cost eco-friendly solution to various energy storage systems with extensive structural qualities.

Alzheimer's disease (AD) is one of the most common forms of dementia, affecting more than 50 million people globally. The onset of AD is linked to age, smoking, obesity, hypercholesterolemia, physical inactivity, depression, gender, and genetics of an individual. The accumulation of Aβ peptides and neurofibrillary tangles (NFTs) in the brain is one of the critical factors that lead to AD, which is known to disrupt neuronal signaling and causing neurodegeneration. As per the current understanding, inhibiting the accumulation of Aβ peptides and NFTs is crucial in the management/treatment of AD. Latest research studies show that nanoparticles have the potency of improving drug transport across the blood–brain barrier easily. Specifically, graphene quantum dots (GQDs), a type of semiconducting nanoparticles, have been established as effective inhibitors for blocking the aggregation of Aβ peptides. The small size of GQDs allows them to pass through the blood– brain barrier with ease. Moreover, GQDs have fluorescence properties, which can be used to detect the concentration of Aβ in vivo. In recent years, compared to other carbon materials, the low cytotoxicity and high biocompatibility of GQDs, give them an advantage in the suitability and clinical research for AD. In this manuscript, we have discussed the role of different types of nanoparticles in the transportation of encapsulated or co-assembled compound drugs for the treatment of AD and importantly, the role of GQDs in the diagnosis and management/treatment of AD.

국제해사기구(IMO, International Maritime Organization)를 중심으로 자율운항선박 도입을 대비한 해사안전 및 보안관련 국제 협약 을 제정하고 있다. 국내에서도 선급 및 산업체를 중심으로 자율운항시스템 기술개발에 착수하고 있으며 연안선박에서 발생하는 사고를 줄이기 위해 연안선박을 대상으로 하는 자율운항선박 기술적용 방안 연구가 진행되고 있다. 국내외적으로 자율운항선박에 대한 관심이 크게 증가하고 있으며 실제 개발된 기술의 검증을 위한 해상실증이 본격적으로 추진되고 있다. 본 연구에서는 연안선박에 적용하기 위한 디지털트윈 기술 관련 실증선박과 육상 플랫폼(원격지원센터)의 설계를 위한 기초연구를 진행하였다. 디지털트윈 기술을 선박에 적용하 기 위해 8m 소형 배터리 전기추진선박을 대상으로 선정하였으며, 선박과 육상 플랫폼 간 통신을 통해 선박 항해 및 운전 데이터가 서버 시스템에 저장되고 전기추진선박의 원격제어 명령이 가능한 디지털트윈 통합 플랫폼의 기본 설계를 진행하였다. 이러한 디지털트윈 기술 을 적용한 선박 성능관리, 운항 및 운영 최적화, 예지제어 등이 가능할 것으로 판단되며, 위기상황에 대응이 가능한 안전하고 경제성 있는 디지털트윈 기술의 선박적용이 가능할 것이라 사료된다.

Investigations and monitoring of environmental radiation are important for preventing expected accidents or for early detection of unexpected accidents, in nuclear facilities and the surrounding. In the event of an environmental radiation accident, it should be possible to identify and analyze the radiation-contaminated area. Therefore, a rapid radiation monitoring system is required for immediate response and necessary measures. In this study, the distribution of radiation mapping is performed on a contaminated area using 2-dimensional or 3-dimensional contour mapping techniques. The entire surrounding area can be understood at a glance by displaying the radiation contour line on the map of the measured area.

Radioactive waste generated in large quantities from NPP decommissioning has various physicochemical and radiological characteristics, and therefore treatment technologies suitable for those characteristics should be developed. Radioactively contaminated concrete waste is one of major decommissioning wastes. The disposal cost of radioactive concrete waste is considerable portion for the total budget of NPP decommissioning. In this study, we developed an integrated technology with thermomechanical and chemical methods for volume reduction of concrete waste and stabilization of secondary waste. The unit devices for the treatment process were also studied at bench-scale tests. The volume of radioactive concrete waste was effectively reduced by separating clean aggregate from the concrete. The separated aggregate satisfied the clearance criteria in the test using radionuclides. The treatment of secondary waste from the chemical separation step was optimally designed, and the stabilization method was found for the waste form to meet the final disposal criteria in the repository site. The final volume reduction rates of 56.4~75.4% were possible according to the application scenario of our processes under simulated conditions. The commercial-scale system designs for the thermomechanical and chemical processes were completed. Also, it was found that the disposal cost for the contaminated concrete waste at domestic NPP could be reduced by more than 20 billion won per each unit. Therefore, it is expected that the application of this technology will improve the utilization of the radioactive waste disposal space and significantly reduce the waste disposal cost.

Decommissioning waste is generated at all stages during the decommissioning of nuclear facilities, and various types of radioactive waste are generated in large quantities within a short period. Concrete is a major building material for nuclear facilities. It is mixed with aggregate, sand, and cement with water by the relevant mixing ratio and dried for a certain period. Currently, the proposed treatment method for volume reduction of radioactive concrete waste was involved thermomechanical and chemical treatment sequentially. The aggregate as non-radioactive materials is separated from cement components as contaminated sources of radionuclides. However, to commercialize the process established in the laboratory, it is necessary to evaluate the scale-up potential by using the unit equipment. In this study, bench-scale testing was performed to evaluate the scale-up properties of the thermomechanical and chemical treatment process, which consisted of three stages (1: Thermomechanical treatment, 2: Chemical treatment, 3: Wastewater treatment). In the first stage, lab, bench, and pilot scale thermomechanical tests were performed to evaluate the treated coarse aggregate and fines. In the second stage, the fine particles generated by the thermomechanical treatment process, were chemically treated using dissolution equipment, after then the removal efficiency and residual of cement in the small aggregate was compared with laboratory results. The final stage, the secondary wastewater containing contaminant nuclides was treated, and the contaminant nuclides could be removed by chemical precipitation method in the scale-up reactors. Furthermore, an additional study was required on the solid-liquid separation, which connected each part of the equipment. It was conducted to optimize the separation method for the characteristics of the particles to be separated and the purpose of separation. Therefore, it is expected that the basic engineering data for commercialization was collected by this study.