논문 상세보기
A Study on Solvent Selection for Ligand Liquefaction in Decontamination Process Using Supercritical Carbon Dioxide
p.309
As the number of nuclear power plants whose design life has expired worldwide increases, the attempts are continuing to complete the project of nuclear back-end cycle, the last task of the nuclear industry. Decontamination is essential in the process of dismantling nuclear facilities and restoration sites to remove all or some of the regulatory controls from an authorized facility. Among radioactive wastes, particularly contaminated soil is characterized by difficult physical decontamination because radionuclides are adsorbed between soil particles, that is, pores. Therefore, chemical decontamination is mainly used, which has the disadvantage of generating a lot of secondary waste. In order to overcome these disadvantages, an eco-friendly soil decontamination process is being developed that can drastically reduce the amount of secondary waste generated by using supercritical carbon dioxide. Supercritical carbon dioxide can easily control its physical properties and has both liquid and gas properties. However, since supercritical carbon dioxide is non-polar, additives are needed to extract polar metal ions, which are the goal of decontamination. Therefore, ligand with both CO2-philic and metal binding regions was selected. In previous studies, the decontamination efficiency of soil was evaluated by reacting contaminated soil with solid ligand and co-ligand at once. When solid ligands were used, the decontamination efficiency was lower than expected, which was expected because chemical substances were somewhat difficult to exchange in the closed process. In this study, in order to increase the efficiency of the decontamination process, the need for a process of liquefying ligand and continuously flowing it has been raised. Therefore, a co-solvent that dissolves well at the same time in SCCO2, ligand, and co-ligand was selected. In the selection process, a total of eight substances were selected by dividing into six polar substances and two non-polar substances through various criteria such as economic feasibility, eco-friendliness, and harmlessness. Thereafter, ethanol was finally selected through solubility evaluation for SCCO2 and additives. It is expected that a more effective decontamination process can be constructed when the additive is liquefied using a solvent selected from the results of this study.
