This article reported a simple method for preparing diamond/SiC composites by polymer impregnation and pyrolysis (PIP) process, and the advantages of this method were discussed. Only diamond and SiC were contained in the diamond/SiC composite prepared by PIP process, and the diamond particles remained thermally stable up until the pyrolysis temperature was increased to 1600 °C. The pyrolysis temperature has a significant impact on the thermal conductivity and dielectric properties of composites. The thermal conductivity of the composite reaches a maximum value of 63.9 W/mK when the pyrolysis temperature is 1600 °C, and the minimum values of the real and imaginary part of the complex permittivity are 19.5 and 0.77, respectively. The PIP process is a quick and easy method to prepare diamond/SiC composites without needing expensive equipment, and it is of importance for promoting its application in the field of electric packaging substrate.

Core–shell ZIFs wrapped CuO hybrid materials (CuO@ZIF-67(Co)) were designed, synthesized, characterized, and employed as peroxymonosulfate (PMS) activators to degrade methylene blue (MB). It demonstrated outstanding catalytic activity on account of the unique structure and the synergistic effect between CuO cores and ZIF-67(Co) shells, resulting in complete degradation of MB (10 mg/L) in 1 min. Reactive oxygen species (ROSs) research showed that both SO4 − and OH were responsible for the removal of MB. The synergistic activation mechanisms in the CuO@ZIF-67(Co)/PMS system were investigated, which mainly involved the effective electron transfer of CuO and ZIF-67(Co) for accelerating the cycle of CuII/ CuI and CoIII/ CoII. This study broadens the application of MOF-derived materials for wastewater treatment.

Combination of liquid-phase exfoliation and hydrothermal method has progressed in recent years mainly on production of 2D materials. In this study, graphene was successfully synthesized via combinatorial of liquid-phase exfoliation and hydrothermal method with the aid of various conductive surfactants perylene-3, 4, 9, 10-tetracarboxylate (PTCA), lithium perylene-3, 4, 9, 10-tetracarboxylate (LiPTCA) and sodium perylene-3, 4, 9, 10-tetracarboxylate (NaPTCA). The effect of the lithium ( Li+) and sodium ( Na+) cations toward the efficiency of the graphene exfoliation process and its electrical properties was thoroughly investigated. Based on the characterization techniques, it is revealed that NaPTCA is the ideal conductive surfactant to exfoliate graphene sheets. X-ray diffraction spectra verified that the Na+ cation certainly can enhance the exfoliation process by expanding the interlayer spacing. The lateral size of the graphene sheets with Na-PTCA surfactant was the smallest (4.17 μm) as observed from SEM micrograph. The maximum concentration of the graphene yield was achieved up to 0.151 mgmL− 1 in NaPTCA surfactant alongside with excellent electrical conductivity of 746.27 Sm− 1 and relevant specific capacitance of 129 Fg− 1.

Carbon dots (CDs) were synthesized from phloroglucinol (PG) by simple heat treatment at 220–230 °C in the atmosphere without catalysts and solvents. PG-CDs heated at 220–230 °C could be completely dissolved in environmentally friendly water and exhibited a photoluminescence (PL) peak at 485 nm with 85 nm of the full width at half maximum (FWHM). The water-soluble polymer-dot-like PG-CDs were estimated to be 1.6–3.2 nm in size, and exhibited a wide range of PL wavelength at 370–630 nm. Since the PG-CDs are water-soluble materials, PG-CDs could be homogeneously mixed with a polymer such as polyvinylpyrrolidone (PVP) in water as a solvent, and PG-CDs/PVP films were prepared. The films exhibited PL characteristics that convert ultraviolet light at 350 nm to visible light above 400 nm. Thus, using PG as the raw material which has widely been produced industrially, the water-soluble fluorescent PG-CDs/PVP films could be prepared at a low cost by environmentally friendly methods.

For practical applications of graphene sheets in a variety of fields, mass production of high-quality graphene sheets is necessary. Herein, we reported a cost-effective, green, and simple approach to synthesizing mass production exfoliated graphene (EG) flakes employing electrochemical exfoliation of pencil graphite in neutral aqueous electrolytes. Pencil graphite cores of different grades were applied as anode and cathode electrodes and exposed to the electrolyte solution at a different voltage. Several parameters were examined and optimized, including pencil grade (2,4,6,8 B), applied voltage (10, 15, 20, 30 V), different inorganic electrolytes ((NH4)2SO4, Na2SO4, NaNO3, NaCl, and CH3COONa), and the concentration of electrolytes. The optimal condition was chosen by considering the mass of produced graphene and the conductivity of the graphene solution. The optimal conditions were as follow: pencil grade: 6B; applied voltage: 10 V; electrolyte type: Na2SO4; electrolyte concentration: 0.1 M. Under these conditions, the production yield was > 95% within 3 h and 9 min. The EG was characterized by utilizing FT-IR, XRD, Raman spectroscopy, FE-SEM, Cyclic Voltammetry, and Electrochemical Impedance Spectroscopy (EIS). Characterization indicates that the synthesized EG had an XRD peak at 2θ = 26.6° and an ID/ IG ratio of 0.36. Furthermore, the EG showed good conductivity when tested by cyclic voltammetry and EIS whereas the R2 values were 985.8 and 76.3 Ω for bare GCE and EG/GCE, respectively. In addition, EG effectively removed cadmium (Cd(II)) with an adsorption level of 8.72 mg/g. The results from this study suggest that EG can be scaled up and commercialized in an environmentally friendly and low-cost manner, especially in low-income countries, and using it to rectify metal ions.

Recently, hollow carbon spheres (HCS) have aroused great interests in the field of energy storage and conversion owing to their unique morphology, structure and other charming properties. Nevertheless, unsatisfactory electrical conductivity and relatively poor volumetric energy density caused by inevitable gaps between discrete carbon spheres greatly impede the practical application of HCS. In this work, for the first time we propose a novel dual-template strategy and successfully fabricate interconnected 3D hollow N-doped carbon network (HNCN) by a facile and scalable pyrolysis process. By systematical characterization and analysis, it can be found that HNCN is assembled by HCS and lots of mesoporous carbon. Compared to the counterparts, the obtained HNCN exhibits unique 3D interconnected architecture, larger specific surface area, hierarchical meso/macropore structure, higher structure defects, higher N doping amount and more optimized N configurations (especially for pyridinic-N and graphitic-N). As a result, these advantageous features endow HNCN with remarkably promoted electrochemical performance for supercapacitor and oxygen reduction reaction. Clearly, our proposed dual-template strategy provides a good guidance on overcoming the intrinsic shortcomings of HCS, which undoubtedly broadens their application in energy storage and conversion.

This study evaluated how acid treatment affects the ability of customized beads of activated carbon (BAC) to remove formaldehyde from air. Two different acids (hydrofluoric acid and sulfuric acid) were used to modify the surface of BAC prepared from a polymer material. The acid-modified BACs were further subjected to heat treatment. Physical and chemical characteristics of modified and unmodified BACs were investigated using nitrogen adsorption, Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray fluorescence, and X-ray photoelectron spectroscopy. Formaldehyde removal was evaluated under both dry and moist conditions. From the results, acid treatment clearly improved the adsorption performance, especially under the moist condition. Qualitative and quantitative surface analyses were conducted, mainly to examine the amount of O-bonds after acid treatment and the formation of S–O or Cl–O on BAC.