In this research, the experimental works were conducted to study the quality control for the compressive strength and pavement thickness of Hwangtoh concrete(21MPa) using the ultrasonic pulse velocity method and the impact echo method of nondestructive test methods based on the stress waves.

This survey was conducted to analysis the facilities safety management of presbyterian churches in the central cities and urban areas. As a result, it need to support the knowledge of safety and protestant religious facilities partial help which located in urban areas.

As a eco-friendly material, Hwangtoh (red clay) has been studied for complete or partial replacement of portland cement consisted in concrete. In this research, the experimental works were conducted to study the initial quality control for the compressive strength of Hwangtoh concrete (24MPa) using the ultrasonic pulse velocity method and the impact echo method of nondestructive test methods.

Existing nondestructive test methods used to measure reinforcement corrosion is based on qualitative measurement of corrosion, and it has many difficulties of use because many equipment and measurement stages are required for application at actual sites. Accordingly, this study was conducted to estimate reinforcement corrosion of concrete structures using infrared thermography method as a method of measuring reinforcement corrosion in concrete. As for the specimen was to measure reinforcement corrosion, D13 reinforcement with size of 200×150×180mm was buried at length of 250mm for covering depth of 20mm and 40mm. Accelerated reinforcement corrosion test was carried out after placement of concrete. As a result of measuring reinforcement corrosion using infrared thermography method, temperature difference of 1~3°C was shown depending on the corrosion stage. There was a correlation in which temperature decreased according to chloride content. Infrared thermography method was confirmed as a useful method for measurement of reinforcement corrosion inside concrete.

In this study, analyzed of the correlation UPVand the compressive strength of structural timber. As a result, increased of UPV in accordance with the compressive strength increases. Though more experiments, judgment to be possible to estimate the compressive strength of the structural timber with UPV

The purpose of this study was to analyze flexural behavior of concrete beams with steel bar and FRP reinforcement. An investigation was performed on the influence of the flexural stiffness, cracking, deflection behavior. Specimen with FRP reinforcement showed a higher strength than specimen with only steel bar. Concrete strength had an effect on improvement in flexural strength and ductile deformation.

In this study, the experiments were carried out in order that flexural behavior evaluated High-strength Concrete Beams reinfrced with FRP plates according ro replacement ration of recycled aggregate. As a result, maximum load was higher than existiong of unreinforced when the reinforced with FRP plates and no decrease in load about increased fo replacement ration of recycled aggregate. Some specimens was greater than ACI 440-2R referemce value.

Recently, as increasing interests in Korean-style house, the government has promoted the policy that encourage constructing Korea-style house fabricated timber though the improvement of the related law and administration system. Also, the perception for historic preservation has been increased in respond to heightened interest. In this paper, External bond and Near surface mounted was used as the way to reinforce timber structure’s durability. bond strength for specimens with different bond length was investigated.

본 연구는 순환굵은골재 콘크리트의 활용성 증대 및 규준 정립에 관한 연구의 일환으로 순환굵은골재 치환율에 따른 고강도 철근콘크리트 보의 휨 특성을 검토하고자 한다. 실험은 콘크리트 설계강도 40MPa, 50MPa, 60MPa 순환굵은골재 치환율 0%, 30%, 50%, 100%를변수로 총 12개의 실험체를 제작하여 최종 파괴 시까지 변위제어 방식에 의해 2점 가력하였다. 실험결과 천연골재를 사용한 실험체와 비교시 균열발생 및 파괴양상의 경우, 순환굵은골재를 사용한 철근콘크리트 보의 실험체는 천연골재 철근콘크리트 보 실험체에 비해 균열이 비교적 압축측까지 진전하는 특성을 보였으나 전반적으로 균열양상은 유사하게 나타났으며, KCI 설계기준식에 의한 계산값 및 실험결과의 비교결과 순환굵은골재 치환율에 관계없이 1.08~1.29로 기준값을 상회하는 것으로 나타나 순환굵은골재를 사용한 콘크리트 보의 휨 부재설계에 적용 가능할 것으로 판단된다. 따라서 순환굵은골재 활용성 증대를 위해 추가적인 실험을 통하여 순환굵은골재의 구조적 기준정립이 필요할 것으로 판단된다.

In this study, we produced satellite-based drought indices such as NDVI(normalized difference vegetation index), NDWI(normalized difference water index), and NDDI(normalized difference drought index) and extracted time-series principal components from the drought indices using EOF(empirical orthogonal function) method to examine their relationships with climatic variables. We found that the first principal components of the drought indices for Sonid Right Banner, Inner Mongolia were dominant in cold seasons and were closely related to low temperature, little rainfall, and high surface albedo. The satellite-based drought indices and their EOF analyses can be utilized for the studies of cold-season drought and warm-season drought as well.

In this study, the amount of construction waste created from Demolition and reconstruction of old buildings by environmental contamination by construction waste has been raised as a social problem, according as a means to settle problems the government is being encouraged the use Recycled aggregate. However recycled aggregate has not yet been applied to structures in many cases. Due to uncertain technical verification of long-term durability, the use of recycled aggregate is being limited. Accordingly in this study, High Strength Concrete Beams use Recycled coarse Aggregate to evaluate the performance of the bending and establish national standards for structural design of recycled aggregates aims to provide the basic data.

In the case of cultural properties, each member has a cultural value and replacing of damaged wood is not easy. In addition, state of our country research for repair and reinforcement of timber are still incomplete. since 2008, research of the reinforcement method using CFRP plate has started. in this study, experiment for the adhesion strength along attachment length of surface bonded and NSM using CFRP plate. As a result, the adhesive strength is increased depend on increased of the adhesion area, measured the change of intensity according to the species of the wood.

As the building maintenance and safety management have recently been brought to attention, the utilization of non-destructive testing methods for internal inspection of concretes is increasing. Non-destructive testing methods, unlike typical destructive testing methods that deconstruct or cut the building in case of issues such as pores, heterogeneous material, cracks or any such equivalent issues inside/outside the building, refer to the testing methods for pores, heterogeneous material, or defectiveness occurring in the specimen without changes or destruction of internal structure using ultrasound, radiation, electromagnetism, fluid, heat, or light. In this study, among such non-destructive testing methods, the impact echo method was used for an experiment to estimate the steel rebar location and thickness in the concrete mock member.

In this study, we aimed to consider the inspection without destroying the specimen using the Impact Echo Method of nondestructive test using stress wave in an objective manner for detecting defects in concrete members. As a result of estimating the thickness of the concrete slab member using Impact Echo Method under the influence of the result of the stress wave, the average error in the 7.49% confirmed the applicability. In addition, we can check the possibility of data acquisition and construction of concrete structures for the construction of the diagnosis system

In this study, I tried to derive the expression intensity estimation through analyzing the correlation between wave velocity and compressive strength of high-strength concrete and normal-strength one, using ultrasonic pulse velocity which is one of the non-destructive tests which do not damage the structure. By producing a material age strength and body separate experiment which is applied to the ultrasonic pulse velocity, we have derived the estimating compressive strength such as a formula strength of normal-strength concrete : Fc=0.0841vp3.6018, R2=0.82 high strength concrete : Fc=0.0008vp6.9287, R2=0.88. As a result of this verification experiment, the estimated error rate of the compressive strength of normal strength concrete is 16.32%, in the case of high-strength concrete is now 7.58 percent.

Part of the domestic construction practice and non-destructive inspection technology world level is often inadequate to provide the test results to serve as a basis for evaluating the safety of the structure. Therefore, in this study, is intended to provide basic data for legislation nondestructive inspection in Japan, estimates the size of the column using a technique reverberation impact manufactured column member or this purpose. 3% maximum error rate, the result was 1% minimum error rate. The average error rate is 1.6%, revealed as well as the size of the columns that have been measured

In this study, specimens were produced to reach design standard strengths 40, 50 and 60MPa on age 28 days to evaluate the usability of high strength recycled aggregate concrete and the applicability of compressive strength by Impact Echo method and numerical analysis, and after 0, 30, 50 and 100% recycled coarse aggregates were substituted and mixed into each combination, totally 12 combinations were set. And, through compressive strength test, Impact Echo method, shock reverberation technique and numerical analysis on 1, 3, 7 and 28 days of age

구조최적화는 최근 CAD와 컴퓨터 기술이 발전하면서 구조설계부분에 널리 이용되고 있다. 본 연구에서는 30층의 강구조물을 대상으로 유한요소해석 및 어댑티브 시뮬레이티드 어닐링 알고리즘을 이용하여 최적중량설계를 구현하였다. 최적설계는 모든 설계상수와 설계하중들이 주어졌을 때, 목적함수가 최소로 됨과 동시에 모든 설계제약조건을 만족시키는 설계변수를 결정하는 설계법이라고 정의할 수 있다. 최적설계 구현을 통해 건설 측면에 있어 성능 향상과 신뢰도 향상 효과를 가져 올 수 있을 것이다.