이 연구에서는 단일 활성화제로 활성화시킨 슬래그 기반 섬유보강 복합재료의 초기재령에서 인장거동을 조사하였다. 실험 결과, 활성화제 종류에 따라 재령 7일에서 균열강도, 인장강도, 인장변형성능에 차이가 있었으며, 규산나트륨을 활성화제로 사용한 배합이 가장 큰 인장변형성능을 나타내었다.

In this paper, fracture behavior of high-strength SFRC with high tensile strength steel fiber was investigated. Two different steel fibers with tensile strength of 1,200 and 1,600 MPa was used in SFRC specimens. Tst results showed that fracture behavior was more ductile with increasing the steel fiber tensile strength.

The purpose of this study was to evaluate the direct tensile fracture behavior of steel fiber hybrid reinforced cement composite by strain rate. Experiment result, it was confirmed that SSF suppressed the microcrack around the HSF at the strain rate 101/s, which resulted in the improvement of the pullout resistance of the HSF.

This paper evaluates analytically the flexural behavior of steel fiber reinforced concrete (SFRC) notched beams according to the tensile strength of steel fiber. For this purpose, compressive strength and bending tests of SFRC applying steel fibers with tensil strength of 1,200 and 1,600 MPa was conducted. Strain hardening behavior was observed when using high tensile strength steel fiber. Compression and tensile models were established through test results. For the tensile model, hordijk model and trilinear model were analyzed and compared. The results of analysis showed good agreement when using trilinear model.

The purpose of this study was to evaluate the direct tensile fracture behavior of fiber hybrid reinforced cement composite by strain rate. Experiment result, it was confirmed that PVA suppressed the microcrack around the steel fiber at the strain rate 101/s, which resulted in the improvement of the pullout resistance of the steel fiber.

이 연구에서는 PE 섬유를 사용한 고연성 시멘트 복합체에 대해 최대입경 4.75 mm의 일반모래(강모래)를 규사와 서로 다른 비율로 혼합하여 사용하였을 때, 그에 따른 고연성 시멘트 복합체의 인장거동 변화를 실험을 통해 살펴보고자 하였다. 유동성 평가 실험에서는 강모래 치환율이 증가함에 따라 유동성이 증가하는 것으로 나타났다. 압축강도는 평균압축강도에는 큰 차이가 없었으나, 편차의 크기가 강모래 치환 율이 증가할수록 증가하는 것으로 나타났다. 일축인장시험 결과에서는 강모래 치환율에 따른 인장강도의 변화는 거의 없는 것으로 나타났으 며, 인장변형률 성능에서는 강모래 치환율이 증가함에 따라 향상되는 결과를 나타내었다. 강모래 치환율이 증가함에 따라 다중균열의 분포밀 도가 증가하면서 인장변형률 성능의 향상된 것으로 보인다. 한편, 인장변형률 성능의 편차는 압축강도에서와 마찬가지로 강모래 치환율이 증 가함에 따라 커지는 양상을 나타내었다. 이 연구를 통해 규사 대신 일반모래를 사용한 경우에도 고연성 시멘트 복합체의 인장거동의 변동성은 증가하지만, 규사를 사용한 고연성 시멘트 복합체와 비교할 때 등가 이상의 인장성능을 나타낼 수 있음을 확인하였다.

In this study, the fiber blending ratio and strain rate effect on the tensile behavior of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber and polyvinyl alcohol fiber were used for reinforcing fiber. The fiber blending ratio of HSF+PVA were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, the tensile strength, strain capacity and fracture toughness of the hooked steel fiber reinforced cement composites were improved by the increase of the bond strength of the fiber and the matrix according to increase of strain rate. However, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by micro cracks in the matrix around hooked steel fiber. On the other hand, PVA fiber showed cut-off fracture at strain rate 10-6/s with multiple cracks. However, at the strain rate 101/s, the multiple cracks and strain capacity were decreased because of the pull-out fracture of PVA fiber. The HSF1.5PVA0.5 shown the highest tensile strength because the PVA fiber suppressed the micro cracks in the matrix around the hooked steel fiber and improved the pull-out resistance of hooked steel fiber. Thus, DIF of strain capacity and fracture toughness of HSF1.5PVA were greatly improved. In addition, the synergistic response of fracture toughness was positive because the tensile stress was slowly decreased after the peak stress by improvement of the pull-out resistance of hooked steel fiber at strain rate 101/s

This study was aimed to investigate the tensile behaviors of PE fiber-reinforced highly ductile cementitious composites with different combinations of micro silica sand and normal sand with maximum particle size of 4.75mm. This study presented the feasibility of using normal sand instead of micro silica sand for highly ductile cementitious composites with equivalent or better uniaxial tensile performance.

The purpose of this study was to evaluate the tensile fracture behavior of fiber hybrid reinforced cement composite according to the strain rate. Experiment result, it was confirmed that the number of cracks and the strain capacity tended to decrease with increasing PVA fiber volume fraction at the strain rate of 101/s.

초고성능 콘크리트와 고연성 무시멘트 복합재료는 높은 압축강도 및 높은 연성 등 재료의 우수한 성능으로 인하여 유망한 건설재 료로 분류되고 있다. 이 연구의 목적은 초고성능 콘크리트와 고연성 무시멘트 복합재료의 압축강도와 인장거동에 대하여 실험적으로 조사하 여 성능을 비교하는 것이다. 이를 위하여 밀도, 압축강도, 일축인장실험 등 일련의 실험을 수행하였다. 실험결과 알칼리 활성 슬래그 기반 고연 성 무시멘트 복합재료의 압축강도와 인장강도는 초고성능 콘크리트의 압축강도와 인장강도에 비하여 낮게 나타났지만, 인장하중 하에서 알칼 리 활성 슬래그 기반 고연성 무시멘트 복합재료의 인장변형성능 및 인성은 초고성능 콘크리트의 인장변형성능 및 인성에 비하여 높은 것으로 나타났다. 또한 알칼리 활성 슬래그 기반 무시멘트 페이스트에 폴리에틸렌섬유를 보강하여 7.89 %에 달하는 높은 인장변형성능을 확보할 수 있는 것으로 나타났다.

This study was aimed to investigate the effect of aggregate size on the tensile behavior of highly ductile fiber-reinforced cementitious composites. Partial applying 5.6mm coarse aggregate instead of micro silica sand was considered. It was revealed that the fiber-reinforced cementitous composites with 5.6 mm coarse aggregate as well as micro silica sand still showed enough tensile strain capacity more than 5% and limited crack width less than 150 ㎛.

This study was aimed to investigate the effect of aggregate size on the tensile behavior of highly ductile fiber-reinforced cementitious composites. Partial applying 5.6mm coarse aggregate instead of micro silica sand was considered. It was revealed that the fiber-reinforced cementitous composites with 5.6 mm coarse aggregate as well as micro silica sand still showed enough tensile strain capacity more than 5% and limited crack width less than 150 ㎛.

This study was aimed to investigate the effect of aggregate size on the tensile behavior of highly ductile fiber-reinforced cementitious composites. Partial applying 5.6mm coarse aggregate instead of micro silica sand was considered. It was revealed that the fiber-reinforced cementitous composites with 5.6 mm coarse aggregate as well as micro silica sand still showed enough tensile strain capacity more than 5% and limited crack width less than 150 ㎛.

This paper describes the effects of tensile strength and aspect ratio of steel fiber on flexural behavior of high-strength SFRC notched beam. Test results indicated that flexural properties of SFRC improved with increasing in aspect ratio and tensile strength of steel fiber.

The purpose of this paper is to evaluate the flexural strength and deflections developed of FRC beam with tensile bars composed of two layers combinations of steel bar, GFRP bar, and CFRP bar. As a test result, specimen with CFRP bars had the greatest maximum flexural strength. Specimens with FRP bars had more brittle failure behavior than only steel bars.

An experimental study was performed to examine the effect of fiber content on the tensile behavior of PE fiber reinforced cement composite. The experiment with the range 0~2.0% fiber content revealed that 1.5% fiber content produced the greatest tensile strength and strain.

In this study, We evaluated the applicability of high performance fiber reinforced cementitious composite (HPFRCC) with compressive strength of 180, 140 and 100 MPa and identical contents in steel fiber. The analysis of the flexure tensile behavior showed that HPRFCC presents deflection hardening after the initiation of cracks and exhibits higher energy absorbing capacity with high compressive strength.

This research investigated the effects of matrix strength on the direct tensile behavior of high performance hybrid fiber reinforced cementitious composites (HPHFRCCs) at high strain rates. 3 different type matrixes were used (56 MPa, 81 MPa and 180 MPa). And macro fiber was long hooked fiber (H, =0.3 mm,=30 mm) and micro fiber was short smooth fiber (S, =0.2 mm,  =13 mm). The volume content of macro fibers was 1.0% and the volume content of micro fibers was 1.0%. The high matrix strength clearly increased the tensile strength and peak toughness of HPHFRCCs even at high strain rates (74 ~ 161 /sec).

초고성능 콘크리트는 높은 강도와 유동성을 갖는 우수한 재료 특성을 나타내는 콘크리트이다. 그러나 고연성 시멘트 복합체에 비하여 낮은 연성을 나타낸다. 이 연구에서는 강섬유와 마이크로섬유의 조합이 초고성능 콘크리트의 인장거동에 미치는 영향을 조사하였다. 이를 위하여 강섬유와 폴리에틸렌, 폴리비닐알코올, 현무암섬유 조합에 따라 4가지 초고성능 콘크리트 배합을 결정하였고, 인장거동을 평가하기 위하여 직접인장 실험을 수행하였다. 또한 마이크로섬유가 제조과정에서 의도하지 않은 과도한 기포를 생성하는지를 확인하기 위하여 밀도 실험을 수행하였다. 실험결과 인장강도가 높은 폴리에틸렌섬유는 초고성능 콘크리트의 인장거동을 향상시키는데 효과적임을 확인하였고, 현무암섬유는 초고성능 콘크리트의 균열강도 및 인장강도를 증가시키는데 효과적임을 확인하였다. 또한 마이크로섬유가 의도하지 않은 기포를 생성하지 않는다는 것도 확인하였다.

This research investigated the effects of adding micro fibers on the direct tensile behavior of ultra-high-performance hybrid-fiber-reinforced concrete (UHPHFRC) at high strain rates. Macro fiber was long smooth fiber (LS, Df=0.3mm, Lf=30mm) and micro fiber was short smooth fiber (SS, Df=0.2mm, Lf=13mm). The volume content of macro fibers was 1.0% and the volume content of micro fibers varied between 0.0 and 1.0%. The addition of micro fibers clearly increased the tensile strength of UHPHFRCs even at high strain rates.