딸기는 다년생 초본성 식물로 그 과실은 영양 가치가 높고 인기있는 고부가가치 채소작물이다. 본 연구는 딸기 품종 ‘설향’과 ‘매향’의 런너유인각도(RTA)가 절간장과 런너 발생수에 미치는 영향을 조사하여 자묘의 생산성을 높이고 번식효율을 증가시키기 위한 기초 자료를 얻고자 수행되었다. 러너를 0°(상향), 45°, 90°(수평), 135°, 또는 180°(하향)의 각도로 한 달 간 유인하였다. 이 실험은 유리온실에서 주간/야간 온도 29/20°C, 평균 광도 450 μ mol m-2·s-1 PPFD의 자연광 환경에서 수행하였으며, 1일 광주기는 12시간이었다. ‘설향’과 ‘매향’에 있어서 RTA는 런너 수와 절간장에 영향을 주었으며, 자묘 수, 생체중과 건물중에 영향을 미쳤다. RTA 135° 또는 180°에서 두 품종 모두 자묘의 평균 생체중과 건물중이 가장 작았으며, ‘설향’ 품종에서는 런너 길이와 절간장이 짧아졌다. RTA가 두 품종 모두에서 런너의 직경에는 영향을 미치지 않았지만 런너의 형태에는 영향을 미쳤다. RTA중 135°와 비교해서 180°가 가장 많은 자묘를 생산하여 가장 번식효율이 좋았다.

Menton (Me) deviation is commonly used for diagnosing facial asymmetry. This study compared angle and distance measurement in determining the severity of Me deviation for facial asymmetry diagnosis. Three-Dimensional Computed Tomographic(3D CT) images of 32 patients (mean age 22.5yrs, SD 3.4yrs; 16 male, 16 female) with facial asymmetry were selected for this study. Angle and distance of Me deviation in each patient were obtained and the severity of Me deviation was determined according to the angle and the distance measurement. The severity of Me deviation by angle and distance measurement was compared and statistical analysis was performed. Eight (25%) showed disagreement in severity of Me deviation between the two measurements. The kappa coefficient on the two measurements was 0.67, showing substantial agreement. It is suggested that both angle and distance measurement be performed in determining severity of Me deivation.

In this paper, internal and external flow analysis of nozzle for a automatic bike washing machine was performed using Ansys Fluent, by varying nozzle injection pressure and angle. The pressure and velocity distributions generated at the nozzle outlet from internal flow analysis were applied for inlet condition of the external flow analysis of the nozzle. As a criterion for the cleaning efficiency, the shear stress condition provided by EHEDG[5] was used and an area of shear stress of 3 Pa or more according to the spray angle and pressure was compared. It is expected that the results of this paper will be applied to the development of automatic contactless bike washing nozzle.

In this study, the laminar burning velocity of low calorific gas fuels are verified through the comparison and examination of experimental and predicted results. The bunsen burner which has contraction nozzle is used to measure the laminar burning velocity with the cone angle method. In addition, PREMIXED code combined with two mechanism, i.e., the GRI 3.0, and USC II reaction mechanisms is used to predict the laminar burning velocity. As heating value decrease, the laminar burning velocity correspondingly decreases due to inert gases in the fuels. Through the comparison and analysis of the experimental results and the predicted results, it is confirmed that LCF 9000 and LCF 8000 with the GRI 3.0 reaction mechanism and LCF 7000 and 6000 with the USC II reaction mechanism have a similar distribution of laminar burning velocity between the experimental result and the predicted result. This similarity is due to a large amount of propane, which is not suitable for the GRI 3.0 reaction mechanism in LCF 7000 and 6000.

Winged scapular (WS) causes muscle imbalance with abnormal patterns when moving the arm. In particular, the over-activation of the upper trapezius (UT) and decrease in activity of the lower trapezius (LT) and serratus anterior (SA) produce abnormal scapulohumeral rhythm. Therefore, the SA requires special attention in all shoulder rehabilitation programs. In fact, many previous studies have been devoted to the SA muscle strength training needed for WS correction. Objects: The purpose of this study was to investigate the effect of shoulder girdle muscle and ratio according to the angle of shoulder abduction and external weight in supine position. Methods: Twenty three WS patients participated in this experiment. They performed scapular protraction exercise in supine position with the weights of 0 ㎏, 1 ㎏, 1.5 ㎏, and 2 ㎏ at shoulder abduction angles of 0˚, 30˚, 60˚, and 90˚. The angle and weight applications were randomized. Surface electromyography (EMG) was used to collect the EMG data of the SA, pectoralis major (PM), and UT during the exercise. The ratio of PM/SA and UT/SA was confirmed. Two-way repeated analyses of variance were used to determine the statistical significance of SA, PM, and UT and the ratios of PM/SA and UT/SA. Results: There was a significant difference in SA according to angle (p<.05). Significant differences were also identified depending on the angle and weight (p<.05). The angle of abduction at 0˚, 30˚ and weight of 2 ㎏ showed the highest SA activity. However, there was no significant difference between PM and UT (p>.05). There was a significant difference between PM/SA and UT/SA in ratio of muscle activity according to angle (p<.05). Significant differences were found at PM/SA angles of 30˚, 60˚ and 90˚ (p<.05). For UT/SA, significant difference was only observed at 90˚ (p<.05). Conclusion: Based on the results of this study, in order to strengthen the SA, it was found to be most effective to use 1 and 1.5 ㎏ weights with abduction angles of 0˚ and 30˚ at shoulder protraction in supine position.

본 연구는 황색점착트랩의 설치각도에 따른 해충의 유인특성을 구명하고자 실시하였다. 고설재배 딸기농장에서 황색점착트랩을 수직(단 면), 수평 앞면 및 뒷면, 45도 앞면 및 뒷면 등 5개 각도처리로 설치하고 유인된 해충수를 조사하였다. 총채벌레류(꽃노랑총채벌레 우점)와 뿌리파 리류(작은뿌리파리 우점)의 경우 45도 윗면, 수직, 수평 윗면은 45도 뒷면이나 수평 뒷면보다 많은 수가 유인되었다. 매미충류(괴테애매미충)는 수직 또는 45도 위면 트랩에서 통계적으로 많은 수가 유살되었고 전체적으로 45도 뒷면, 수평 윗면이나 뒷면은 적은 수가 유살되었다. 진딧물류 (목화진딧물 우점)와 가루이류(딸기가루이 우점)는 발생밀도가 낮은 관계로 뚜렷한 경향이 나타나지 않았다.

Background: In previous studies, changes in postural alignment were found when the slope was changed during walking. Downhill walking straightens the trunk by shifting the line of gravity backward. Objects: This study investigated the effect of the downhill treadmill walking exercise (DTWE) on thoracic angle and thoracic erector spinae (TES) activation in subjects with thoracic kyphosis. Methods: A total of 20 subjects with thoracic kyphosis were recruited for this study. All the subjects performed the DTWE for 30 minutes. A surface EMG and 3D motion capture system were used to measure TES activation and thoracic angle before and after the DTWE. Paired t-tests were used to confirm the effect of the DTWE (p<.05). Results: Both the thoracic angle and TES activation had significantly increased after the DTWE compared to the baseline (p<.05). An increase in the thoracic angle indicates a decrease in kyphosis. Conclusion: The DTWE is effective for thoracic kyphosis patients as it decreases their kyphotic posture and increases the TES activation. Future longitudinal studies are required to investigate the long-term effects of the DTWE.

This Study is carried out to stabilize the system according to the change of superheat and subcooling in binary refrigeration system by applying cascade system. When the system on 1 st stage was started and the system on the other side was operated, a temperature reversal phenomenon occurred in which the temperature of the 1 st cascade outlet was temporarily lowered. This means that the condensate heat exchange on the 2 nd is not good, which can cause the compressor to overheated. In order to maintain stable system operation, the opening degree of the expansion valve is controlled to increase the refrigerant circulation amount, thereby facilitating the condensation heat exchange on the 2 nd stage system. We have found that the most suitable refrigerant circulation amount is found by stabilizing the operation of the system while lowerning the super low temperature from -65℃ to -70℃ and increasing again to -60℃.

본 연구에서는 수집영상의 매 프레임 MPC(mm/pixel coefficient) 업데이팅을 통해 축 방향과 상관없이 왜곡영상에 따른 변위를 보정하는 기법에 관해 다루고자 한다. 영상의 강제적 왜곡을 위해 다양한 촬영 각도를 설정하여 실험을 진행하였으며, 캠코더의 설치 위치를 통해 0°~55°까지 5° 단위로 12가지 촬영 각도를 조정해가며 영상을 수집·분석하였다. 본 실험에 앞서 영상기반 변위계측의 유효성 평가를 위한 예비실험을 수행하였으며, GPS 및 가속도계와 계측결과를 비교해보았을 때, 영상기반 변위계측 시스템은 충분한 유효성을 갖는다고 판단된다. 촬영 각도 별로 수집된 영상을 분석하여 구조물의 최대 진폭 및 추정 진동수를 검출하였으며, 검출결과 비교를 통해 촬영 각도에 의한 영향을 판단하고자 하였다. 또한 계측된 자유 진동으로부터 감쇠비를 추정하여 추가적인 비교를 수행 하였다. 분석 결과 최대 진폭 기준 0.325mm, 오차율 기준 5.72%의 미소한 오차를 나타냈다. 진동수 추정에서도 촬영 각도 50°를 제외 하고 전체적으로 1% 미만의 오차율을 보이며 매우 유사한 추정 결과를 나타냈으며, 촬영 각도가 변화에 따른 감쇠비는 최소 1.025% 에서 최대 1.189%의 추정결과를 보이며 촬영 각도와 상관없이 전체적으로 유사한 감쇠비를 나타냈다.

One of the most performed action in daily life is standing up from sitting position. As the population of the world is aging at the high rates, people may face problems with reduced muscle strength as well as psychological changes. This can lead elderly people having difficulties with standing up from chair. Now, with the aging trend worldwide, products are being developed that can support the lives of the elderly. This study examines the distribution of hip pressure in relation to the seating positions of the standing assistance seats under development to prevent standing up accidents in older adults. The currently developing standing assistant chair designed to tilt to a maximum angle of 25 degrees. At over 25°, design considers that older people are at risk of thrown back out of that force and that the forces exerted on their arms and legs can be a significant burden to older people. By considering danger of higher than 25° for older people which is experimented in the basis of static capturing approach in previous papers, it is experimented people with age group of 20~60 on 0° to 25° tilting angle on the basis of dynamic capturing method in order to pick convenient angle of inclination. Moreover, tried to find the optimum angle by comparing the hip pressure distribution when seated at the edge of the seat and at the center of the seat with the pressure distribution sensor.

One of the most performed actionin daily life is standing up from sitting position. As the population of the world is aging at the high rates, people may face problems with reduced muscle strength as well as psychological changes. This can lead elderly people having difficulties with standing up from chair. Now, with the aging trend worldwide, products are being developed that can support the lives of the elderly. This study examines the distribution of hip pressure in relation to the seating positions of the standing assistance seats under development to prevent standing up accidents in older adults. The currently developing standing assistant chair designed to tilt to a maximum angle of 25 degrees. At over 25°, design considers that older people are at risk of thrown back out of that force and that the forces exerted on their arms and legs can be a significant burden to older people. By considering danger of higher than 25° for older people which is experimented in the basis of static capturing approach in previous papers, it is experimented people with age group of 20~60 on 0° to 25° tilting angle on the basis of dynamic capturing method in order to pick convenient angle of inclination. Moreover, tried to find the optimum angle by comparing the hip pressure distribution when seated at the edge of the seat and at the center of the seat with the pressure distribution sensor.

목적: 하방 주시각도에 따라 조절력변화를 알아보고자 하였다. 방법: 문진을 통해 안질환이 없고, 조절력 이상이 없는 교정시력이 1.0 이상인 평균 연령 23.55±2.25세의 11명을 대상으로 하였다. 자각적 굴절검사를 통해 완전 교정을 하고 push-up법으로 하방 주시각도에 따른 조절력을 측정하였다. 피검자의 이마와 턱을 고정시키고 타겟을 0°, 15°, 30°, 45°의 각도로 변화시켜 각각 3회씩 단안 및 양안 조절력을 측정하였다. 결과: 단안 조절력의 경우 좌안과 우안에서 0°에서 45°를 기울였을 때 각각 4.27D, 4.05D 증가하였다(p<0.001). 양안 조절력도 주시각도가 0°에서 45°로 증가하면서 4.45D 크게 나타났다 (p<0.001). 또한, 단안과 양안 모두 주시각도가 클수록 조절력 증가의 폭은 작아지는 경향을 보였다. 결론: 단안과 양안 조절력 모두 하방 주시각도가 증가할수록 조절력의 양이 증가하였다. 따라서, push-up법을 통한 조절력 측정 시 주시각도를 정확히 제시하는 것이 필요할 것으로 생각 된다.