한국 땅나리와 섬말나리의 수요는 최근까지도 늘어났지만 종자 상태에서 개화에 이르기까지 확률은 낮은 편으로 자생지에서의 개체수는 해마다 감소하였다. 본 연구는 땅나리(Lilium callosum Siebold & Zucc.)와 섬말나리(L. hansonii Leichtlin ex D.D.T. Moore)의 대량증식을 도모하기 위하여 종자 발아에 유리한 주·야간 온도 조건과 적합한 GA3 농도를 알아보는 것을 목적으로 수행되었다. 땅나리 종자는 2017년 10월 24일 강원도 춘천히 둔산면 원창리(37°47’10.00”N, 127°44’31.00”E), 섬말나리 종자는 2017년 10월 2일 울릉도 울릉군 북면 나리 (37°31’27.06”N, 130°52’25.08”E)에서 채종하였다. 땅나리와 섬 말나리 종자들을 주·야간 15/5, 20/10, 25/15, 20/20°C의 환경 조절상에서 처리구 당 30립씩 3반복으로 치상하여 온도 처리 실험을 진행한 후, 발아율 결과가 가장 우세했던 온도 조건의 환경조절상에서 섬말나리 GA3 처리 실험을 추가로 진행하였다. 온도 처리 실험결과 땅나리는 20/20°C의 온도 조건에서 발아율이 95.0%로 가장 높았으며 평균발아소요일수 또한 10.1일로 가장 낮았다. 섬말나리는 20/20°C의 온도 조건에서 발아율이 78.8%로 가장 높았으며 평균발아소요일수 또한 40.1일로 가장 낮았다. 이를 토대로 20/20°C에서 실시한 섬말나리 GA3 처리 실험은 증류수를 대조구로하여 200, 400, 800mg･L-1의 농도로 상온에서 24시간 침지한 후 처리구 당 20립씩 3반복으로 치상하였다. 그 결과 대조구에서 81.6%로 가장 높은 발아율을 나타냈으며 평균발아소요일수는 200mg･L-1처리구에서 37.1일로 가장 낮았다. 이러한 실험 결과를 바탕으로 땅나리와 섬말나리의 주·야간 발아 최적 온도는 20/20°C이며 GA3 24 시간 처리는 섬말나리 종자 발아에 효과가 없는 것으로 판단 되었다.

Cu/PET composite films are widely used in a variety of wearable electronics. Lifetime of the electronics is determined by adhesion between the Cu film and the PET substrate. The formation of an anisotropic nanostructure on the PET surface by surface modification can enhance Cu/PET interfacial adhesion. The shape and size of the anisotropic nanostructures of the PET surface can be controlled by varying the surface modification conditions. In this work, the effect of Cu/PET interface nanostructures on the failure mechanism of a Cu/PET flexible composite film is studied. From observation of the morphologies of the anisotropic nanostructures on plasma-treated PET surfaces, and cross-sections and surfaces of the fractured specimens, the Cu/PET interface area and nanostructure width are analyzed and the failure mechanism of the Cu/PET film is investigated. It is found that the failure mechanism of the Cu/PET flexible composite film depends on the shape and size of the plasmatreated PET surface nanostructures. Cu/PET interface nanostructures with maximal peel strength exhibit multiple craze-crack propagation behavior, while smaller or larger interface nanostructures exhibit single-path craze-crack propagation behavior.

본 연구는 도심지 경관용으로 식재되는 초화류의 일조부족에 따른 관상성의 차이를 평가하기 위하여 수행하였다. 생장 특성에 따라 수직형, 부채꼴형, 반구형 식물 6종을 대상으로 7개월간의 차광처리 후 생장 특성을 조사하였다. 이 후 각 생장 유형에 따라 형태, 밀도, 색상 등의 관상 특성을 표현할 수 있는 산출식을 도출하였다. 차광처리 전, 후 식물 생육을 측정 한 후 산출식에 따라 관상가치를 평가한 결과 가우라는 자생 지 환경에서의 관상가치를 5점으로 하였을 때 50% 차광에서 0.66점 낮았고, 돌단풍은 80%에서 0.99점 부족한 관상성을 나타냈다. 다양한 환경조건에서 식물들의 생장 패턴을 유형화하는 등의 지속적인 경관식물의 가치 정량화에 대한 후속연구를 통해 도심지 녹지의 질을 높이는데 다양한 식물이 활용될 수 있게 함으로써 관상식물의 부가가치 향상을 기대할 수 있을 것이라 사료된다.

This study aimed to examine the effect of a mild elevation in serum cholesterol level in a porcine coronary overstretch restenosis model using a balloon angioplasty catheter or drug-eluting coronary stent. Pigs were divided into two groups and were fed a commercial normal diet (CND, n = 4) or a high-fat diet (HFD, n = 4) for 5 weeks. Coronary overstretch injury by balloon angioplasty or stent implantation was induced in the left anterior descending and left circumflex artery after 1 week of feeding. Histopathological analysis was performed at 4 weeks after coronary injury. During the experiment, the total cholesterol level in the HFD group increased by approximately 44.9% (from 65.9 ± 3.21 mg/dL at baseline to 95.5 ± 9.94 mg/dL at 5 weeks). The lumen area in the CND group was reduced in comparison with that in the HFD group after balloon angioplasty. After stent implantation, the injury score showed no significant difference. There were significant differences in the neointimal area (2.7 ± 0.33 mm2 in the CND group vs. 3.3 ± 0.34 mm2 in the HFD group, p<0.05), lumen area (2.6 ± 0.54 mm2 in the CND group vs. 2.0 ± 0.33 mm2 in the HFD group, p<0.05), and percent area stenosis (52.0 ± 7.96% in the CND group vs. 62.4 ± 5.15% in the HFD group, p<0.05). Body weight change was not different between the two groups. Increased serum cholesterol level activated vascular smooth muscle cell proliferation in the porcine coronary overstretch model.

PURPOSES : Almost every design method for airport concrete pavements considers only traffic loading and not environmental loading. This study proposes a mechanistic design method for airport concrete pavements, that considers both environmental and traffic loading simultaneously. METHODS: First, the environmental loading of concrete pavements in Korean airports was quantified. FEAFAA, a finite element analysis program for airport pavements, was used to calculate the maximum tensile stress (MTS) of the slab, caused by both environmental and traffic loadings. The factors that influence the MTS were identified via sensitivity analysis, and an MTS prediction model was developed using the statistical analysis program SPSS. The ratio of MTS to the tensile strength of slab was calculated using the prediction model. The fatigue model under the AC 150/5320-6E and AC 150/5320-6F standards of the FAA was corrected to make it suitable for the predicted stress-strength ratio. RESULTS : The MTS prediction model and corrected fatigue model were used to redesign the slab thickness and joint spacing of airport concrete pavements originally designed using the AC 150/5320-6D standard, which empirically considers traffic loading only. As a result, different slab thicknesses and joint spacings were redesigned with consideration for environmental loading, specifically the weather conditions of airports. . CONCLUSIONS: The slab thickness and joint spacing can be mechanistically designed at the same time, whereas previously, only the slab thickness was designed, and the joint spacing was determined empirically.

Hay-making is one of the most common way for forage preservation in livestock industry. The quality and production of hay could be affected by various factors. This experiment was conducted to investigate the effect of tedding time and frequency on drying rate and feed value of forage rye (Secale cereale L.) hay. Rye was harvested on heading stage using mower conditioner. Hay was tedded at each set hour(09:00, 13:00 and 17:00) and sampled at each set hour to determine dry matter (DM) content. After two months’ preservation, CP (crude protein), ADF (acid detergent fiber), NDF (neutral detergent fiber), IVDMD (in vitro dry matter digestibility), TDN (total digestible nutrient), RFV (relative feed value), DM loss, visual scores and total fungi count were determined for estimation of hay quality. Tedding was necessary for both speeding up drying rate and improving forage quality. Tedding at 17:00 showed lower NDF content (p<0.05), and also higher RFV value was found compared with tedding at 9:00 and 13:00 (p<0.05). On the other hand, it was observed that more DM losses would be found when tedding later (p<0.05). Tedding in 1~3 times per day were lower in ADF and NDF content (p<0.05), increased CP, TDN and RFV (p<0.05), got less DM loss (p<0.05), and contained less fungi during conservation compared with no tedding (p<0.05). On the other hand, tedding too frequent caused more DM loss (p<0.05). In conclusion, for shorter drying process and higher quality of forage rye hay, tedding at 13:00∼17:00 for 1∼2 times per day was recommended in this study.

This study aims to investigate the effect of the core capability of products in eco-friendly stores on perceived CSR and consumers’ purchasing behavior. It is also to verify the moderating mediation effect of store type (multi-category store vs. single-category store). The results indicate that generally, in eco-friendly stores, consumers perceive the core competency of the products, which increases perceived CSR and purchasing intention. In the single-category store (i.e., fashion only) compared to the multi-category store (i.e., food and fashion), consumers perceive that the core capability and CSR are higher and thus they have higher purchase intention.

Chamaecyparis obtusa is one of the economical conifers planted in Korea due to its good quality timber and wood characteristics. Individuals of C. obtusa containing high terpenes (HT) and low terpenes (LT) were selected for by colorimetric method. The HT of C. obtusa was delayed in wilting against various abiotic stresses compared to the LT plants. The HT group exposed to UV did not significant influence the chlorophyll content, and the chlorophyll value was higher in the HT group than the LT group. Also, chilling treatment (5℃) did not significant influence on the chlorophyll content. However treatment at -4℃ showed relatively low chlorophyll content in the LT group than the HT group. Plants exposure to high temperature was not a difference between the HT and the LT group. However, treatment at 38℃ influenced the chlorophyll content that was increased exposure time-dependently. In salt treatments, chlorophyll in the HT group was lower at high concentrations (300 and 500 mM) of NaCl. However, chlorophyll content increased to slightly in treatment time-dependently, which is 6.7% to 40%. H2O2 treatment has been a negative effect on the chlorophyll content in the HT group. All concentration of H2O2 decreased the chlorophyll content of 5% to 35%. Plants containing high terpenoids were resisted against some abiotic stress such as salt and H2O2. Our results implied that terpenoids could cause various abiotic stress resistance. These results could be utilized for efficient management and biomass production during forest silvicultures.

The Gwangneung arboretum, affiliated to the Korea Forest Research Institute, was established in 1987 and it became the Korea National Arboretum (KNA) in May 24, 1999. The entomological collection of KNA currently holds a total of 510,365 specimens of 6,849 species including more than 330 type specimens of Lepidoptera, Hemiptera, Hymenoptera, and Coleoptera are deposited. As the results of recent systematic studies by KNA entomologists, 67 new species were described, and 108 species were newly recorded from Korea and other countries. Not only we have conducted taxonomic studies but also have broaden our research boundary to natural enemy surveys for pine wilt disease vectors, plant and insect interaction, and exotic insect species monitoring. In this presentation, we would like to briefly introduce current entomological researches of KNA in the hope of future collaborations with other entomologists.

고온기 화색발현이 우수하고 연중생산이 가능한 수출용 스프레이국화 신품종을 육성하기 위하여 충남농업기술원 화훼 연구소에서 2010년 분홍색의 모본 ‘Borami’를 방임수분하였다. 2011년에 종자를 파종하였고, 이중 화형과 화색이 우수한 개체를 선발하여 ‘SP11-148-01’로 계통명을 부여하였다. 2011년부터 2013년까지 주년 생산성을 위해 전조, 자연, 차광재배로 특성을 각각 검정하였고, 생육 및 개화특성은 화형과 화색이 비슷한 자주색 스프레이국화인 ‘Kingfisher’를 대조품종으로 조사하였으며, 2013년 ‘Yes Ruby’로 품종등록 출원하였다. ‘Yes Ruby’는 자주색의 설상화와 연녹색의 통상화로 가을 작형 개화기는 10월 24일로, ‘Kingfisher’의 10월 29일에 비해 빨랐다. ‘Yes Ruby’의 초장과 줄기굵기는 각각 94.9cm와 7.7mm로 ‘Kingfisher’의 89.2cm와 6.4mm보다 컸다. ‘Yes Ruby’의 꽃 직경은 6.2cm로 ‘Kingfisher’의 5.0cm보다 컸으며, 꽃잎수도 ‘Yes Ruby’가 25.7개로 ‘Kingfisher’의 23.3개보다 많았다. 착화수는 두 품종 모두 비슷하였으며, 흰녹병 저항성은 ‘Yes Ruby’가 2단계, ‘Kingfisher’는 3단계의 감염 정도를 나타내어 흰녹병에 대한 저항성이 높은 것으로 나타났다. 재배상 유의사항은 ‘Yes Ruby’는 겨울철 균일한 개화가 이뤄지지 않아 겨울철 야간온도를 18℃ 이상으로 관리해줌으로써 균일개화를 유도할 수 있다. 또한 생장억제제인 Daminozide을 처리함으로써 설상화수를 늘려 볼륨감 높은 꽃봉오리를 형성할 수 있어 고온기에도 화색발현이 우수하고 연중생산이 가능하여 안정적 수출을 통한 농가소득 증대에 기여할 수 있을 것으로 기대된다.