Radiological impact analyses were carried out for a near-surface radioactive waste repository at Gyeongju in South Korea. The RESRAD-ONSITE code was applied for the estimation of maximum exposure doses by considering various exposure pathways based on a land area of 2,500 m2 with a 0.15 m thick contamination zone. Typical influencing input parameters such as shield depth, shield materials’ density, and shield erosion rate were examined for a sensitivity analysis. Then both residential farmer and industrial worker scenarios were used for the estimation of maximum exposure doses depending on exposure duration. The radiation dose evaluation results showed that 60Co, 137Cs, and 63Ni were major contributors to the total exposure dose compared with other radionuclides. Furthermore, the total exposure dose from ingestion (plant, meat, and milk) of the contaminated plants was more significant than those assessed for inhalation, with maximum values of 5.5×10−4 mSv‧yr−1 for the plant ingestion. Thus the results of this study can be applied for determining near-surface radioactive waste repository conditions and providing quantitative analysis methods using RESRAD-ONSITE code for the safety assessment of disposing radioactive materials including decommissioning wastes to protect human health and the environment.

Activated carbon fibers (ACFs) were treated by electroless plating of CuO to improve their removal performance for volatile organic compounds (VOCs). The properties of these samples(CuO@ACFs) were evaluated by X-ray photoelectron spectroscopy (XPS), BET and N2O chemisorption to determine the area and dispersion of metallic CuO. The removal efficiency for benzene was investigated by gas chromatography (GC). The breakthrough time of CuO@ACFs increased by approximately 120% compared to that of untreated ACFs at benzene of 100 ppm. CuO@ACFs removed 100% of the benzene in 20 h, indicating this material can be used as a removal technology for VOCs.

Cyanobacteria (blue green algae) blooms formed in natural water resources due to the environmental pollution produce toxic compounds as secondary metabolites, causing health hazards to both humans and other living beings. Microcystin is a well-known toxin produced by cynobacteria. The present study was undertaken to evaluate varying concentrations and exposure times of two different forms of microcystin, viz., -LR (MCLR) and -LA (MCLA), on the motility and seizure-like behavior of planarian (Dugesia japonica). Compared to control, reduced motility was observed in both the MCLR or MCLA treated groups, but did not differ significantly with increasing concentrations of microcystin. However, the number of seizure-like behaviors were increased dose-dependently in planarian exposed to MLCR or MCLA. Exposure time to microcystine also affected the motility and seizure-like behaviors of planarians; 24 hrs incubation with MCLR, and 48 and 96 hrs exposure to MCLA, showed significantly (p<0.05) lower motility, as compared to the control. Assessing regeneration of the planarians revealed the simultaneous completion of eye formation at day 9 in planarians incubated in the absence or presence of MCLR or MCLA, thereby indicating that exposure to microcystin has no effect on the process. In conclusion, we determined that exposure to microcystins resulted in decrease in the number of motility, and induced abnormal behavior pattern in planarians. Further studies are required to identify the toxicity of microcystin that affects aquatic ecosystems.

포인트 클라우드를 활용한 폴리곤 모델 활용에 대해서는 지속적으로 연구되고있다. 이러한 연구는 대부분 하이 폴리곤 모델을 대상으로 생성된 모델을 활용한 기술이다. 오늘날 비디오 게임 등에서 활용되는 하이 폴리곤 모델은 대부분 높은 퍼포먼스를 바탕으로 화려한 효과를 표현한다. 그러나 게임 등의 콘텐츠에 있어서 화려한 효과와 높은 품질의 리소스를 활용한 게임만이 만족도를 충족시켜주는 것이 아니다. 콘텐츠에 따라서 의도적으로 로우 폴리곤 모델을 활용하기도 한다. 인디 게임 등에서는 낮은 접근성을 장점으로 로우 폴리곤 형태의 모델을 제작하여 이를 활용한 게임들도 지속적으로 개발되어 왔다. 따라서 본 연구에서는 이러한 변화에 맞춰서 포인트 클라우드 데이터를 활용하여 로우 폴리곤 모델을 생성 및 음영 처리하는 방법을 제안한다. 여러 개의 모델을 생성하여, 각각의 모델이 하나의 텍스처를 공유하고, 음영을 처리한다. 마지막으로 라이트맵 기법의 결과물과 비교하는 실험을 진행한다.

가상 현실은 현재 미래 지향적인 IT 콘텐츠 분야이며 엔터테인먼트 분야뿐만 아니라 교육, 건축 및 의료 분야까지 꾸준히 확장되고 있다. 이 논문에서는 Unity3D 엔진을 사용하여 심리 치료 콘텐츠의 프로토 타입을 개발하여 심리 치료 콘텐츠로써 가상 현실의 가능성을 실험하고 분석하였다. 심리 치료 시스템과 연결될 수 있는 가상 현실 요소를 분석 한 후 효과적인 치료 요인을 도출하였다. 가상 현실은 다른 콘텐츠에 비해 몰입감과 현 존감이 매우 강한 콘텐츠이다. 현재 엔터테인먼트 산업은 가상 현실 분야에서 가장 발전 된 분야이지만 머지않아 가상 현실이 심리 치료 분야에서 주 콘텐츠가 될 것이다. 본 연구에서는 심리 치료와 관련된 VR 콘텐츠를 연구하고 심리 치료에 효과적인 VR 요소를 추출한 후 Unity3D 엔진을 사용하여 무대 공포증을 치료할 수 있는 가상 현실 콘텐츠의 프로토 타입을 개발하였다. Unity3d 엔진은 VR 콘텐츠 제작에 효과적이고 최적화된 프로 그램이다. 실험 대상 환자와 충분한 피드백 후 환자에 최적화된 시나리오로 프로토타입이 개발되었다. 무대 공포증을 단계적으로 치료할 수 있는 심리 치료 콘텐츠 테스트 결과 일반 상담형, 자료 감상형 치료보다 치료 효과에 대한 만족도가 높은 것으로 나타났다. 본 연구는 향후 개발된 환자 맞춤형 VR 심리 치료 콘텐츠 개발 연구를 위한 예비 연구로써, 심리 치료 콘텐츠로써의 VR의 가능성을 증명하는데 기여할 것이다.

In this work, α-Fe2O3 nanocrystals are synthesized by co-precipitation method and used as adsorbent to remove Cr6+, Cd2+, and Pb2+ from wastewater at room temperature. The prepared sample is evaluated by XRD, BET surface area, and FESEM for structural and morphological characteristics. XRD patterns confirm the formation of a pure hematite structure of average particle size of ~ 40 nm, which is further supported by the FESEM images of the nanocrystals. The nanocrystals are found to have BET specific surface area of ~ 39.18 m2 g−1. Adsorption experiments are carried out for the different values of pH of the solutions, contact time, and initial concentration of metal ions. High efficiency Cr6+, Cd2+, and Pb2+ removal occur at pH 3, 7, and 5.5, respectively. Equilibrium study reveals that the heavy metal ion adsorption of the α-Fe2O3 nanocrystals followed Langmuir and Freundlich isotherm models. The Cr6+, Cd2+, and Pb2+ adsorption equilibrium data are best fitted to the Langmuir model. The maximum adsorption capacities of α-Fe2O3 nanocrystals related to Cr6+, Cd2+, and Pb2+ are found to be 15.15, 11.63, and 20 mg g−1, respectively. These results clearly suggest that the synthesized α-Fe2O3 nanocrystals can be considered as potential nano-adsorbents for future environmental and health related applications.

Thermal decomposition of the uranyl phosphate mineral phase meta-ankoleite (KUO2PO4·3H2O) has been considered in relation to high temperature thermal sintering for the immobilisation of a uranyl phosphate containing waste. Meta-ankoleite thermal decomposition was studied across the temperature range 25 – 1200℃ under an inert N2 atmosphere at 1 atm. It is shown that the meta-ankoleite mineral phase undergoes a double de-hydration event at 56.90 and 125.85℃. Subsequently, synthetically produced pure meta-ankoleite remains stable until at least 1150℃ exhibiting no apparent phase changes. In contrast, when present in a mixed waste the meta-ankoleite phase is not identifiable after thermal treatment indicating incorporation within the bulk waste either as an amorphous phase and/or as uranium oxide. Visual inspection of the waste post thermal treatment showed evidence of self-sintering owing to the presence of glass former materials, namely, silica (SiO2) and antimony(V) oxide (Sb2O5). Therefore, incorporation of the uranium phase into the waste as part of waste sentencing and immobilisation via high temperature sintering for the purpose of long-term disposal is deemed feasible.

This study aims to present the differentiating factors of B2B salesperson competency through comparing the suppliers and buyers in Korean steel industry in their perception on the importance and priority of B2B salesperson competency. Based on previous studies, analysis on B2B salesperson competency has been analyzed using the B2B salesperson performance competency measure factors and appropriately reorganizing them for better application to the steel industry. The required performance competencies of B2B salesperson can be categorized into 3 different types, namely social exchange competency, advisory sales competency, and skill & knowledge competency. AHP analysis was performed for analyzing the relative importance of B2B salesperson competency based on the factors of previous studies, in which categorization of the aforementioned types had been done. As the result, first, it has been confirmed that there is a difference in 1st layer main factors between the supplier group and buyer group. The supplier group valued the advisory sales competency, while the buyer group valued skill & knowledge competency. Second, it has been proved that there is same result of relative importance in 2nd detailed factors between the supplier group and buyer group. Both group confirmed that customer member, identify customer needs and communication skill are very important factors. Third, as the result of analysis on the gap between B2B salesperson competency of the suppliers and buyers, the gap in the product knowledge and sales team member need improvement for buyer’s satisfaction according to overall results of relative importance and priority. The steel supplier was able to develop B2B salesperson competency according to the buyers’ needs based on the result of this study, and furthermore it is expected that this study will be able to contribute to increase in buyer competitiveness through differentiation in B2B salesperson competency.

The objective of the present study was to determine the best model to describe and quantify the changes in live body weight, height at withers, height at rump, body length and chest girth of Holstein cows raised under Korean feeding conditions for 50 months. The five standard growth models namely polynomial linear regression models, regression of growth variables on the first and second-order of ages in days (model 1) and regression of growth variables on age covariates from first to the third-order (model 2) as well as non-linear models were fitted and evaluated for representing growth pattern of Holstein cows raised in Korean feeding circumstances. Nonlinear models fitted were three exponential growth curve models; Brody, Gompertz, and von Bertalanffy functional models. For this purpose, a total of 22 Holstein cows raised in Korea used in the period from April 2016 to May 2020. Each model fitted to monthly growth curve records of dairy cows by using PROC NLIN procedure in SAS program. On the basis of the results, nonlinear models showed the lower root mean square of error (RMSE) for live body weight, height at withers, height at rump, body length and chest girth (12.22, 1.95, 1.55, 4.04, 2.06) with higher correlation coefficiency (R2) values for live body weight, height at withers, height at rump, body length and chest girth (0.99, 0.99, 0.99, 1.00, 1.00). Overall, the evaluation of the different growth models indicated that the Gompertz model used in the study seemed to be the most appropriate one for standard growth of Holstein cows raised under Korean feeding system.

In this study, through an AHP (Analytic Hierarchy Process) analysis, the internal construction project was designed to analyze the factors affecting the performance of the project and provide suggestions on the quality of communication. To carry out this study, a selection factor was selected by referring to AHP theory and existing prior research. AHP technique was used to collect weights after analysis, examine and analyze gaps. In the interior construction project, the most important factor among the factors influencing the quality of communication to the project performance was communication interaction. Among the sub-factors, accuracy of exchange of information and timeliness of communication were shown in the order of importance. Looking at the results of comprehensive analysis of the first and second layers, the accuracy of information exchange among the elements of communication quality was found to be the number 1 in weight. The timeliness of communication, which is ranked second, and communication that takes place at an appropriate time can lead to efficiency in shortening the project execution period by eliminating unnecessary work. And, Among the factors that affect communication quality, it was analyzed that communication method is not an important factor when compared to other factors. This study shows that quality of communication influences the performance of interior construction projects and provides suggestions for improving communication quality. And it has been confirmed that managing communication quality can act as an important issue that can improve business performance in project execution and production of results.

This study was conducted at the National Institute of Animal Science from 2010 to 2017. As a variety that is sufficiently productive in the southern regions to replace imported varieties and sufficiently cold-resistant to be cultivated in the central-northern regions, "IR605" was developed and submitted to the Korea Seed & Variety Service in an application for protection. The novel Italian ryegrass variety "IR605" is a diploid with green leaves, a semi-erect growth habit before wintering, and an erect growth habit in the spring. "IR605" was a medium maturing variety with a heading date of around May 15th. "IR605" had a flag leaf width of 9.9 mm, flag leaf length of 26.7 cm, and plant length on the heading date of 100 cm, which was approximately 5 cm longer than "Kowinearly." The stem thickness and ear length of "IR605" are 0.08 mm thicker and 0.5 cm longer than those of "Kowinearly", respectively. The cold-resistance of "IR605" was weaker than that of "Kowinearly", but strong enough to be cultivated in Pyeongchang, Gangwon province. The dry matter yield of "IR605" (9,308 kg/hectare) was 20% higher than that of "Kowinearly", which was further pronounced in the southern region of Haenam, where there was a 52% increased (p < 0.05). The in vitro dry matter digestibility of "IR605" was 68.4% at which was slightly higher than that of "Kowinearly", The total digestible nutrients was 58.5%, which was slightly lower than "Kowinearly". Overall, the feed quality characteristics of "IR605" were similar to those of "Kowinearly".

Melia azedarach is commonly used in traditional and folk medicine in Korea and China to treat a variety of diseases including diarrheal, diabetic, rheumatic, and hypertensive disease. The aim of this study was to determine the potential prophylactic and therapeutic effects of Melia azedarach against a broad spectrum of viruses in in vitro cell culture model and the protective effect against different influenza A subtypes in BALB/c mice model. An effective dose of pre-treatment, co-treatment, and post-treatment of Melia azedarach significantly reduced the replication of coxsackievirus, herpes simplex virus, influenza A virus, enterovirus, and bovine rhinovirus in both epithelial and macrophage cell lines. Melia azedarach treatment remarkably promoted the phosphorylation of the key molecules associated with the type-1 interferon and NF-κB signaling pathways. Furthermore, it induced the secretion of type-1 interferon and pro-inflammatory cytokines and the subsequent stimulation of the antiviral state in both epithelial and macrophage cells. Interestingly, oral inoculation of an effective dose of herb extract significantly improved viral clearance in the lungs of BALB/c mice, thus exhibiting protection against several subtypes of influenza A virus. Together with our results indicate that an extracts of Melia azedarach and its components could exhibit a potential natural source of an antiviral drug candidate for a broad spectrum of viruses in animal and humans.