논문 상세보기
Drying Tests According to Pump Capacity and Canister Volume
- 언어ENG
- URLhttps://db.koreascholar.com/Article/Detail/431092
p.146
When storing spent fuel in a dry condition, it becomes essential to ensure that any remaining moisture bound to the canister and spent fuel is effectively removed and stored within an inert gas environment. This is crucial for preserving the integrity of the spent fuel. According to the NRC- 02-07-C-006 report, it is advised to reduce pressure gradually or in incremental stages to prevent the formation of ice. In the context of vacuum drying, it is desirable to perform testing using a prototype model; however, utilizing a prototype model can be difficult due to budget constraints. To address this limitation, we designed and constructed a laboratory-scale vacuum drying apparatus. Our aim was to assess the impact of vacuum pump capacity on the drying process, as well as to evaluate the influence of canister volume on drying efficiency. The vacuum drying tests were carried out until the surface temperature of the water inside reached 0.1°C. In the tests focusing on vacuum pump capacity, vacuum pumps with capacities of 100, 200, 400, and 600 liters were employed. The outcomes of these tests indicated that smaller vacuum pump capacities resulted in increased evaporation rates but also prolonged drying times. In the case of drying tests based on canister volume, canisters with volumes of approximately 100 and 200 liters were utilized. The results revealed that larger canister volumes led to longer drying times and lower rates of evaporation. Consequently, if we were to employ an actual dry storage cask for vacuum drying the interior of the canister, it is anticipated that the process would require a substantial amount of time due to the considerably larger volume involved.
