논문 상세보기

Blast Furnace Slag 미분말을 혼입한 순환골재고강도콘크리트의 역학적 특성에 관한 연구 KCI 등재

Mechanical Properties of Recycled Aggregate High-Strength Concrete Incorporating Blast Furnace Slag Fine Powder

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/443725
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
복합신소재구조학회 논문집 (Journal of the Korean Society for Advanced Composite Structures)
한국복합신소재구조학회 (Korean Society for Advanced Composite Structures)
초록

건설 자재와 건설 폐기물의 환경적 영향에 대한 사회적 관심이 높아지고 있다. 고강도 콘크리트의 필요성이 점차 커짐에 따라, 본 연구에서는 서로 연관된 환경 문제에 대한 두 가지 잠재적 해결책을 검토하였다. 첫째는 재활용 콘크리트 골재의 사용량 증가 가능성이고, 둘째는 고로 슬래그를 시멘트로 활용(재활용)할 가능성이다. 일반적으로 재활용 골재를 사용하면 고강도 콘크리트의 강도 가 저하되는 것으로 알려져 왔다. 따라서, 본 연구에서는 재활용 골재 콘크리트의 배합비와 함량 변화를 분석하여 고층 건축에 재활용 골재가 실용적인지, 그리고 어떤 방식으로 활용되는지를 규명하고자 하였다.

With the increasing construction of high-aspect-ratio structures in the 21st century, demand for high-strength concrete has grown substantially. At the same time, public concern over the environmental impact of construction materials and waste is intensifying. This study addresses these concerns by exploring two approaches: expanding the use of recycled concrete aggregates and utilizing blast furnace slag as a cementitious material. Recycled aggregates are generally believed to reduce the strength of high-strength concrete; therefore, this work evaluates their feasibility in high-rise applications by varying mix proportions and ratios. Furthermore, the potential of blast furnace slag to partially replace cement is examined for its practicality and long-term benefits. The objective is to determine the effectiveness of low-cost, sustainable materials in producing concrete that satisfies all performance requirements for high-rise construction while reducing the environmental footprint of concrete production.

목차
ABSTRACT
1. 서 론
2. 실험
    2.1 사용재료
    2.2 변수 및 배합설계
    2.3 실험방법
3. 실험결과
    3.1 슬럼프 플로우 실험
    3.2 압축강도 실험
    3.3 쪼갬인장강도 실험
4. 결 론
ACKNOWLEDGMENT
REFERENCES
국문초록
저자
  • 김승기(국립금오공과대학교 건설기술연구소 박사후연구원) | Kim Seung-Ki (Postdoc., The Research Institute of Building and Construction Technology, Kumoh National Institute of Technology, Gumi, Korea)
  • 조향기(국립금오공과대학교 건축공학과 석사과정) | Jo Hyang-Gi (M.S. Student, Department of Architectural Engineering, Kumoh National Institute of Technology, Gumi, Korea)
  • 윤현서(국립금오공과대학교 건축토목환경공학부 학사과정) | Yoon Hyeon-Seo (B.S. Student, Department of Architectural Engineering, Kumoh National Institute of Technology, Gumi, Korea)
  • 김우석(국립금오공과대학교 건축토목환경공학부 교수) | Kim Woo-Suk (Professor, Department of Architectural Engineering, Kumoh National Institute of Technology, Gumi, Korea) Corresponding author