PURPOSES : The recent increase in the application of reclaimed asphalt pavement (RAP) calls for more research focusing the evaluation of pavement performance. For this matter, this study aims at evaluating pavement performance using the application rate of RAP.
METHODS: To obtain mixtures with RAP aggregate application rates of 10%, 25% and 30%, the gyratory compaction method was applied regarding the mix design process for determining the optimum asphalt content (OAC). Additionally, the in-direct tension (IDT) test, deformation strength test (DST), tensile strength ratio (TSR) test and dynamic modulus (DM) test were conducted to verify the effect of RAP application rate on pavement performance. Based on the above-mentioned results, performance evaluation was done to these RAP application of design or utilization to construction site. The performance evaluation analysis was performed using the Korean Pavement Research Program (KPRP) of second level for the pavement design.
RESULTS: From the DST results, the rutting resistance was improved as the application rates of RAP were increased. Additionally, all the IDT and toughness results satisfied the quality standards of the asphalt concrete pavement. However, the results did not conform with the tensile strength ratio standards with the application rates of RAP of 25% and 30%. This means that the standards, which should be considered when the addictive regeneration material is applied to the mixture when the RAP application rate is over 25%, were reflected.
CONCLUSIONS : The predicted performance decreased from the second level performance analysis with the increase in the RAP application rates. All the cases satisfied the design standards (fatigue cracking, rutting depth and international roughness index (IRI)). However, the results of them closed to these standards (up to 94% (Fatigue)).