Seismic intensity deduced from instrumental data has been evaluated using the empirical relationship between intensity and peak ground acceleration (PGA) during an earthquake. The Japan Meteorological Agency (JMA) developed a seismic intensity meter, which can estimate the real-time seismic intensity from seismic motions observed at a local site to evaluate the damage during the earthquake more correctly. This paper proposes a practical application of the JMA intensity to dams during the 2013 earthquake in Yeongcheon, Korea. In the present paper, seismic intensity was estimated from the relationships between accelerations observed at Yeongcheon Dam. Estimated seismic intensities were in the range of 0 to 3, which was verified from the displacements of dams and the variation of the ground water level observed at Yeongcheon dam during the earthquake. The JMA intensity, which is determined by considering the frequency, duration of cyclic loading, etc., was 0 (zero) and there was no damage to Yeoncheon dam during the earthquake.

Climate change and the frequency of natural disasters such as earthquakes are threatening dam safety. In order to carry out the high functions of reliability of the dam facilities, K-water is promoting the safety enhancement project of dams.

In this study, in order to measure the seepage through dam body and foundation, we conduct geophysical survey such as electromagnetic survey in A dam that has not been measured quantitative seepage. Therefore we will analyze the reasons and establish the improvement.

Deformation monitoring of dams has been widely used for its safety management. In this study, improvement of the deformation monitoring with a total station was suggested by calibrating coordinate of a total station. The position of TS was initially measured through 3∼4 given points and the coordinate of total station was considered as an absolute value. However, when the targeting point was measured by the total station, the coordinate of the total station was changed and it means that deformation of the total station was also occurred. Therefore, the deformation of dams was increased by deformation of the total station. Before the calibrating, the deformation of the target point located at 50m from total station was ±20mm. After the calibrating, the deformation was decreased by ±2mm.

수자원시스템의 설계공급량을 결정하기 위한 평가지표의 선택은 수자원기술자가 직면한 중요한 문제이다. 대부분 신뢰도, 회복도 그리고 취약도를 대상으로 평가하게 된다. 그러나 각 지표 간에는 중복성이 있고 회복도와 취약도는 용수공급 여건이 나빠져도 개선되는 증감현상이 나타날 수 있다. 실제 적용에서는 이와 같은 문제점을 인지하지 못하고 한번 계산된 추정치로 판단하는 경우가 대부분이다. 이런 현상에 대한 원인은 수자원시스템의 다양한 특성에 의해 나타나고 있는데 수문 및 수요의 계절적 변동성이 대표적이다. 본 연구에서는 우리나라 댐 설계시 일반적으로 적용하고 있는 신뢰도 지표에 추가하여 다기준 적용을 위한 회복도 및 취약도의 적용성을 분석하였다. 분석방법은 계절적 변동성이 큰 농업용수의 구성비율을 기준으로 7개댐을 선정하여 각 지표 간 상관성과 증감현상을 분석하였다. 분석 결과, 연중 일정량을 공급하는 용담댐은 일반적 추세를 보였으나 농업용수를 공급하는 충주, 안동 및 남강댐 등은 회복도와 취약도에서 증감현상이 뚜렷이 나타났다.

본 연구에서는 제한된 수자원 부존량을 효율적으로 사용하고 각 댐의 저류량, 수요에 대한 용수공급량 및 하천유지용수를 최대화하기 위해 댐 상 하류간의 연계운영 모형을 이용하여 연계운영 효과를 분석하고 댐과 보의 최적 연계운영을 통한 하류단의 수문학적 거동 특성 변화를 검토하여 댐운영 개선방안 도출 등 다양한 하천관리 개선 방안에 대해 연구하였다. 대상유역은 신뢰성 높은 수문자료를 획득 가능한 금강 수계 유역으로 하였으며 수문자료는 순물소모량을 감안한 '6