This study aims to design a new sizing system for hygienic masks to protect against COVID-19-related respiratory disorders. The product sizes were collected from 70 commercially available hygienic masks, and 18 head measurements were obtained from the three-dimensional (3D) scan data of 2,048 men and women aged 20 to 69 years from the 6th Size Korea Survey. The statistical analysis was performed using the IBM Statistical Package for the Social Sciences (SPSS) 28.0 program. The “bitragion-subnasale arc” and “menton-sellion length” were chosen as the key body dimensions for the hygienic mask sizing system. The linear regressions with 18 3D head measurements were analyzed, and it was determined that the key body dimensions were useful for statistically predicting other 3D head measurements related to hygienic masks. A new sizing system was proposed for two types of masks, “masks with a tight fit” and “masks with a loose fit,” taking into account the existing Korean Industrial Standards (KS) and the shortcomings of the sizes of hygienic masks on the market. The sizing system for tight-fitting masks consisted of the key body dimensions, with their sizes indicated by a pair of numbers. The sizing system for loose-fitting masks consisted solely of the bitragion-subnasale arc, with their sizes denoted by letters such as S, M, and L (denoting small, medium, and large, respectively). Future studies should consider this mask sizing system for different age groups, such as children and adolescents.

The purpose of this study was to analyze changes to body measurements and silhouettes after wearing an early 19th century women’s corset. Two types of corsets were tested. Changes in body size and silhouette were compared based on the levels of tightening strength of the corset. The tightening strength was adjusted in 4 steps by making the length of back fastening string 10-40 cm shorter than the standard. The silhouette was compared with the front silhouette and the side silhouette. The results were as follows. After wearing the experimental 19th century corsets, the chest circumference and front interscye length increased. However, the chest circumference did not increase proportionally to the tightening strength. The underbust circumference, waist circumference, and back interscye length also decreased. The waist width was decreased to create a slim front silhouette. The change in the body silhouette differed depending on the style of the experimental corset. The experimental corset made with the six-piece torso pattern changed the posture so that the shoulders were pulled back and the chest was pushed forward. The experimental corset with the side bodice pattern resulted in the subject’s shoulders reclining backward and the chest and abdomen extending forward. The results of this study show that women’s body sizes and silhouettes could be changed by wearing the early 19th century corsets, but the changes in body size and silhouette vary depending on the wearer's individual body type or corset style.

This study aimed to create 3D-printed insoles for flat-footed senior men using 3D systems. 3D systems are product-manufacturing systems that use 3-dimensional technologies like 3D scanning, 3D modeling, and 3D printing. This study used a 3D scanner (NexScan2), 3D CAD programs including Rapidform, AutoCAD, SolidWorks, Nauta+ compiling program, and a 3D printer. In order to create insoles for flat-footed senior men, we analyzed horizontal sections of 3D foot scans We selected 20 flatfooted and 20 normal-footed subjects. To make the 3D insole models, we sliced nine lines on the surface of the subjects’ 3D foot scans, and plotted 144 points on the lines. We calculated the average of these 3D coordinates, then located this average within the 3D space of the AutoCAD program and created 3D sole models using the loft surface tools of the SolidWorks program. The sole models for flat feet differed from those of normal feet in the depth of the arch at the inner sideline and the big toe line. We placed the normal-footed sole model on a flat-footed sole model, and the combination of the two models resulted in the 3D insole for flat feet. We printed the 3D modeled insole using a 3D printer. The 3D printing material was an acrylic resin similar to rubber. This made the insole model flexible and wearable. This study utilized 3D systems to create 3D insoles for flat-footed seniors and this process can be applied to manufacture other items in the fashion industry as well.

In the Korean fashion industry, 3D printing systems are considered as new technology and a new opportunity. With 3D printers, consumers can be manufacturers and individuals can develop businesses with little upfront capital. In this study, a dress form for the typical Korean women’s body shape was developed using 3D technology (3D scanning, 3D modeling, and 3D printing). Ten women with apparel sizes 85-91-160 were selected from 3D body-scan data collected by SizeKorea of 201 women aged 25 to 34 (2010). First, 15 horizontal cross-sections were collected from the 3D scan data of the 10 subjects. Then, inside lines of those cross-sections were drawn at 15-degree intervals, and the lengths were measured. The average of the inside lines was connected to the internal spline curve, and the curves were used as the average cross-sections. The average torso body and the dress form of Korean women were developed into a 3D solid model using a 3D CAD program (Solidworks 2012). An output mockup was printed by the FDM type’s 3D printing system (Bonbot 1200, Bonbot 3-H4) using PLA material. The dimensions comparing the 3D solid modeling to the 3D printed mockup of the dress form were measured, and minor differences were between 0.00cm and 0.40cm. In the future, 3D printing systems are expected to be in use for various personalized dress forms.

In the 2010s, skinny jeans were trendy, and they became a must-have for young women. The styles, clothing pressure and buying behavior of skinny jeans have been studied, but the patternmaking of skinny jeans has not been researched yet. To analyze skinny jeans patterns, we grouped skinny jeans into nine brands. They were sorted into three groups: special jeans brand, trendy jeans brand, and SPA brand. This study compared skinny jeans' sizing systems, product dimensions and pattern measurements in three brand groups. The appearance and fit of skinny jeans were evaluated by random groups of people in their 20s and 30s. The sizing systems for skinny jeans were different with KS K0051, and they were shown waist girth in inches. The waist and hip circumferences were different among brand groups. In product dimensions, trendy jeans brands had a shorter crotch length, a lower crotch depth, a narrower back crotch width, and a longer inseam than the others. The measurements of skinny jeans flat patterns were significantly different in as below; front crotch depth, front crotch height, front crotch length, back crotch extension, gap between back and front crotch depth, back crotch height, back crotch length, and center back angle. In the sensory survey results, trendy jeans brands were evaluated well in the fit of the waist line, hip line, crotch line, midthigh line, outseam, inseam, side waist line, crotch length and overall fit.

The purpose of this study was to develop a shirt pattern that enhances the functionality of golf swing motions. The pattern was made with 3D body surface shape data that changed according to dynamic golf postures. The data were collected from the golf swing motions. The 3D body surface data in golf swing postures piled up on the 3D surface data in a static posture. The results showed that the surface shape data changed more in the address, back swing, and finish postures than the other swing postures. The experimental pattern was developed with 3D surface scan data in those three golf swing motions. The pattern had raglan sleeves and the front-bodied piece was divided into two pieces with a princess line, which comes from armscye line of the address posture. The back bodice piece was divided into three pieces with a yoke line and a back princess line. The yoke line was made by back shoulder shape in the back swing posture. The level of comfort of the experimental garment and commercial golf shirts was evaluated by 38 women golfers. The experimental garment pattern was evaluated to be more comfortable in golf swing postures than commercial golf shirts.