논문 상세보기

전산유체해석을 이용한 전통한옥 주변의 미기후 특성에 대한 연구 KCI 등재

A Study on the Characteristic Micro-Climate of Traditional Korean Houses using Computational Fluid Analysis

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/418263
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국공간구조학회지 (JOURNAL OF THE KOREAN ASSOCIATION FOR AND SPATIAL STRUCTURES)
한국공간구조학회 (Korean Association for Spatial Structures)
초록

Micro-climate measurements and computational fluid analysis were conducted to use it as basic data for the preservation and management of the old house of Kim Myung-kwan, a traditional building that is National Folk Cultural Property No. 26. As a result of the actual measurement, the temperature and humidity are relatively evenly distributed indoors unlike outdoors, but the temperature and humidity vary depending on the time change and the installation location in the outdoors. It was found that the temperature increases after dawn and the temperature varies depending on the installation position around 14:00–15:00, when the temperature becomes the highest. In particular, the temperature was high at the outdoor measurement point adjacent to the building and the fence. As a result of the computational fluid analysis, the temperature was high in the buildings and fences in the old house or in the area adjacent to the building, and it was about 1℃ higher than the surrounding area. In this area, it is judged that the thickening of wood will occur more severely than in other locations, and special preservation management is required.

목차
Abstract
1. 서론
2. 전산유체해석
    2.1 해석대상
    2.2 기상데이터 분석
    2.3 실측데이터 분석
    2.4 해석개요
3. 해석결과
4. 결론
감사의 글
References
저자
  • 박민우(전북대학교 건축공학과, 박사수료) | Park Min-Woo (Department of Architect Engineering, Jeonbuk National University)
  • 유장열(송원대학교 건축공학과 교수, 공학박사) | You Jang-Youl (Department of Architect Engineering, Song Won University)
  • 남병희(전북대학교 건축공학과, 박사수료) | Nam Byung-Hee (Department of Architect Engineering, Jeonbuk National University)
  • 유기표(전북대학교 건축공학과 교수, 공학 박사, 장경간철골구조농촌시설물연구센터) | You Ki-Pyo (Department of Architect Engineering, Jeonbuk National University, Long-span Steel Frame System Research Center) Corresponding author