CFRP has the high strength and low weight. But it tends to be frail if it is applied with the mechanical bonding method using weld, rivet or bolt. So, the chemical bonding method using the special adhesive has been utilized. By applying the bonding method with the adhesive, this paper investigates the mechanical property of DCB specimen bonded with the type of mode 2 through the simulation analysis. Four kinds of specimen thicknesses are 25mm, 35mm, 45mm and 55mm in this study. The mechanical behaviors of specimens due to the forced displacements are investigated as the distributions of equivalent stresses. The reaction force becomes higher as the specimen thickness is increased. The result of this study about the fracture property of adhesive joint is thought to be contributed to the safe design of structure with CFRP.

Abstract
 1. 서론
 2. 해석방법
 3. 해석결과
 4. 결론
 References

• 황규완(Mechanical Engineering Dept. Graduate School, Kongju National University) | Gue-Wan Hwan
• 조재웅(Division of Mechanical & Automotive Engineering, Kongju National University) | Jae-Ung Cho Corresponding Author