This technology is based on the processing skills by the automatic high speed burner processors to improve the overall productivity and customer satisfactions. The following conclusions could be gained from this research. A burner for processing stone plate was measured to obtain the average 23.8 m/s. Non-slip friction coefficient of the burner after processing was measured to obtain a mean value of 53.2 BPN. Production rate for stone items was measured by the time of the burner and the result passed through the brush was 26.94 m/s on average.

Abstract
 1. 서론
 2. 개발내용 및 방법
  2.1 개발 내용
  2.2 석재 가공 절차
  2.3 가열 이송부 설계
  2.4. 헤드부 및 가열부 설계
  2.5 브러쉬부 설계
  2.6 개발된 석재용 자동 고속버너 가공기의 3차원 조립도
 3. 결과
  3.1 이송 속도 측정
  3.2 논슬립 마찰계수 측정
  3.3 생산속도 측정
 4. 결론
 후기
 References

• 김영진((주)정도산업) | Y. J. Kim
• 김범곤((주)정도산업) | B. G. Kim
• 원대희(원광대학교 산학협력단) | D. H. Won Corresponding Author