Nuclear power plants use ion exchange resins to purify liquid radioactive waste generated while operating nuclear power plants. In the case of PHWR, ion exchange resins are used in heavy water and dehydration systems, liquid waste treatment systems, and heavy water washing systems, and the used ion exchange resins are stored in waste resin storage tanks. The C-14 radioactivity concentration in the waste resin currently stored at the Wolseong Nuclear Power Plant is 4.6×106 Bq/g, exceeding the low-level limit, and if all is disposed of, it is 1.48×1015 Bq, exceeding the total limit of 3.04×1014 Bq of C-14 in the first stage disposal facility. Therefore, disposal is not possible at domestic low/medium-level disposal facilities. In addition, since the heavy water reactor waste resin mixture is stored at a ratio of about 20% activated carbon and zeolite mixture and about 80% waste resin, mixture extraction and separation technology and C-14 desorption and adsorption technology are required. Accordingly, research and development has been conducted domestically on methods to treat heavy water waste resin, but the waste resin mixture separation method is complex and inefficient, and there are limitations in applying it to the field due to the scale of the equipment being large compared to the field work space. Therefore, we would like to introduce a resin treatment technology that complements the problems of previous research. Previously, the waste resin mixture was extracted from the upper manhole and inspection hole of the storage tank, but in order to improve limitations such as worker safety, cost, and increased work time, the SRHS, which was planned at the time of nuclear power plant design, is utilized. In addition, by capturing high-purity 14CO2 in a liquid state in a high-pressure container, it ensures safety for long-term storage and is easy to handle when necessary, maximizing management efficiency. In addition, the modularization of the waste resin separation and withdrawal process from the storage tank, C-14 desorption and monitoring process, high-concentration 14CO2 capture and storage process, and 14CO2 adsorption process enables separation of each process, making it applicable to narrow work spaces. When this technology is used to treat waste resin mixtures in PHWR, it is expected to demonstrate its value as customized, high-efficiency equipment that can secure field applicability and safety and reflect the diverse needs of consumers according to changes in the working environment.

In our previous study, we developed a CFD thermal analysis model for a CANDU spent fuel dry storage silo. The purpose of this model is to reasonably predict the thermal behavior within the silo, particularly Peak Cladding Temperature (PCT), from a safety perspective. The model was developed via two steps, considering optimal thermal analysis and computational efficiency. In the first step, we simplified the complex geometry of the storage basket, which stored 2,220 fuel rods, by replacing it with an equivalent heat conductor with effective thermal conductivity. Detailed CFD analysis results were utilized during this step. In the second step, we derived a thermal analysis model that realistically considered the design and heat transfer mechanisms within the silo. We developed an uncertainty quantification method rooted in the widely adopted Best Estimate Plus Uncertainty (BEPU) method in the nuclear industry. The primary objective of this method is to derive the 95/95 tolerance limits of uncertainty for critical analysis outcomes. We initiated by assessing the uncertainty associated with the CFD input mesh and the physical model applied in thermal analysis. And then, we identified key parameters related to the heat transfer mechanism in the silo, such as thermal conductivity, surface emissivity, viscosity, etc., and determined their mean values and Probability Density Functions (PDFs). Using these derived parameters, we generated CFD inputs for uncertainty quantification, following the principles of the 3rd order Wilks’ formula. By calculating inputs, A database could be constructed based on the results. And this comprehensive database allowed us not only to quantify uncertainty, but also to evaluate the most conservative estimates and assess the influence of parameters. Through the aforementioned method, we quantified the uncertainty and evaluated the most conservative estimates for both PCT and MCT. Additionally, we conducted a quantitative evaluation of parameter influences on both. The entire process from input generation to data analysis took a relatively short period of time, approximately 5 days, which shows that the developed method is efficient. In conclusion, our developed method is effective and efficient tool for quantifying uncertainty and gaining insights into the behavior of silo temperatures under various conditions.

The objective of this study is development of graphite-boron composite material as a replacement for metal canisters to Improve the heat dissipation and radiation shielding performance of dry spent nuclear fuel storage system and reduce the volume of waste storage system. KEARI research team plan to use the graphite matrix manufacturing technology to pelletize the graphite matrix and adjust the content of phenolic resin binder to minimize pore formation. Specifically, we plan to adjust the ratio of natural and synthetic graphite powder and use uniaxial pressing technology to manufacture black graphite matrix with extremely high radial thermal conductivity. After optimizing the thermal conductivity of the graphite matrix, we plan to mix it with selected boron compounds, shape it, and perform sintering and purification heat treatments at high temperatures to manufacture standard composite materials.

Dry storage of nuclear fuel is compromised by threats to the cladding integrity, such as creep and hydride reorientation. To predict these phenomena, spent fuel simulation codes have been developed. In spent fuel simulation, temperature information is the most influential factor for creep and hydride formation. Traditional fuel simulation codes required a user-defined temperature history input which is given by separate thermal analysis. Moreover, geometric changes in nuclear fuel, such as creep, can alter the cask’s internal subchannels, thereby changing the thermal analysis. This necessitates the development of a coupled thermal and nuclear fuel analysis code. In this study, we integrated the 2D FDM nuclear fuel code GIFT developed at SNU with COBRA -SFS. Using this, we analyzed spent nuclear stored in TN-24P dry storage cask over several decades and identified conditions posing threats due to phenomena like creep and hydrogen reorientation, represented by the burnup and peak cladding temperature at the start of dry storage. We also investigated the safety zone of spent nuclear fuel based on burnup and wet storage duration using decay heat.

In this study, a fracture evaluation of the spent nuclear fuel storage canister was conducted. Stainless steel alloys are typically used as the material for canisters, and therefore, a separate destructive evaluation is not required for safety analysis reports. However, in this research, a methodology for conducting a destructive evaluation was proposed for assessing the acceptability of cracks detected during in-service inspections for long-term storage due to reasons such as stress corrosion cracking. For the fracture evaluation, analytical equations provided in the design code such ASME were employed, and finite element method (FEM) based linear elastic fracture mechanics (LEFM) was performed to validate the effectiveness of the analytical equations. Impact analyses such as tip-over of the storage cask on a concrete pad were performed, and the fracture evaluation using stresses resulting from the impact analysis under accident conditions and residual stresses from welds were carried out. Through this research, geometric dimensions for cracks exceeding the fracture criteria were established.

It is very important that the confinement of a spent fuel storage systems is maintained because if the confinement is damaged, the gaseous radioactive material inside the storage cask can leak out and have a radiological impact on the surrounding public. For this reason, leakage rate tests using helium are required for certificate of compliance (CoC) and fabrication inspections of spent fuel storage cask. For transport cask, the allowable leakage rate can be calculated according to the standardized scenario presented by the IAEA. However, for storage cask, the allowable leakage rate is determined by the canister, facility, and site specific information, so it is difficult to establish a standardized leakage rate criterion. Therefore, this study aims to establish a system that can derive system-specific leakage test criteria that can be used for leakage test of actual storage systems. First, the variables that can affect the allowable leakage rate for normal and accident conditions were derived. Unlike transportation systems, for storage systems, the dose from the shielding analysis and the dose from the confinement analysis are summed up to determine whether the dose standard is satisfied, and even the dose from the existing nuclear facilities is summed up during normal operation condition. For this reason, the target dose is used as an input variable when calculating the allowable leakage rate for the storage system. In addition, the main variables are the distance from the boundary of the exclusive area, the number of cask, the inventory of nuclide material in the cask, the free volume, and the internal and external pressure. Utilizing domestic and US NRC guidelines, we derived basic recommended values for the selected variables. The GASPARII computer code that can evaluate the dose to the public under normal operating conditions was utilized. Using the above variables, the allowable leakage rate is calculated and converted to the allowable criteria for helium leakage rate test. The developed system was used to calculate the allowable leakage rate for normal and accident conditions for a hypothetical storage system. The leakage rate criteria calculation system developed in this study can be useful for CoC and fabrication inspections of storage systems in the future, and a GUI-based program will be built for user convenience.

To investigate the mechanical integrity of spent nuclear fuel, the failure behavior of the cladding tube was examined under accident conditions. According to the SNL report, the failure behavior of cladding can be broadly classified into two types. The first is failure due to bending load caused by falling. The second is failure due to pinch load caused by space grid. In this study, mechanical integrity was evaluated through the stress intensity factor applied to the crack in failure behavior due to bending load. Since the exact value of the impact load due to fall was unknown, the load was applied by increasing the value up to 200 G in 20 G increments. The size of the crack is an important input variable, and 300 um was given by referring to the EPRI report, and the elastic modulus, a material property that determines the stress field, was given 75.22 GPa by referring to the FRAPCON code. Since the relationship between the direction of stress and the direction of the crack is also a major variable, simulations were conducted for both cracks perpendicular to and parallel to the stress direction. It was confirmed that at a load of 200 G, when the crack was parallel to the stress direction, stress concentration did not occur and had a very low stress intensity factor 0.01 􀜯􀜲􀜽√􀝉. When perpendicular to the direction of stress, the stress intensity factor showed a value of 1 􀜯􀜲􀜽√􀝉. However, considering that the critical value of the stress intensity factor due to hydride is 5 􀜯􀜲􀜽√􀝉, it can be seen that perpendicular result also ensures the mechanical integrity of the cladding.

Since the Fukushima nuclear accident in 2011, the development of accident tolerant fuel (ATF) has been actively pursued as an alternative to improve the safety of nuclear power plants. In addition, nuclear power plants containing ATF have recently been included as green energy in the 2022 EU taxonomy bill, receiving a lot of attention. Many countries are considering increasing 235U enrichment from 5 to 10 235U % for higher burnup and long cycle operation with ATF improving safety. To utilize ATF, the applicability of fuel storage systems such as new fuel storage vault, Region 1, and Region 2 must be determined. The purpose of this paper is to confirm the applicability of applying ATF, which is being developed in Korea, to the nuclear fuel storage system of Korean nuclear power plants. The nuclear power plant model used in the analysis is APR-1400, a representative Korean nuclear power plant model, and ATF model used in the analysis is Mo microcell UO2 pellet with CrAl coating, which is being developed in Korea. MCNP 6.2 has been used for multiplication factor calculations, and the TRITON/NEWT and ORIGEN-S modules of the SCALE code have been used for depletion calculations. From the analysis results, solutions and additional analysis would be necessary to satisfy criticality regulatory requirements to utilize ATF with increased enrichment.

Notice of the NSSC No.2021-14 defines the term ‘Neutron Absorber’ as a material with a high neutron absorption cross section, which is used to prevent criticality during nuclear fission reactions and includes neutron absorbers as target items for manufacture inspection. U.S.NRC report of the NUREG-2214 states that the subcriticality of spent nuclear fuel (SNF) in Dry Storage Systems (DSSs) may be maintained, in part, by the placement of neutron absorbers, or poison plates, around the fuel assemblies. This report mentions the need for Time-Limited Aging Analysis (TLAA) on depletion of Boron (10B) in neutron absorbers for HI-STORM 100 and HISTAR 100. Also, this report mentions that 10B depletion occurs during neutron irradiation of neutron absorbers, but only 0.02% of the available 10B is to be depleted through conservative assumptions regarding the neutron flux or accumulated fluence during irradiation, which supports the continued use of the neutron absorbers in the SNF dry storage cask even after 60 years of evaluated period. There are several types of commercially available neutron absorbers, broadly classified into Boron Carbide Cermets (e.g., Boral®), Metal Matrix Composites (MMC) (e.g., METAMIC), Borated Stainless Steel (BSS), and Borated Al alloy. While irradiation tests for neutron absorbers are primarily conducted during wet storage systems, there are also some prior studies available on irradiation tests for neutron absorbers during dry storage systems. For examples, there is an analysis of previous research on high-temperature irradiation test of metallic materials and identification of limitations in existing methodologies were conducted. Furthermore, an improvement plan for simulating the high-temperature irradiation damage of neutron absorbers was developed. In report published by corrosion society summarizes the evaluation results of the degradation mechanisms for Stainless Steel- and Al-based neutron absorbers used in SNF dry storage systems.

International Atomic Energy Agency defines the term “Poison” as a substance used to reduce reactivity, by virtue of its high neutron absorption cross-section, in IAEA glossary. Poison material is generally used in the reactor core, but it is also used in dry storage systems to maintain the subcriticality of spent fuel. Most neutron poison materials for dry storage systems are boron-based materials such as Al-B Carbide Cermet (e.g., Boral®), Al-B Carbide MMC (e.g., METAMIC), Borated Stainless Steel, Borated Al alloy. These materials help maintain subcriticality as a part of the basket. U.S.NRC report NUREG-2214 provides a general assessment of aging mechanisms that may impair the ability of SSCs of dry storage systems to perform their safety functions during longterm storage periods. Boron depletion is an aging mechanism of neutron poison evaluated in that report. Although that report concludes that boron depletion is not considered to be a credible aging mechanism, the report says analysis of boron depletion is needed in original design bases for providing long-term safety of DSS. Therefore, this study aimed to simulate the composition change of neutron poison material in the KORAD-21 system during cooling time considering spent fuel that can be stored. The neutron source term of spent fuel was calculated by ORIGEN-ARP. Using that source term, neutron transport calculation for counting neutrons that reach neutron poison material was carried out by MCNP®-6.2. Then, the composition change of neutron poison material by neutron-induced reaction was simulated by FISPACT-II. The boron-10 concentration change of neutron poison material was analyzed at the end. This study is expected to be the preliminary study for the aging analysis of neutron poison material about boron depletion.

In nuclear fuel development research, consideration of the back-end cycle is essential. In particular, a review of an in-reactor performance of nuclear fuel related to the various degradation phenomena that can occur during spent fuel dry storage is an important area. The important factors affecting the degradation of zirconium-based cladding during dry storage are the cladding’s hydrogen concentration and rod internal pressure after irradiation. In this study, a preliminary analysis of the in-reactor behavior of the HANA cladding, which has been developed and is currently undergoing licensing review, was performed, and based on this result, a comparative analysis between nuclear fuel with HANA cladding and current commercial fuel under storage conditions was performed. The results show that the rod internal pressure of nuclear fuel with HANA cladding is not significantly different from that of commercial cladding, and the hydrogen concentration in the cladding tends to reduce due to the increased corrosion resistance, so fuel integrity in a dry storage conditions is not expected to be a major problem. Although the lack of cladding creep data under dry storage conditions, the results from the Halden research reactor test comparing in-reactor creep behavior with Zircaloy-4 showed that there is sufficient margin for degradation due to creep during storage.

Due to the saturation of spent fuel pool of nuclear power plant in Korea, temporary storage for spent fuel will be installed, and spent fuel will be stored and managed in dry cask for a considerable period of time. Since spent nuclear fuel must withstand continuous decay heat, radiation and high internal pressure of the fuel rod in the cask, behavior of spent nuclear fuel is needed to be reviewed. Spent nuclear fuel used in Pressurized Water Reactor (PWR) in Korea is stored in a wet storage currently, but it is going to store a temporary dry-storage facility on Kori site. Therefore, it is very important and meaningful to evaluate the behavior of nuclear fuel with realistic modeling. Also, domestic PWR nuclear fuel has various burn-up. In the past, the burn-up of nuclear fuel in light water reactors was low, but in order to increase power generation efficiency, the concentration of uranium was increased and the number of new fuel was increased. Therefore, a large amount of nuclear fuel with burn-up of 45,000 MWD/MTU or higher, generally called high burn-up, is also stored in the spent fuel pool (SFP). Therefore, it is necessary to evaluate by dividing three different burn-up such as, low, medium, and high burn-up. Thus, this study will review the behavior of nuclear fuel at different burn-up during the temporary storage period with FALCON (EPRI), computational code and analyze the factors affecting the integrity of nuclear fuel, including when the temporary storage is extended its additional lifetime. And this evaluation will contribute developing the spent fuel management plan in Korea.

On a global scale, the storage of spent nuclear fuel (SNF) within nuclear power plants (NPP) has become an important research topic due to limited space caused by approaching capacity saturation. SNF have e been collected over decades of NPP operation, coming up to capacity limitation. In case of Korea, every reactor except Saeul 1 and 2 has reached a SNF storage saturation rate of over 75%. One of the most studied methods for enhancing storage capacity efficiency involves increasing storage density using racks with neutron absorbers. Neutron absorbers like borated stainless steel (BSS) are utilized to manage the reactivity of densely stored SNF. However, major challenges of applying BSS are manufacturing hardness from heterogenous microstructure and mechanical property degradation from helium bubble formation. This study suggests that innovative fabrication methods of 3D printing can be good candidate for easier fabrication and better structural integrity of BSS. Directed energy deposition (DED), one of the 3D printing methods have become major candidate method for various alloys. It deposits alloy powder on base melt surface by high intensity laser, similar with welding process. Powder manufacturing is already demonstrated superior performance compared to casting in ASTM-A887, such as increased mechanical properties, owing to its well distributed chemistry of alloy. Moreover, as its original microstructural property, the formation of micro-pores through DED could lead to long-term performance improvements by capturing helium generated from the neutron absorption of boron. The potential for fabricating complex structure is also among the advantages of DED-produced neutron absorbers. Expected challenge on DED application on BSS is lack of printing condition data, because the 3D printing process have to be kept very careful variables of thermal intensity, powder flux and etc. These processes may get through much of trial & error for initial condition approaching. Nonetheless, as a recommendation of improved neutron absorber for efficient SNF pool storage, the concept of 3D printed BSS stands out as an intriguing avenue for research.

Since the September 11 terrorist attacks in the United States, concerns about intentional aircraft crashes into nationally critical facilities have soared in countries around the world. The United States government advised nuclear utilities to strengthen the security of nuclear power plants against aircraft crashes and stipulated aircraft crash assessment for new nuclear facilities. Interest in military missile attacks on nuclear facilities has grown after Russia attacked Ukraine’s Zaporizhzhia nuclear power plant, where spent nuclear power dry storage facility is operated. Spent nuclear fuel dry storage facilities in nuclear power plant sites should also strengthen security in preparation for such aircraft crashes. Most, but not all, spent nuclear fuel dry storage facilities in Europe, Japan and Canada are operated within buildings, while the United States and Korea operate dry storage facilities outdoors. Since all of Korea’s dry storage systems are concrete structures vulnerable to crash loads and are exposed to the outside, it is more necessary to prepare for aircraft crash terrorist attacks due to the Korea’s military situation. Residents near nuclear power plants are also demanding assessment and protective measures against such aircraft crashes. However, nuclear power plants, including spent nuclear fuel dry storage facilities, are strong structures and have very high security, so they are unlikely to be selected as targets of terrorism, and spent nuclear fuel dry storage systems are so small that aircraft cannot hit them accurately. Collected opinions on the assessment of aircraft crash accidents at spent nuclear fuel dry storage facilities in nuclear power plant sites were reviewed. In addition, the current laws and regulatory requirements related to strengthening the security of new and existing nuclear power plants against intentional aircraft crashes are summarized. Such strengthening of security can not only ensure the safety of on-site spent nuclear fuel dry storage facilities, but also contribute to the continuous operation of nuclear power plants by increasing resident acceptance.

Regulatory agencies require burn-up verification to ensure that dry storage casks using burn-up credit are not loaded with fuel with a reactivity greater than the allowable standard. Accordingly, in preparation for dry storage of SF, the reliability of the burnup was verified and action plans for fuel with confirmed errors were reviewed. Reliability verification was performed by comparing the actual burnup calculated with combustion calculation code (TOTE, ISOTIN) used in NPP and the design burnup calculated with the nuclear design code (ANC). As a result of comparing the differences between actual burnup and design burnup for 7,414 assemblies of SF generated from CE-type NPPs, the average deviation was confirmed to be 0.79% and 220 MWD/MTU. In the CE-type NPPs, no fuel showing large deviations was identified, and it was confirmed that reliability was secured. As a result of comparing the differences in 11,082 assemblies of SF generated from WH-type NPPs, the differences were not large, averaging 1.16% or 422 MWD/MTU. However, fuels showing significant differences were identified, and cause analysis was performed for those fuels. The cause analysis used a method of comparing the burnup of symmetrically loaded fuels in the reactor. For fuels that were not symmetrically loaded, a method was used to compare them with fuels with similar combustion histories. As a result of the review, it was confirmed that the fuel was under- or over-burned compared to symmetrically loaded fuel. For fuels for which clear errors have been identified, we are considering replacing them with the design burnup, and for fuels whose causes cannot be confirmed, we are considering ways to maintain the actual burnup.

In Korea, most temporary storage facilities for spent nuclear fuel are nearing saturation. As an alternative to this, the 2nd basic plan for high-level radioactive waste management specified the operation plan of dry interim storage facility. Meanwhile, the NSSC No. 2021-19 stipulates that it is necessary to evaluate the possibility and potential effect of accident before operating interim storage facility. Therefore, this study analyzed the categories of accident scenarios that may occur in dry storage facility as part of prior research on this. We investigated the case of categorization of dry storage facility accident scenarios of IAEA, NRC, KAREI, and KINS. The IAEA presented accident scenarios that could occur in on-site dry storage facility operated with silo and cask method. NRC has classified accident scenarios in dry storage facility and estimated the probability of accidents for each. KAERI and KINS selected major accident scenarios and analyzed the processes for each, in preparation for the introduction of dry storage facility in Korea in the future. Overall, a total of 10 accident scenarios were considered, and the scenarios considered by each institution were different. Among 10 scenarios, cask drop and aircraft collision were included in the categorization of most institutions. The results of this study can be used as basic data for cataloging accidents subject to safety evaluation when introducing dry interim storage facility in Korea in the future.

South It is necessary to develop the future technologies to improve the sustainability and acceptability of nuclear power plants generation. Currently, our company is preparing to build the dry storage facility on-site in accordance with the basic plan for managing high-level radioactive waste announced by the government in 2021. However, studies on technologies for the volume reduction of spent nuclear fuel to increase the efficiency of on-site spent fuel dry storage facilities are very not enough. Accordingly, in this study, the storage efficiency and appropriateness for the SF volume reduction processing technologies such as SF oxide processing technology and consolidation technology are evaluated. Finally, the goal is to develop the optimized technologies to improve the storage efficiency of spent nuclear fuel. As a result in this study is followings. [Safety] After removing volatile fission products (Xe, Kr, I, etc.), Xe, Kr, etc. are removed during storage of the sintered structures. UO2 has a high melting point of approximately 1,000°C after cesium (Cs) has been removed, and heat can be removed by natural convection. [Economy]1999 DUPIC unit facility unit price reference, 2020 standard 328 $/kg estimated. A Comprehensive Approach Considering the Whole System is needed. Benefit from replacement and continuous operation of metal storage containers. Changes in economic efficiency obtained in conjunction with fluctuations in electricity prices and disposal. [Waste filter] A separated solidification facility high-level waste filter is required, and overseas outsourcing must be considered. [Waste cladding]. Cannot be accommodated in low-level disposal site. This reason is why the Ni nuclides occur to be in bulk. [Metal structural material] It is possible to reduce the initial volume by 7.6% or more when compressed or melted, but the technology needs to be advanced. [Oxide blocks] Larger size and density are expected to improve storage and disposal efficiency. [Facilities operation waste] Expected to be able to be disposed of at mid-to-low level decommissioning sites in Gyeongju city. [Solidified volatile nuclides and activated metals] Expected to improve storage efficiency when used volume is reduced and stored, such as outsourced reprocessing. [Oxide block] Radioactivity and decay heat are estimated to be reduced by half during oxide treatment. 75% reduction in volume and 40% reduction in storage area compared to used nuclear fuel before treatment. [Merits/Shortages] Improvement of storage and disposal efficiency empirical research such as large-capacity [real-scale] oxide block production is required. Oxide processing facilities are likely to be classified as post-use nuclear fuel processing facilities. It is determined that additional documents such as a Radiation Environmental Report (RER) must be submitted. Existence of possible external leaks of glass, highly mobile radionuclides from the point of view of nuclear criticality and heat removal. Acceptancy requirements of citizens in the process of creating additional sites for oxide treatment facilities. Considering social public opinion, it is necessary to secure the acceptability such as residents’ opinions convergence. Characteristics of high nuclear non-propagation compared to other processing technologies involving chemical processing. Also, Expectation of volume reduction effect for spent nuclear fuel itself. Volume reduction methods for solid waste and gaseous waste are required.

In KNF, fuel performance analysis modules were developed to predict the overall behavior of a fuel rod under normal operating conditions. Their main focus is to provide information on initial conditions prior to dry storage. Potential degradation mechanisms that may affect sheath integrity of spent CANDU fuel during dry storage are: creep rupture under internal gas pressure, sheath oxidation in air environment, stress corrosion cracking, delayed hydride cracking, and sheath splitting due to UO2 oxidation for a defective fuel. To upgrade the developed modules that address all the damage mechanisms, the first step was a review of the available technical information on phenomena relevant to fuel integrity. The second step was an examination of the technical bases of all modules, identify and extend the ranges of all modules to required operating ranges. The 300°C spent CANDU fuel sheath temperature metric for dry storage ensures spent CANDU fuel element integrity from the failure mechanisms of creep rupture, oxidation and stress corrosion cracking at a failure probability of 2×10-5 for a dry storage time of 100 years. The 300°C sheath temperature metric for dry storage has relatively a lower failure rate than the target criteria for dry storage of spent LWR fuel. Although different modes of failure were treated separately for simplicity, ignoring possible synergistic effects, these results are conservative because of the conservative assumptions that have been made for evaluating spent fuel element conditions, and because of the inherent conservatism of the applied models. Additional conservatism of the model comes from the fact that isothermal conditions do not prevail in actual storage conditions. Further R&D being considered includes acquisition of new functional models to implement overall fuel behavior evaluation and cover spent CANDU fuel in dry storage, and upgrades of the analysis module to achieve sufficient accuracy in key output parameters. The developed modules provide a platform for research and industrial applications, including the design of fuel behavior experiments and prediction of safe operating margins for spent CANDU fuel.