검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 5

        1.
        2024.02 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Silicon carbide (SiC) has emerged as a promising material for next-generation power semiconductor materials, due to its high thermal conductivity and high critical electric field (~3 MV/cm) with a wide bandgap of 3.3 eV. This permits SiC devices to operate at lower on-resistance and higher breakdown voltage. However, to improve device performance, advanced research is still needed to reduce point defects in the SiC epitaxial layer. This work investigated the electrical characteristics and defect properties using DLTS analysis. Four deep level defects generated by the implantation process and during epitaxial layer growth were detected. Trap parameters such as energy level, capture-cross section, trap density were obtained from an Arrhenius plot. To investigate the impact of defects on the device, a 2D TCAD simulation was conducted using the same device structure, and the extracted defect parameters were added to confirm electrical characteristics. The degradation of device performance such as an increase in on-resistance by adding trap parameters was confirmed.
        4,000원
        2.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Agrobacterium tumefaciens strain CP4 유래 5-enolpyruvylshikimate- 3-phosphate synthase (EPSPS) 유전자를 포함하는 유전자변형생물체 (Living modified organism, LMO)가 개발되었다. 이 같은 LMO는 국내 승인되어 사료용, 식품용, 가공용으로 이용 중이다. 간이면역 검사키트 개발을 위해서는 고효율의 단클론 항체 개발이 필수적이다. 본 연구에서는 대장균 BL21 (DE3)에서 재조합 CP4 EPSPS 단백질을 정제하였으며 SDS-PAGE와 MALDI-TOF MS 분석으로 단백질 특성을 분석하였다. 단클론 항체 제작은 ㈜앱 클론의 SOP 매뉴얼에 따라 진행하였다. 본 연구 결과 5개의 단클론 항체 클론 (2F2, 4B9, 6C11, 10A9, 10G9)를 확보하였다. 5종의 단클론 항체의 효율과 특이도 검정을 위해서 LM 면화 추출액을 이용한 western blotting 분석을 실시하였다. 모든 단클론 항체는 CP4 EPSPS를 함유하는 MON1445와 MON88913을 특이적으로 검출하였으며 비변형 면화 및 타종의 LM 면화에서는 검출되지 않았다. 이러한 결과들을 바탕으로 CP4 EPSPS 단클론 항체는 LMO 에 함유된 CP4 EPSPS 단백질을 타겟으로 항체 기반 검출법 개발에 활용될 것으로 사료된다.
        4,000원
        3.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        면화는 중요한 섬유 작물로 종자는 가축의 사료로 사용 된다. 작물 생명공학은 농업 분야에서 농업적 형질과 질을 향상시키기 위해 활용되어져 왔다. 국내 식품, 사료, 가 공 제품에 유전자변형 (LM) 면화의 사용이 증가함에 따라 환경으로의 LM 면화의 비의도적 유출 또한 증가하고 있다. LMO 모니터링 사업에서 수집된 LM 면화를 검정하기 위하여 국내 수입 승인된 LM 면화의 검출법 개발이 필요하다. 본 연구에서는 LM 면화 MON757, MON88792, COT67B, GHB811 4종을 대상으로 동시검출법을 개발하였다. 이벤트에 대한 유전 정보는 유럽 JRC와 농림축산검역본부에서 확보하였다. LM 면화의 동시검출법 개발을 위해 이벤트 특 이적인 프라이머를 설계하였으며 특이적인 증폭을 확인하였다. 특이도 검정, 무작위 표준물질 혼합물 분석, 검출한계 분석을 통하여 동시검출법의 정확도와 특이도를 검증하였다. 그 결과 본 동시검출법은 각각의 이벤트를 검출할 수 있으며 LM 표준물질을 활용하여 특이도를 검정하였다. 또한 무작위 표준물질 조합도 정확하게 검출할 수 있다. 검출한 계 분석에서는 25 ng의 미량의 주형 DNA로 단회 분석으로 검출이 가능하다. 결론적으로 4종의 LM 면화 동시검출법을 개발하였으며 LM 면화 자생체 분석에 활용될 것으로 사료 된다.
        4,000원
        4.
        2017.04 구독 인증기관·개인회원 무료
        뾰족날개선녀벌레는 2013년 익산에서 처음 확인된 이후 2015년 3개 시군(정읍, 전주, 서천), 2016년 4개 시군(담양, 장성, 나주, 울산)에서 추가 확인되었다. 약충은 6월 초부터 7월 말까지, 성충은 7월 말부터 9월까지 확인되었다. 기주식물은 총 13종이 확인되었고, 그 중에서 밤나무(Castanea crenata)를 가장 선호하는 것으로 나타났다. 발생 밀도는 낮지만 국내 기후에 적응하여 개체수가 증가할 경우 약충의 흰색 납물질과 흡즙으로 인해 수세약화 및 그을음병을 유발할 수 있어 피해가 우려된다. 또한 mitochondrial cytochrome oxidase subunitⅠ(mtCOⅠ) 유전자의 염기서열을 처음 보고하며, NCBI BLAST 결과 같은 과(Family)에 속하는 미국선녀벌레(Metcalfa pruinosa), 선녀벌레 (Geisha distinctissima), Flatormenis proxima와 가장 높은 유사성(86%)을 보였다.
        5.
        2008.10 KCI 등재 서비스 종료(열람 제한)
        Road runoff, one of non-point source pollutants, contains various heavy metals, most of which flow into discharge waters without being treated. The mechanism of removing the heavy metals in water is similar to that of removing micro-particles. Therefore, it is considered that it is possible to remove a lot of the heavy metals contained in the road runoff by filtering or absorbing them. In this paper, performed has been a basic study on the characteristics of UNFS (Up Flow Non-Point Source Filtering System) using carbide pellet and zeolite pellet as double-layer filtering mediums to treat the road runoff. The removal rate with filtering and absorption time has been shown as follows: 29.0% for Cr; 27.8% for Cd; 25.7% for Fe; 25.4% for Co; 21.2% for Pb; 19.6% for Zn; 18.2% for Al; 17.0% for Mn; 11.3% for Ni; 7.5% for Cu. The overall removal rate according to influx change has been shown to be approximately 30%, and the load of heavy metals flowing out in initial precipitation could be reduced by using carbide as a recycling filtering medium. When the removal as coarse particles settle is added up, it is expected that UNFS will result in a higher removal rate.