A cooperative Korea-Japan investigation for the demersal fisheries resources of the East China Sea carried out by using the training ship Oshoro Maru belong to Hok-kaido University, Japan, during 1-8 November, 1991. The research vessel sampled 15 stations with demersal trawls on the East China Sea, and 1,364 nautical miles of track line were surveyed hydroacoustically. The hydroacoustic observations were taken with a scientific echo sounder operating at two frequencies of 25 kHz and 100 kHz, and a microcomputer-based echo integrator. Fish samples were collected by demersal trawling, and temperature, salinity and dissolved oxygen were measured with a CTD system. The target strength of fish school was estimated from the relationship between mean scattering strength and catches caught by demersal trawling. The results obtained can be summarized as follows: 1. The mean backscattering strength for 15 layers occupied by demersal trawls at 25 kHz ranged from -70.4 dB to -59.1 dB. Then the catch per one hour ranged from 8.2 to 587.5 kg/hour. 2. The mean backscattering strength for the entire layer between transducer and seabed in the survey area of the East China Sea at 25 kHz and 100 kHz were -68.0 dB and -73.1 dB, respectively. 3. The mean fish-school target strength per one kilogram at 25 kHz and 100 kHz were -28.3 dB/kg, and -30.4 dB/kg, respectively.

In order to estimate the mesh selectivity master curves and the optimum mesh size, experiments were made by the cover net method with the cod-ends of the five different the opening mesh sizes(51.2mm, 70.2mm, 77.6mm, 88.0mm and 111.3mm). After that 163 hauling were performed and there by investigated, on the training vessel Saebada in the Southern Korean Sea and East China Sea from June 1991 to August 1992. In this report, the mesh selectivity master curves were fitted by using logistic function(S=1/(1+exp super(-(aR+b))), R=(L-L sub(0))/(M-M sub(0)) and the optimum mesh sizes were estimated from each master curve. In this case, a and b are the selection parameters, M is the mesh size of each experimental cod-end. L is body length, L sub(0) and M sub(0) is the distance from the coordinate origine to intersection of linear regression between 25% and 50% selection length. The results obtained are summarized as follows; 1. Trachurus japonicus: Mesh selectivity master curve parameters: a and b were 2. 25, -4.73 respectively and optimum mesh size was estimated to be 79.3mm. 2. Trichiurus lepturus: Mesh selectivity master curve parameters: a and b were 0.81, -3.17 respectively and optimum mesh size was estimated to be 64.5mm. 3. Photololigo edulis: Mesh selectivity master curve parameters: a and b were 1.30m, -4.10 respectively and optimum mesh size was estimated to be 89.9mm. 4. Todarodes pacificus: Mesh selectivity master curve parameters: a and b were 1. 35, -3.45 respectively and optimum mesh size was estimated to be 89.4mm.

Wilbrink 본뜨기에서 모우드 라킹 현상과 소모적 궤적의 두 경우에 대한 일반화차원 D 하(n)을 수치 해석적으로 계산하였다. 투닝변수 z=0.03, 소모변수 b=0.9, k 하(d)=0.272313668의 값으로 주어진 소모적 Wilbrink 본뜨기에서 모우드 라킹현상의 경우에는 n～20일 때 D 하(-20) =0.924202의 값을 갖으며, 소모적궤적에서는 D 하(-20) =0.63292와 D 하(+20) =1.89877의 값으로 주어진다. 이때의 값들은 n→∞감에 따라 Circle 본뜨기의 D 하(±∞) 값들과 근사적으로 일치한다.

This paper deals with the effect of spatial distribution of material properties on its statistical characteristics and numerical estimation method of reliability of fatigue sensitive structures with respect to the fatigue crack growth. A method is proposed to determine experimentally the probability distribution functions of material parameters of Paris law. da/dN=C(ΔK/K sub(0) ) super(m), using stress intensity factor controlled fatigue tests. The result with a high tensile strength steel shows that the distribution of the parameter m is approximately normal and that of 1/C, is a 3-parameter Weibull. The main result obtained are : (1) The theoretical autocorrelation of the resistance, 1/C, to fatigue crack growth are almost same for different lengths. (2) The variance decreases with the increasing a averaging length. When spatial correlation length is very small. the variane decreases significantly were the averaging length. (3) The probability distribution of load cycles or the number for a crack to reach a certain length can be estimated using these functions by simulation of non-Gaussian(expecially Weibull) Stochastic Process.

The proposed method in this paper. termed the substructural reanalysis technique, utilizes the computational merits of the component mode synthesis technique and of reanalysis technique for the design sensitivities of the dynamic characteristics of substructurally combined structure. It is shown that the dynamic characteristics of the entire structure can be obtained by synthesizing the substructural eigensolution and the characteristics of the eigensolution for the design variables of the modifiable substructure. In this paper , the characteristics of the eigenvalue problems obtained by this proposed method are compared to exact eigensolution in terms of accuracy and computational efficiency. and the advantage of this proposed method as compared to the direct application of the whole structure and experimental results is demonstrated through examples of numerical calculation for the dynamic characteristics (natural frequencies and mode shapes) of a flexible vibration of thin cylinderical shell with branch shell under 2-end fixed positions, boundary condition. Thin cylinderical shell of overall length 1280mm, external diameter 360mm, thickness 3mm with branch shell is made of mild steel. The load condition for dynamic response in this paper is impulsive load of which magnitude is 10kgf, which have short duration of 0.1 sec. and time interval applied to calculate. δT is 1.0×10 super(-4) seconds.

Recently. with the rapid development in large sea water systems. there occurs much interest in the study of erosion-corrosion. In this study. the mild steel(SB41) was tested by using of a erosion-corrosion test apparatus with fountain-jet and was investigated under the environments of liquid, air-liquid 2 phase flow and solid particle-liquid 2 phase flow. Main results obtained are as follows : 1. The weight loss by corrosion-erosion in air-liquid 2 phase flow are more increased than that in only liquid solution. 2. Effect of air-liquid 2 phase flow on corrosion-erosion sensitivity becomes more sensitive in natural seawater than that in distilled water. 3. The corrosion potential by corrosion-erosion in air-liquid and solid particle-liquid 2 phase flow becomes noble than that of only liquid solution.

In order to analysis the tensile properties of the high-tech fibers for fishing gear materials. tensile strength was tested on raw materials, single yarns and netting twines(plied yarns)made of nylon, kevlar 29 and techmilon respectively. The results obtained are as follows: 1. The tensile stress and tenacity of unknotted single yarns in dry and wet conditions were 3 to 3.5 times greater in the high-tech fibers than in nylon. But the elongation of the high-tech fibers was about 15% of that in nylon. 2. The tensile strength of knotted single yarns in dry and wet conditions was arranged in order of as follows : techmilon. kelver 29, and nylon. The ratio of knot strength to tensile strength, knot efficiency, was the highest in nylon. 3. The tensile strength of unknotted netting twines in dry and wet conditions was 2.3 to 2.5 times greater in the high-tech fibers than in nylon. 4. The tensile strength of knotted netting twines in dry and wet conditions was arranged in order of as follows : techmilon, kevlar 29, nylon. The knot efficiency was the highest in nylon.

Underwater acoustic positioning systems have been extensively used not only in surface position fixing but also in underwater position fixing. Recently, these systems have been applied in the field of installation and underwater inspection of offshore platforms etc. But in these systems are included the fixing errors as results of a signal with additive noise and irregular motion of vessel by ocean waves. To improve the accuracy of the position fixing a Kalman filter is applied to the supershort baseline (SSBL) acoustic positioning system with beacon mode in noise conditions. The position data obtained by the Kalman filter is compared with raw position data and it is confirmed in the simulation that the former is more accurate than the latter. And an indicator monitoring the filtering effect is described while ship's moving.

In order to investigate the relation between the environmental properties and catch fluctuation of set net fishing ground located in the coastal waters of Yeosu, oceanographic observation and catches on the grounds were carried out from Jan. to Dec. in 1990 and 1992. The results obtained are summarized as follows; 1) Because of the surveyed area is a costal shallow water, the fishing ground was influenced largely by atmospheric phenomena such as air temperature. precipitation. etc. and so showed large variations in temperature and salinity yearly. The inner water flowed out mainly between Yeosu ad Namhe-do, and then through Kumo-do between Dolsan-do and Kumo-do. On the other hand, off shore water was supplied into the fishing ground from the vicinity of Sori-do and Yokchi-do. thus the fishing ground was occupied usually by various sources of water. 2) The water mass in the fishing ground were divided into the inner water(29.0～30.6‰) and the mixed water(31,7～32.2‰) and off shore water(32.3～32.8‰) accourding to the distribution of salinity from T-S diagram plotted all salinity data observed in 1990 and 1992. In summer the inner and mixing water which was formed by river flowed southerly and spread south-easterly in the vicinity of Kumo-do. The off shore water which supplied from the vicinity of Sori-do and Yokchi-do and inner water formed the thermal front and halo front in summer. 3) The fishes caught by the set net were arranged in the order of catch amounts as follows: Spanish mackerel〉Horse mackerel 〉Hair tail〉Common mackerel〉 Sardine〉 Anchovy. The Catches of anchovy and sardine were high in April to May and those of hair tail and horse mackerel in July to September, but spanish mackerel were caught during the whole period of fishing. When inner water and mixing water appeared respectively and inner water and mixing water speared together in the set net fishing ground, the set net showed a high catch.

This paper is described on the positioning accuracy of GPS which has observed from November. 1991 to September, 1992 in Korean southeast coast. The main results give as follows. 1) A daily variance of positioning error is irregularly, and the average error of the latitude and the longitude are 15.1m, 22.7m respectively. 2) The usable satellites in Korean southeast coast from Panggojin to Chisepo are SV satellite number 2, 3, 11～21, 23～26 and sv 28, of all these sv 3, 16, 17, 23, 24 and 26 can be observed in all the area. 3) A circle of the average radius enclose 95% of the measurement points are 72.9m and the average shift distances from standard position are 34.6m. 4) The variation of PDOP(HDOP) at each measurement points are coincide with the one of distance error.

Modal Analysis is the process of characterizing the dynamic properties of an elastic structure by identifying its modes of vibration. A mode of vibration is a global property of an elastic structure. That is, a mode has a specific natural frequency and damping factor which can be identified from response data at practically any point on a structure, and it has a characteristic mode shape which identifies the mode spatially over the entire structure. Modal testing is able to be performed on structural and mechanical structure in an effort to learn more about their elastic behavior. Once the dynamic properties of a structure are known its behavior can be predicted and therefore controlled or corrected. Resonant frequencies, damping factors and mode shape data can be used directly by a mechanical designer to pin point weak spots in a structure design, or this data can also be used to confirm or synthesize equations of motion for the elastic structure. These differential equations can be used to simulate structural response to know input forces and to examine the effects of pertubations in the distributed mass, stiffness and damping properties of the structure in more detail. In this paper the measurement of transfer functions in digital form, and the application of digital parameter identification techniques to identify modal parameters from the measured transfer function data are discussed. It is first shown that the transfer matrix, which is a complete dynamic model of an elastic plate structure can be written in terms of the structural modes of vibration. This special mathematical form allows one to identify the complete dynamics of the structure from a much reduced set of test data, and is the essence of the modal approach to identifying the dynamics of a structure. Finally, the application of transfer function models and identification techniques for obtaining modal parameters from the transfer function data are discussed. Characteristics on vibration response of elastic plate structure obtained from the dynamic analysis by Finite Element Method are compared with results of modal analysis.

예연소실식 디젤기관에 있어서 박용부하운전조건에 따른 연소특성을 규명하기 위해 예언소실의 압력데이터를 single-zone, single-chamber의 열역학적 해석에 적용하여 연소해석을 행한 결과 다음과 같은 결론을 얻었다. 1) 부하가 증가함에 따라 최고압력이 상승하고 그 위치가 크랭크각도상 후진되었다. 2) 착화 지연시간은 부하에 관계없이 거의 일정하고, 부하가 증가할수록 가연 혼합기 형성에 소요되는 흡열량은 겉보기로 감소하였다. 3) 예혼합 연소단계의 열발생 양상은 부하에 관계없이 거의 비슷하고, 예혼합 연소시간은 부하가 증가할수록 짧아졌다. 4) 부하가 증가함에 따라 예혼합 연소량은 다소 증가하나 일정 연공비 이상에서는 거의 일정했다. 5) 예혼합 연소분율은 부하가 증가함에 따라 감소했다.(이 논문의 결론부분임)

한국의 연안어선에 장비된 소형자기컴퍼스의 장비현황과 성능을 연구하기 위하여 소형어선 219척의 선박제원과 자기컴퍼스 이용에 대한 현장 설문조사를 행하고, 그 중에서 총톤수 4-6톤급의 실험대상 어선 4척을 선정하여 그 선박의 자기컴퍼스의 설치위치별 자차측정과 성능실험을 행하고, 이를 검사, 조사하였다. 주요한 결과를 요약하면 다음과 같다. 1. 조사 대상으로 한 총톤수 1-10 톤급 연안어선 219척 중 4톤 미만의 어선은 약 50%를 차지하였고, 자기컴퍼스의 제작연도가 20-30년 경과된 어선이 14척이나 되었으며, 자차수정용구를 비치한 어선은 2척 뿐이었다. 2. 컴퍼스의 설치위치별로 측정된 자차를 분석한 결과, 기관실위의 브리지갑판상과 브리지내의 컴퍼스받침대위 및 브리지위의 컴퍼스 갑판상에 자차수정을 한 자기컴퍼스를 설치하여 사용하면, 브리지내의 컴퍼스대의 위와 브리지위의 컴퍼스 갑판상에서는 잔재자차가 ±1~2 ˚ 정도였으나, 기관실 위의 브리지갑판상에서는 그 잔재자차가 ±5 ˚로 이곳은 컴퍼스 설치 장소로서 부적당함을 알 수 있었다. 3. 연안어선에서 사용 중인 자기컴퍼스의 제반특성은 표준규격인 반주기의 평균치가 12초 이상이어야 하고, 3회 이상 진동해야하는 기준에 미달하였으며, 측정치인 자기능률 1400 CGS는 소형컴퍼스의 표준치 400±30 CGS와는 큰 차이가 있었다. 4. 실험 대상 어선에 장비하고 있는 자기컴퍼스의 수반각은 6~16 ˚로서 한국표준규격인 1~1.5 ˚에 비해 너무 크게 나타나 그 표준규격에 부적합한 것으로 판단되었다.

The purpose of this paper is to study the subject of economic evaluation in respect of optimum ship size and basic design spiral for fishing vessels. The main ta나 is developed the methodology of engineering economic system in order to apply various methods and tools which may be utilized by the designer in his efforts to arrive at principal design characteristics of fishing vessels with optimum size. The design procedure has been modeled in mathematical form with CBR as an criteria and applied to the optimization method. The contents of the study are as follows (the special treatises).

In order to investigate the environmental properties of set net grounds located in the coastal waters of Yeosu, oceanographic observations on the fishing grounds were carried out by the training ship of Yeosu Fisheries University from Jun. 1988 to Dec. 1990. The resultes obtained are summarized as follows; 1) The water mass in the fishing grounds were divided into the inner water (29.50-31.00‰), the mixed water (31.10-32.70‰) and the offshore water (32.70-34.30‰) according to the distribution of salinity from T-S diagram plotted all salinity data observed from Jun. 1988 to Dec. 1990. In spring the mixing water prevailed and in summer the inner and mixing water. But in autumn and winter the mixing and offshore waters prevailed. 2) The inner water which was formed by land water from the river of Somjin and the precipitation in the Yeosu district flowed southerly along the coast of Dolsando and spread south-easterly in the vicinity of Kumodo. The inner water and offshore water which supplied from the vicinity of Sorido and Yokchido formed the thermal front and halofront. 3) As the mixing water flowing from the western sea of Cheju to the southern coast of korea was low in temperature, the water mass of low temperature which appeared at the offshore bottom of Sorido in summer was considered not to be the Tsushima warm current. 4) As vertical mixing was made frequently in spring, autumn and winter, the differences in temperature and salinity between surface and bottom was respectively small. In summer, however, the mixing was not made because of the inner water expanded offshore through the space between surface and 10m layer and so a thermocline of 2.0℃/10m and halocline of 4.0‰/10m respectively in vertical gradient was formed. 5) In the vicinity of Dolsando and Kum a water low in salinity prevailed, but in the vicinity of Namhaedo and YoKchido the reverse took place. The inner and mixing waters formed at these arease was limited to the observation area not to spread widely.