High-temperature friction performances of graphite blocks (GBs) and zinc phosphate impregnated graphite blocks (IGBs) were evaluated under various friction temperatures. The surface of IGB exhibited extremely lower average friction coefficient values, that was 0.007 at 400 °C and 0.008 at 450 °C, in comparison to that of GB (0.13 at 400 °C and 0.16 at 450 °C, respectively). The worn surface of IGB in the high-temperature friction test was smoother and more complete than that of GB. The wear under high temperature and load caused the transformation of zinc pyrophosphate to zinc metaphosphate and the formation of a continuous large-area boundary lubrication layer combined with graphite and metallic element on the wear surface. The superior tribology property of IGB could be attributed to the digestion of iron oxides by tribo-chemical reactions and passivation of the exposed dangling covalent bonds. Specifically, the layered structure generated on the IGB wear interface effectively decreased the adhesive forces and prevented the surface from serious damage.

CNTs/Al-Li composite was first prepared by hot-pressed sintering from Al-Li alloy powder and CNTs solution, and then the hot compression tests were performed on MMS-100 thermal simulator at strain rate range of 0.01– 10 s− 1, deformation temperature range of 350–500 °C, and total deformation amount of 60%. True stress–strain curves were plotted, and constitutive equation as well as hot processing maps were successfully confirmed based on Arrhenius constitutive model and Prasad instability criterion. Results show that CNTs/Al-Li composite have a very poor hot deformation ability and narrow processing region, which is strain rate range of 0.1–1 s− 1 and deformation temperature range of 360–400 °C. Hot extrusion experiment was carried out and the processing parameters were selected according to the established hot processing map, and an improvement on strength and a good balance between strength and plasticity can be obtained, which is about 650 MPa for tensile strength and 9% for elongation.

The utilization of carbonaceous reinforcement-based polymer matrix composites in structural applications has become a hot topic in composite research. Although conventional carbon fiber-reinforced polymer composites (CFRPs) have revolutionized the composite industry by offering unparalleled features, they are often plagued with a weak interface and lack of toughness. However, the promising aspects of carbon fiber-based fiber hybrid composites and hierarchical composites can compensate for these setbacks. This review provides a meticulous landscape and recent progress of polymer matrixbased different carbonaceous (carbon fiber, carbon nanotube, graphene, and nanodiamond) fillers reinforced composites’ mechanical properties. First, the mechanical performance of neat CFRP was exhaustively analyzed, attributing parameters were listed down, and CFRPs’ mechanical performance barriers were clearly outlined. Here, short carbon fiber-reinforced thermoplastic composite was distinguished as a prospective material. Second, the strategic advantages of fiber hybrid composites over conventional CFRP were elucidated. Third, the mechanical performance of hierarchical composites based on carbon nanotube (1D), graphene (2D) and nanodiamond (0D) was expounded and evaluated against neat CFRP. Fourth, the review comprehensively discussed different fabrication methods, categorized them according to performance and suggested potential future directions. From here, the review sorted out three-dimensional printing (3DP) as the most futuristic fabrication method and thoroughly delivered its pros and cons in the context of the aforementioned carbonaceous materials. To conclude, the structural applications, current challenges and future prospects pertinent to these carbonaceous fillers reinforced composite materials were elaborated.

This study aims to design a new sizing system for hygienic masks to protect against COVID-19-related respiratory disorders. The product sizes were collected from 70 commercially available hygienic masks, and 18 head measurements were obtained from the three-dimensional (3D) scan data of 2,048 men and women aged 20 to 69 years from the 6th Size Korea Survey. The statistical analysis was performed using the IBM Statistical Package for the Social Sciences (SPSS) 28.0 program. The “bitragion-subnasale arc” and “menton-sellion length” were chosen as the key body dimensions for the hygienic mask sizing system. The linear regressions with 18 3D head measurements were analyzed, and it was determined that the key body dimensions were useful for statistically predicting other 3D head measurements related to hygienic masks. A new sizing system was proposed for two types of masks, “masks with a tight fit” and “masks with a loose fit,” taking into account the existing Korean Industrial Standards (KS) and the shortcomings of the sizes of hygienic masks on the market. The sizing system for tight-fitting masks consisted of the key body dimensions, with their sizes indicated by a pair of numbers. The sizing system for loose-fitting masks consisted solely of the bitragion-subnasale arc, with their sizes denoted by letters such as S, M, and L (denoting small, medium, and large, respectively). Future studies should consider this mask sizing system for different age groups, such as children and adolescents.

본 연구에서는 계면활성제 용액에서 1,3-Butanediol, 1,2-Pentanediol, 1,2 Hexanediol 들이 cmc, 표면장력, 기포력 및 유화력에 미치는 영향을 연구 하였다. 계면활성제 수용액에 diol의 첨가는 cmc와 표면장력 저하를 초래 하였으며 기포력 및 유화력은 향상 되었다. 이러한 경향은 diol의 사슬길 이가 길수록 현저 하였다. 이러한 특성은 diol의 알킬사슬과 계면활성제 분자간에 소수성 상호작용이 물 분자간의 응집력을 감소시키고, 계면에서 계면활성제 headgroup간 상호작용을 증진시키기 때문이다. 또 한 각 diol의 방부력을 평가하기 위하여 MIC 측정을 수행 하였으며 방부력은 1,2-HDO > 1,2-PDO > 1,3-BDO 순서였다. 본 연구의 결과들은 diol들이 화장품에서 보조 계면활성제와 방부제로 이용될 수 있음을 확인 시켜 주웠다.

In this work, we developed silver nanowires and a silicon based Schottky junction and demonstrated ultrafast broadband photosensing behavior. The current device had a response speed that was ultrafast, with a rising time of 36 μs and a falling time of 382 μs, and it had a high level of repeatability across a broad spectrum of wavelengths (λ = 365 to 940 nm). Furthermore, it exhibited excellent responsivity of 60 mA/W and a significant detectivity of 3.5 × 1012 Jones at a λ = 940 nm with an intensity of 0.2 mW cm2 under zero bias operating voltage, which reflects a boost of 50%, by using the AC PV effect. This excellent broadband performance was caused by the photon-induced alternative photocurrent effect, which changed the way the optoelectronics work. This innovative approach will open a second door to the potential design of a broadband ultrafast device for use in cutting-edge optoelectronics.

Background: Trunk movements are an important factor in activities of daily living; however, these movements can be impaired by stroke. It is difficult to quantify and measure the active range of motion (AROM) of the trunk in patients with stroke. Objects: To determine the reliability and validity of measurements using a digital goniometer (DG) and smart phone (SP) applications for trunk rotation and lateral flexion in stroke patients. Methods: This is an observational study, in which twenty participants were clinically diagnosed with stroke. Trunk rotation and lateral flexion AROM were assessed using the DG and SP applications (Compass and Clinometer). Intrarater reliability was determined using intraclass correlation coefficients (ICCs) with 95% confidence intervals. Pearson correlation coefficient was used to determine the validity of the DG and SP in AROM measurement. The level of agreement between the two instruments was shown by Bland–Altman plot and 95% limit of agreement (LoA) was calculated. Results: The intrarater reliability (rotation with DG: 0.96–0.98, SP: 0.98; lateral flexion with DG: 0.97–0.98, SP: 0.96) was excellent. A strong and significant correlation was found between DG and SP (rotation hemiplegic side: r = 0.95; non-hemiplegic side: r = 0.90; lateral flexion hemiplegic side: r = 0.88; non-hemiplegic side: r = 0.78). The level of agreement between the two instruments was rotation (hemiplegic side: 23.02° [LoA 17.41°, –5.61°]; non-hemiplegic side: 31.68° [LoA 23.87°, –7.81°]) and lateral flexion (hemiplegic side: 20.94° [LoA 17.48°, –3.46°]; non-hemiplegic side: 27.12° [LoA 18.44°, –8.68°]). Conclusion: Both DG and SP applications can be used as reliable methods for measuring trunk rotation and lateral flexion in patients with stroke. Although, considering the level of clinical agreement, DG and SP could not be used interchangeably for measurements.

Background: Pronated foot posture (PFP) contributes to excessive dynamic knee valgus (DKV). Although foot orthoses such as medial arch support (MAS) are widely and easily used in clinical practice and sports, few studies have investigated the effect of MAS on the improvement of DKV during stair descent in individuals with a PFP. Moreover, no studies reported the degree of improvement in DKV according to the severity of PFP when MAS was applied. Objects: This study aimed to examine the immediate effect of MAS on DKV during stair descent and determine the correlation between navicular drop distance and changes in DKV when MAS is applied. Methods: Twenty individuals with a PFP (15 males and five females) participated in this study. The navicular drop test was used to measure PFP severity. The frontal plane projection angle (FPPA) was calculated under two conditions, with and without MAS application, using 2-dimensional video analysis. Results: During stair descent, the FPPA with MAS (173.1° ± 4.7°) was significantly greater than that without MAS (164.8° ± 5.8°) (p < 0.05). There was also a significant correlation between the navicular drop distance and improvement in the FPPA when MAS was applied (r = 0.453, p = 0.045). Conclusion: MAS application can affect the decrease in DKV during stair descent. In addition, MAS application should be considered to improve the knee alignment for individuals with greater navicular drop distance.

Background: The craniocervical flexion test (CCFT) was developed for the activation and endurance of deep cervical flexors. However, the muscle thickness and muscle thickness changing ratio of the sternocleidomastoid (SCM) and deep cervical flexor (DCF) muscles in subjects with and without forward head posture (FHP) have not been reported. Objects: To determine the difference in thickness of the SCM and DCF muscles and the difference in the muscle thickness changing ratio between SCM, DCF, and DCF/SCM 20 mmHg and DCF/SCM 30 mmHg between subjects with and without FHP. Methods: Thirty subjects with and without FHP were enrolled. The muscle thickness of the SCM and DCF was measured when maintained at a baseline pressure of 20 mmHg and a maximum pressure of 30 mmHg using a pressure biofeedback unit during the CCFT. Ultrasonography was used to capture images of SCM and DCF muscle thickness during the CCFT, which was calculated using the picture archiving and communication system (PACS). Results: We observed a significant difference within the pressure main effect between SCM and DCF at a baseline pressure of 20 mmHg and a maximum pressure of 30 mmHg (p < 0.05). However, there was no significant difference in the muscle thickness and muscle thickness changing ratio for SCM and DCF during CCFT between subjects with and without FHP. Conclusion: There was no significant difference in the muscle thickness recruitment pattern during CCFT in posture changes between subjects with and without FHP.

We present the analysis of a planetary microlensing event OGLE-2019-BLG-0362 with a shortduration anomaly (∼0.4 days) near the peak of the light curve, which is caused by the resonant caustic. The event has a severe degeneracy with Δχ2 = 0.9 between the close and the wide binary lens models both with planet-host mass ratio q ≃ 0.007. We measure the angular Einstein radius but not the microlens parallax, and thus we perform a Bayesian analysis to estimate the physical parameters of the lens. We find that the OGLE-2019-BLG-0362L system is a super-Jovian-mass planet Mp = 3.26+0.83 −0.58 MJ orbiting an M dwarf Mh = 0.42+0.34 −0.23 M⊙ at a distance DL = 5.83+1.04 −1.55 kpc. The projected star-planet separation is a⊥ = 2.18+0.58 −0.72 AU, which indicates that the planet lies beyond the snow line of the host star.

We observed the symbiotic star AG Dra for a total of 61 nights between April 2004 and December 2021 using the 1.8-m telescope and the high-resolution Echelle spectrograph BOES at the Bohyunsan Optical Astronomy Observatory and obtained 355 frames of spectroscopic data to investigate the variations in its spectral lines. Overnight short-term and long-term changes in prominent emission lines are examined. No short-term changes are found in the line profiles. However, the peak intensity of the Hα emission line exhibits very small variation. In the long-term period, many emission lines including He I λ5875, λ6678, λ7065 and Fe II λ5018 are found to vary reflecting the symbiotic outburst activities. It is noted that He II λ4686 and Raman-scattered O VI λ6830, λ7088 are exceptions, where no significant variations are discernible. One of the noticeable lines is the λ5018 line. Its appearance and disappearance pattern are different from other emission lines, and the line is found to appear in outburst states. The Hα and Hβ lines remain very similar in our spectroscopic monitoring campaign.

Zanthoxylum schinifolium is an important short-term income species and a useful resource with various physiological activities. In this study, the distribution and characteristics of seed-rich individuals of Z. schinifolium trees were analyzed. Seed-rich individuals were selected from three regions in consideration of seed yield and growth factors. As a result of the leaf shape survey, the length and width of the leaves were shorter in Jeju and longer in Geochang and Hadong compared to the average. There were very large differences in seed production between individuals within the Z. schinifolium group. The amount of seeds was higher in Jeju and Hadong than in Geochang. As a result of analyzing the correlation between the seven morphological characteristics, the overall correlation coefficient was in the range of -0.910 ~ 0.933. Total seed mass (TS) and seed weight (SW) showed a strong positive (+) correlation. As a result of the principal component analysis, it was classified into two categories. The first principal component showed a high correlation in the order of total seed weight and total seed amount, and the second principal component showed a high correlation with seed length and tree height. As a result of comparing seed production for two years, it was found that there was no change in production. As a result of examining seed viability using the TTC method, all of Z. schinifolium seeds showed more than 90% vitality. It is judged that the above results will serve as basic data for the development of a new variety of seed-rich Z. schinifolium trees.

Background: Although several studies have reported functional improvements after forward walking training on a treadmill and after backward walking training on a treadmill, there is a lack of immediate effects data, investigating spatiotemporal parameter, neuromuscular recruitment. Objectives: To compare the immediate effects between forward and backward walking on treadmill training, present study measured muscle activities of the lower extremity, gait parameters, and dynamic balance. Design: Cross-sectional study. Methods: The twenty-four asymptomatic young male subjects were participated in this study. Subjects have performed 15-min of forward and backward walking on treadmill. Before and after treadmill walking, the gait parameters were measured with the GAITRite. The dynamic balance abilities were assessed with the Y-balance test. Muscular activities were collected from the tibialis anterior, gastrocnemius, biceps femoris, and rectus femoris during forward and backward walking. Results: Muscular activities of the biceps femoris and tibialis anterior were significantly different between forward and backward walking conditions, which were higher with the backward walking (P<.05). Compared to the pre-measurement, the normalized dynamic balance composite score of the post-measurement was significantly higher with the backward walking (P<.05). Regardless of the treadmill training method, there were no significant differences between pre and post measurement, both the stride length and step length (P>.05). Conclusion: The performing backward walking training has positive effects for dynamic balance.

The purpose of this study is to explore relationships between company’s characteristics, the status of business ethics education, employee perceptions of corporate business ethics, and organizational performance. A total of 161 small- and medium-sized apparel companies participated in a survey and data was analyzed using cross-tabulation, ANOVA, and SPSS PROCESS. The results show that, larger companies involved with export are more likely to implement business ethics education, whereas no company characteristic is associated with perceptions of corporate business ethics. Furthermore, apparel companies that implemented or planned to implement business ethics education, have employees with more positive perceptions of corporate business ethics and better organizational performance than fashion companies that have no plan to implement such education. In addition, companies in the apparel sector with higher employee perceptions of corporate business ethics had greater organizational performance than apparel companies with lower employee perceptions of corporate business ethics. This study emphasizes the need to implement business ethics education to enhance employee perceptions of company business ethics, which in turn promotes organizational performance. It is expected that the results of this study will positively affect the development and expansion of business ethics education programs and contribute to the foundation of knowledge for business ethics education for fashion companies.

Outward Foreign Direct Investment (OFDI) is the cross-border capital flow with the objective of the long-term association having at least a ten percent stake in the equity of the host country firm. In the case of new investment, the total equity is OFDI. This research aims to analyze OFDI in the context of China. The lasting interest is considered 10% equity, thereby saying that if the cross-border investment is at least 10% of the equity share capital, the investment would be considered FDI; if below 10%, it is considered to be a Portfolio Investment. We have applied a more emic approach and discussed the determinants of multinational companies (MNCs) from China. Using an exploratory and qualitative approach, case studies of Chinese MNCs are discussed. Secondary data is utilized to obtain a closer insight into the determinants of OFDI from Chinese MNCs. At the end of this paper, suggestions for OFDI policymakers and study limitations are discussed. This research makes recommendations to the Chinese government regarding OFDI in connection with their economic development.

Two tree frogs, Dryophytes suweonensis and Dryophytes japonicus, inhabiting Korea, are morphologically similar and share the same habitats. Therefore, they are identified mainly through their calls, especially for males. Dryophytes suweonensis is registered as an endangered (IUCN: EN grade) and protected species in South Korea. Thus, it is necessary to develop a method to rapidly identify and discriminate the two species and establish efficient protection and restoration plans. We identified significant genetic variation between them by sequencing a maternallyinherited mitochondrial 12S ribosomal DNA region. Based on the sequence data, we designed a pair of primers containing 7 bp differences for high resolution melting (HRM) analysis to rapidly and accurately characterize their genotypes. The HRM analysis using genomic DNA showed that the melting peak for D. suweonensis was 76.4±0.06°C, whereas that of D. japonicus was 75.0±0.05°C. The differential melt curve plot further showed a distinct difference between them. We also carried out a pilot test for the application of HRM analysis based on immersing D. suweonensis in distilled water for 30 min to generate artificial environmental DNA (eDNA). The results showed 1.10-1.31°C differences in the melting peaks between the two tree frog samples. Therefore, this HRM analysis is rapid and accurate in identifying two tree frogs not only using their genomic DNA but also using highly non-invasive eDNA.

This study investigated changes of milk production in dairy cows intramuscularly injected with drugs containing dexamethasone (DXM). Three types of dexamethasone formulations (Bueunde® (DXM 0.5 mg/mL), Dexason INJ.® (DXM 1 mg/mL) and Dexolone-20 inj.® (DXM 1 mg/mL)) were intramuscularly injected into sixteen healthy dairy cows each. Bueunde® was intramuscularly injected into 8 dairy cows with 5 mg (BED-1) and 10 mg (BED-2) of DXM once a day for 3 consecutive days, respectively. Dexason INJ.® was intramuscularly administered once into dairy cows with 20 mg (DXS-1, n=8) and 40 mg (DXS-2, n=8) of DXM, respectively. Dexolone-20 inj.® was intramuscularly injected once into dairy cows with 20 mg (DXS-1, n=8) and 40 mg (DXS-2, n=8) of DXM, respectively. Milk production (MP) of BED-1 and BED-2 significantly decreased during the drug administration and up to 48-hour post-drug treatment. Compared with the MP before drug administration, the MP of DXS-1 and DXL-1 was meaningfully decreased by 36 and 24-hour post-drug administration, respectively, and that in both DXS-2 and DXL-2 significantly decreased until 48-hour post-drug treatment. In conclusion, it was confirmed that the MP temporarily decreased by 48 hours after administration of DXM to dairy cows.

Iris laevigata, which belongs to the Iridaceae, is now designated as an “endangered” (EN) grade by Korea Forest Service because it does not have many natural sites known for its reckless development and damage to its natural habitats. This study was carried out to establish the propagation protocol from seed to restore the native habitat of the I. laevigata and to utilize it for ornamental purposes. Basically, the appearance and internal structure of seeds were observed and imbibition experiments were conducted. Germination rate was measured by cold stratification experiment, after warm followed by cold stratification experiment, and GA3 treatment experiment. The seeds had underdeveloped embryos, which had grown to about 25% of those of fully matured seed before germination. In the controlled laboratory experiment, after cold stratification at 5°C for 0, 4, 8, or 12 weeks, the seeds germinated to 0, 11.7, 43.4, or 51.7%, respectively, after 4 weeks of incubation at 25°C. After warm stratification (25°C, 8 weeks) followed by cold stratification for 0, 4, 8, or 12 weeks, the seeds germinated to 0, 51.7, 85.0, or 88.3%, respectively, after 4 weeks of incubation at 25°C. GA3 treatment did not overcome the dormancy. Our study determined the dormancy type of I. laevigata seed. Imbibition experiments showed that there was no physical dormancy, and it was also found that there was an underdeveloped embryo when it was observed that the embryo was growing according to the period of incubation. A nd t he e m bryo grew a t relatively w arm temperatures. It is concluded that the seeds of I. laevigata have morphophysiological dormancy (deep simple MPD). This is the first report to determine the dormancy type in seeds of this valuable ornamental plant.

Recently, not only traditional statistical techniques but also machine learning algorithms have been used to make more accurate bankruptcy predictions. But the insolvency rate of companies dealing with financial institutions is very low, resulting in a data imbalance problem. In particular, since data imbalance negatively affects the performance of artificial intelligence models, it is necessary to first perform the data imbalance process. In additional, as artificial intelligence algorithms are advanced for precise decision-making, regulatory pressure related to securing transparency of Artificial Intelligence models is gradually increasing, such as mandating the installation of explanation functions for Artificial Intelligence models. Therefore, this study aims to present guidelines for eXplainable Artificial Intelligence-based corporate bankruptcy prediction methodology applying SMOTE techniques and LIME algorithms to solve a data imbalance problem and model transparency problem in predicting corporate bankruptcy. The implications of this study are as follows. First, it was confirmed that SMOTE can effectively solve the data imbalance issue, a problem that can be easily overlooked in predicting corporate bankruptcy. Second, through the LIME algorithm, the basis for predicting bankruptcy of the machine learning model was visualized, and derive improvement priorities of financial variables that increase the possibility of bankruptcy of companies. Third, the scope of application of the algorithm in future research was expanded by confirming the possibility of using SMOTE and LIME through case application.