Attacin is a well-studied glycine-rich antibacterial protein in insect immune response, which has limitary antibacterial effect to some Gram-negative bacteria. A cDNA encoding the attacin gene was screened and isolated from the immunized larvae of the swallowtail butterfly, Papilio xuthus. The complete P. xuthus attacin cDNA is 949 nucleotides encoding a 250 amino acid precursor that contains a putative 18-residue signal peptide, a common 42-residue propeptide sequence and a presumed 190-residue mature protein with a theoretical mass of 19904.01 and a pI of 9.13. The putative mature protein of P. xuthus attacin showed 48%~52% and 24%~30% identity in amino acid sequences with that of lepidopteran and dipteran insects, respectively. The attacin transcript was induced at significant level after injection with bacterial lipopolysaccharide (LPS). Recombinant attacin was highly expressed in E. coli BL21 (DE3) cells by fusing with an N-terminal S-tag/thrombin cleavage site configuration protein to avoid the cell death during induction. The expressed fusion protein was purified by Ni-NTA immobilized metal affinity chromatography (IMAC). After desalting and cleavage with thrombin, the recombinant attacin was released and showed considerably antibacterial activity against Gram-negative bacteria, E. coli ML 35. Our results proved that this protein family with a potent antibacterial activity may play a role in the immune response of butterflies.

The study was conducted to explore whether environmental differences, in this case the physical characteristics of abaxial leaf surfaces of strawberry cultivars ('Maehyang' and 'Sulhyang' cultivars), affect the functional response of adult female N. californicus preying on immature stages (egg, larva and nymph) of T. urticae. We also evaluated the functional response of N. californicus to eggs of T. urticae at different temperatures (15, 20, 25, 30 and 35℃). We conducted a logistic regression of the proportion of prey consumed as a function of initial prey density to identify functional response types, and used nonlinear squares regression and the random predator equation to estimate attack rates and handling times. The functional response of adult female N. californicus to T. urticae was not influenced by non-glandular trichomes and epicuticular waxes on the abaxial leaf but was affected by temperature. Overall, the functional response of adult female N. californicus exhibited a type 2 functional response to T.urticae. The handling time of N. californicus was highest (1.9970) against T. urticae nymphs. The attack rate did not change much at 15-30℃, but the handling time decreased linearly with increasing temperature. At 35℃, the attack rate was highest (0.1876) and the handling time was lowest (0.9296). The results of this study may be used to evaluate the potential of N. californicus to suppress T. urticae and to estimate parameters for relevant prey-predator models.

Hereditary dentin defects consists of dentin dysplasia(DD) and denti nogenesis imperfecta(Dr) ‘ The Dl associated with osteogenesis imperfecta has been classified as DI type 1. whereas isolated inherited defects have been categori zed as DI types II and III , However‘ whether DI type III should be considered a distinct phenotype 01' a variation of DI type 1I is debatable , Recent genetic findings have focused attention on the role of the dentin sialo phosphoprotein(DSPP) gene in the etiology of inherited defects of tooth dentin, We have identified novel mlltation( c,727G - > A, p,D243N) at the 243th codon of exon 4 of the DSPP gene in a Korean patient with DI type III The radiographic and histologic features of the patient revealed the classic phenotype of shell teeth These findings sllggest that DI type II and III are not separate diseases bllt rather the phenotypic variation 01' a s ingle disease

The use of natural paint for the application to walls and furnishings is now increasing to improve indoor air quality, thereby the natural paint could be a significant source of biogenic volatile organic compounds (BVOCs) in indoor environments. Recent studies have shown that gas-phase reactions between terpenes and ozone can generate sub-micron size particles and toxic volatile organic compounds such as aldehydes and ketones. In this research, we have studied the formation of particles and secondary organic compounds during the reaction of ozone with terpenes emitted from commercial natural paint. The paint applied onto stainless steel was dried and oxidized in a teflon chamber. Two monoterpenes (α- and β-pinenes) were identified by FTIR and GC/MS. Several tests were performed to evaluate the effects of ozone concentration on particle formation. Increased ozone levels significantly affect the increase of particle number concentration (monitored with SMPS), which results in the increase of particle counts ranging from 8,000 to 70,000 particles/㎤. Gas-phase products such as formaldehyde, acetaldehyde, acetone + acrolein, and propionaldehyde were identified during the terpene/ozone reactions by HPLC. These compounds are potential hazardous chemical compounds having harmful health effects to animals and plants. The results obtained from this study provide an insight on the adverse effect of eco-friendly natural product on indoor air quality (IAQ).

자기공명영상검사는 조직의 대조도 와 해상력이 우수하지만, 인공물이 발생 될 경우 진단에 영향을 주어 판독이 불가능한 영상을 생성하기도 한다. 치아에 삽입된 금속은 강자성체 또는 상자성체로 되어있는 경우 가 대부분이며 자화율 차이로 인하여 기하학적 왜곡을 유발하여 영상진단에 저해되는 경우가 많으며 이를 저감시킬 필요가 있다. 이에 본 연구는 반자성 물질을 사용에 따른 금속 인공물 분석을 실시하고자 한다. 자성 물질로는 치아교정용 와이어와 브라켓인 스테인리스 스틸이 사용되었고 반자성 물질은 구리, 아연, 비스무트를 사용하였다. 검사장비는 1.5T, 3T가 사용되었으며 사용된 시퀀스는 SE, TSE, GE, EPI을 사용하여 측정하였다. 자체 제작된 팬텀을 물질은 균등한 신호를 위하여 아가로스 겔(10%)을 사용하였으며 인공물 유발 물질은 스테인리스 스틸은 팬텀의 정중앙에 위치시켜 검사하고 각 길이 10mm의 정 육면체 반자성 물질의 씌워 검사하였다. 인공물 측정은 Image J를 사용하여 순수한 팬텀 영상에서 자성물질을 포함한 영 상을 감산하여 얻은 영상에서 Low Threshold 값을 10으로 설정 한 후 Wand tool을 사용하여 인공물 영역 설정 후 면적을 구하였다. 스테인리스 스틸에서 발생한 금속 인공물은 반자성 물질 중 비스무트를 사용한 영상에서 금속 인공물이 가장 많이 감소하였으며 구리와 아연은 약간은 감소하지만, 그 정도의 차이는 크지 않다고 하겠다. 이러한 이유는 비스무트의 반자성 자화율이 가장 작아서 강자성체에서의 자화율을 가장 많이 상쇄하였기 때문이라고 생각된다. 1.5T 와 3T 모두에서 비스무트를 사용한 영상의 인공물이 가장 적 게 나왔다. 시퀀스별 인공물 감소는 1.5T에서는 TSE에서 가장 많이 인공물이 감소하였으며 3T에서는 SE에 서 가장 많은 인공물이 감소하였다. 따라서 반자성물질의 따른 인공물 변화의 결과는 자화율(χ)이 가장 낮은 비스무트를 사용한 영상에서 금속인공물이 기준인 Implant 인공물 보다 줄어든 양상을 보여 자화율이 낮은 물질일수록 금속 인공물이 줄어든다는 것을 알 수 있었으며, 기존 금속 인공물의 해결 방법의 단점으로 지적되어온 스캔 시간의 증가 등이 나타나지 않으면서도 인공물을 줄일 수 있는 방법으로 향후 치아 교 정 물질뿐만 아니라 치아 보철물 전체에 대한 금속 인공물 저감에 관한 연구의 기초 자료로 사용될 것으로 사료된다.

치과 콘빔 전산화단층 검사 시 갑상선 부위의 방사선 피폭선량을 최소화하기 위하여 보루스 (Bolus)를 이용한 차폐체를 제작하고, 방사선 차폐 효과와 영상의 적정성을 평가하였다. 치과용 콘빔 전산화단층검사 장비를 사용하여 치과방사선 두부 팬텀을 대상으로 갑상선의 좌, 우측 부위에 유리선량계를 부착시켜 방사선량을 측정하였다. 차폐체의 두께를 각각 10 mm, 20 mm, 30 mm로 다르게 하여 각 차폐체별로 흡수선량을 측정하여 차폐체를 사용하지 않았을 경우와 비교하였다. 8명의 평가자가 진료영상의 적정성을 여부를 평가하였다. 왼쪽 갑상선 부위에 30 mm Bolus 차폐체를 사용한 경우에는 결과값이 평균 342.67 μ㏉로 Bolu s 차폐체를 사용하지 않고 측정한 결과값의 평균 431.22 μ㏉보다 20.7% 감소하였고, 오른쪽 갑상선 부위에 30 mm Bolus 차폐체를 사용한 경우에는 평균 424.56 μ㏉로 21.9%의 선량감소효과를 보였다. 진료 영상의 적정성은 평가자 모두 사용 가능하다 판단하였다. 결론적으로, 치과 콘빔 전산화단층검사 시 갑상선 부위의 방사선 피폭선량을 최소화하기 위해 제작된 Bolus 차폐체는 장해음영 없이 적정한 진단 영상 처리가 가능하고, 방사선차폐 효과가 있어 유용한 차폐체로 적용 가능할 것으로 사료된다.

미국 9.11 사고 이후 테러는 과거에 비하여 다중이용시설 공격을 통한 불특정 다수의 공격이 증가하고 있다. 연이은 런던 폭탄테러, 파키스탄의 자폭 등은 사람들의 공포심 및 사회적 불안감을 증가시켰다. 최근 국내에서 다양한 국제행사가 개최되고 있어, 방사능테러 위협에 대비한 방사성물질의 국가 안보 의식이 증대되고 있다. 본 논문에서는 HotSpot Code를 사용하여 서로 상이한 기상조건에 따른 결과를 비교하였다. 국내에서 발생 가능한 테러 시나리오 작성 후, RDD(Radiological Dispersal Device) 및 더티밤에 사용될 가능성이 높은 선원을 조사하였다. 기상조건은 Pasquill-Gifford 안정도 등급에 따라 가장 안정된 조건의 F, 가장 불안정한 조건의 A를 선택하여 비교하였다. 시뮬레이션을 통한 A, F 등급 결괏값은 방사선학적 영향에 의해 시민들이 급성 영향으로 사망하는 경우는 없다고 판단하였다. 또한, 풍속 및 기상 안정도에 따라 방사능의 도달 정도가 서로 다르며, 기상 조건에 따라 방사능 희석정도가 서로 다름을 확인할 수 있다. 분석결과는 방사능테러 발생 시 초동 대응에 활용할 수 있을 것으로 예상된다.

의료수준의 향상과 더불어 환자들의 첨단의료장비에 대한 기대수준이 증가하고 있으며 특히 자기공명영상(Magnetic Resonance Image : MRI)은 현재 모든 임상 분야에서 가장 핵심적인 영상진단 도구로서 사용되고 있다. 그러나 검사 중에 발생하는 심각한 소음으로 많은 환자가 심리적인 불안을 경험한다고 한다. 이에 본 연구에서는 자기공명영상검사실의 기존 헤드셋 흡음재에서 차음재를 추가한 헤드셋의 소음저감평가와 차음재별 영상 아티팩트(artifact) 유무를 알아보고자 하였다. 3D 프린팅한 헤드셋 내부에 흡음재(스펀지)와 차음재(아크릴판, 구리판, 3D copper plate)를 교차 배열하여 MRI 검사소음을 녹음하여 스피커로 같은 dB 값의 소음을 발생시키며 3D 프린팅 된 두부모형의 내부에 소음측정기로 dB 값을 측정하여 정량분석을 하며 자체 제작한 헤드셋을 물팬텀에 밀착시킨 후 MRI영상 아티팩트 유무를 검사한다. 드셋의 정량평가를 한 결과, 헤드셋 평균 dB 값은 81.8 dB 로 나타났으며, 차음재를 추가한 헤드셋에서 가장 방음효과가 뛰어난 재료조합(구리, 아크릴판, 스펀지, 스펀지) 헤드셋의 평균 dB 값은 70.4 dB 값이 측정되었지만 MRI 시뮬레이션 결과 구리가 반자성체이기 때문에 아티팩트가 나타나 배제하였고 두 번째로 방음효과가 뛰어난 (스펀지, 아크릴판, e-copper plate, 스펀지) 헤드셋의 평균 dB 값은 70.6 dB 값이 측정되었고 MRI 시뮬레이션 결과 인공물 나타나지 않았다. 구리분말이 약 40%가 포함된 e-copper PLA로 출력한 재료를 동일하게 시뮬레이션을 한 결과 인공물 나타나지 않았으므로 3D 프린팅 재료의 사용이 적합하였고 구리보다 경제성이 우수하며 가공이 용이하므로 적합한 재료로 선정하였다. MRI관련 연구에 있어 3D 프린팅을 이용한 상호발전이 매우 기대된다.

The morphometric truss characteristics and classical dimensions of the marine medaka, Oryzias dancena, that might distinguish diploid and triploid fish were examined. Significant differences in all the classical and truss dimensions of the diploid and triploid fish were observed in both sexes (p<0.01). All the dimensions of the triploid fish were greater than those of the diploid fish. The triploid marine medaka shows sexual dimorphism in these characters, and the sexual dimorphism of the triploid marine medaka is similar to that of the diploid marine medaka. Thus, when their classical dimension and truss dimension was measured, the growth of triploid marine medaka is faster than that of the diploid fish, and it displays clear sexual dimorphism, with male fish having longer dorsal and anal fins than female fish.

The objective of this study was to determine the mitotic intervals (τ0) of two consecutive cell divisions and synchronous embryonic cleavage in grass puffer, Takifugu niphobles at different water temperatures (18, 20, 22, and 24℃). The color of the fertilized egg was light yellowish. The egg type was demersal and unadhesive. Egg weight was 0.09±0.002 mg. The sizes of unfertilized eggs were smaller than fertilized eggs in major axis and minor axis at 20℃ (p<0.05). The size of the fertilized egg of 18℃ water temperature group at the blastodisc stage was the smallest (p<0.05), but no significant differences were observed in the other water temperatures group except 18℃ water temperature group (p>0.05). The first cleavage stages at 18, 20, 22, and 24℃ were at 75, 90, 105, and 120 mins, respectively. As water temperature was increased, embryonic development and formation time of the first cleavage furrow were accelerated. There were negative correlation between τ0 and water temperature for grass puffer (Y=–1.225X+70.05, R2=0.988, n=10, where Y was τ0 and X was temperature). This study confirmed that successful hatching of grass puffer was related to water temperature. Chromosome manipulation will be helpful for this species using cleavage frequency and τ0.

Numerical Weather Prediction (NWP) models such as the Weather Research and Forecasting (WRF) model are essential for forecasting one-day-ahead solar irradiance. In order to evaluate the performance of the WRF in forecasting solar irradiance over the Korean Peninsula, we compared WRF prediction data from 2008 to 2010 corresponding to weather observation data (OBS) from the Korean Meteorological Administration (KMA). The WRF model showed poor performance at polluted regions such as Seoul and Suwon where the relative Root Mean Square Error (rRMSE) is over 30%. Predictions by the WRF model alone had a large amount of potential error because of the lack of actual aerosol radiative feedbacks. For the purpose of reducing this error induced by atmospheric particles, i.e., aerosols, the WRF model was coupled with the Community Multiscale Air Quality (CMAQ) model. The coupled system makes it possible to estimate the radiative feedbacks of aerosols on the solar irradiance. As a result, the solar irradiance estimated by the coupled system showed a strong dependence on both the aerosol spatial distributions and the associated optical properties. In the NF (No Feedback) case, which refers to the WRF-only stimulated system without aerosol feedbacks, the GHI was overestimated by 50–200 W m-2 compared with OBS derived values at each site. In the YF (Yes Feedback) case, in contrast, which refers to the WRF–CMAQ two-way coupled system, the rRMSE was significantly improved by 3.1–3.7% at Suwon and Seoul where the Particulate Matter (PM) concentrations, specifically, those related to the PM10 size fraction, were over 100 g m-3. Thus, the coupled system showed promise for acquiring more accurate solar irradiance forecasts.

This study was conducted with the aim of evaluating the antibiotic effects of leaves, stems, and roots in yacon (Smallanthus sonchifolius). Antibacterial activity of leaf extract by disk diffusion method with Bacillus subtilis and Escherichia coli respectively showed 13.3 and 13.75mm diameters of clear zone. There was no significant difference between the stems and leaves. The minimum inhibitory concentration of leaves’ heating and agitation extraction showed a restrain of strain at 1mg/ml, but the stems and root extract did not appear. Yacon is a functional antibacterial material, and methanol extraction is more effective than water. This research was to investigate the growth stage of collection has the most effective antibacterial effects. It has collected yacon's leaves from June to October, which is an appropriate time for collection right before reaping. Yacon leaf has antibacterial effects on Bacillus subtilis, Escherichia coli, Enterococcus faecium, and Salmonella enteritifis. There were no significant differences by the growth stage of collection. Leaves collected in July are high in phenol which helps in sulfating activity works well considering the high scavenging capability of DPPH. Leaves collected in September are high in total flavonoid.

Background : Insect pests damages are increasing on the field of Lycium chinense under eco-friendly organic management and especially, pest damage of Gelechiidae (Ilseopsis parki Povolny) is serious. Currently, various eco-friendly organic materials are registered, but insecticidal activity against Gelechiidae was not verified. Therefore, this experiment was carried out to select eco-friendly organic materials showing insecticidal activity in Gelechiidae. Methods and Results : To test insecticidal activity, the Gelechiidae lavas were collected from the field and Nine eco-friendly organic materials were collected from the market. method. The insecticidal activity assay method was, putting Gelechiidae lavas on the 90mm petridish then water-diluted eco-friendly organic materials were sprayed onto the laver. Result of insecticidal activity was observed with a microscope 10 minutes, 2 hours and 18 hours after the treatment. Microscopic observation results, insecticidal activity was shown only in 5 out of 9 materials. Conclusion : As a result, Insecticidal activity against Gelechiidae was not effective in all tested materials, but the 5 eco-friendly organic materials showed the same effect in repeated experiments. In this study, we selected 5 materials out of 9 eco-friendly organic materials against Gelechiidae, then future studies are planned to select the most suitable materials by field testing the 5 eco-friendly organic materials.

Background : Ginseng is a perennial plant and damaged by various diseases and insect pests. The damage lowers harvest and quality. Accordingly, a chemical control system was made with the aim of effectively control gray mold, anthrax, and spotting disease which occur during growth period. fungicide resistance of gray mold rot was examined to find out whether the chemical control system can be used over the long term. Methods and Results : This experiment was conducted in three areas including Geumsan-gun, Yesan-gun, and Sejong city. The chemical control system was done to the plants of two years old or older. As for the order of the treatment, from the end of April to May Fludioxonil (A) and Pyraclostrobin (B) were used; from the mid-May to the end of July of growth stages Difenoconazole (C), Iminoctadinetris (albesilate) (D), Cyprodinil (E), Metconazole (F), Fluazinam (G) and Pyrimethanil (H); from August to September nonresidualizing polyoxinB + mancozeb (K); in November of hibernating period, Fenhexamid (I) and Carbendazim/diethofencarb (J) were used. As for the interval, from the end of April to the end of July the interval was 10 days, in August and September once a month, and twice in every ten days in November. The isolation of Botrytis cinerea for examination into mycelial growth inhibition rate was conducted to 4-year old ginseng in Geumsan, 5-year old in Yesan, and 3-year old in Sejong. In Geumsan, the mycelial growth inhibition rate to Botrytis cinerea was 75.5% - 100%. Every fungicides showed good rate of mycelial growth inhibition. The lowest rate was seen in fungicide B at 75.5%. K showed the prevention rate at 76.8%, D at 82.7%, and I at 82.2%, and other fungicides at 100%. In Sejong area, the hyphal prevention rate of Botrytis cinerea was 71.0% - 100%, indicating all fungicides show good rate of mycelial growth inhibition. The lowest rate was recorded by fungicide B at 71.1%, D at 81.1%, K at 85.4%, and I at 95.4%. Yesan area also showed similar results to those of Geumsan and Sejong. Conclusion : Botrytis cinerea was isolated from ginseng and mycelial growth inhibition effect was examined in concentration of 11 kinds of fungicides. In all three areas where chemical control system were applied, resistance was not found, suggesting that the chemical control system can be applied to control diseases of ginseng.