In this study, we investigated the effects of diesel-palm oil biodiesel-ethanol blends on combustion and emission characteristics in a 4-cylinder common rail direct injection (CRDI) diesel engine at low idling operations. The engine speed and engine load was 750 rpm and 40 Nm, while the main and pilot injection timing was respectively fixed at 2 °CA before top dead center (BTDC) and 20 °CA BTDC. The experimental results showed that the cylinder pressure increased with the increasing of palm oil biodiesel ratio from 20% to 100%. In addition, the peak value of cylinder pressure increased by 4.35% compared with pure diesel fuel when 5 vol.% ethanol oil added to diesel oil. Because the palm oil biodiesel and ethanol are the oxygenated fuel, the oxygen content played an important role in improving combustion. Based on the high oxygen content of biodiesel and ethanol, their mixing with diesel fuel effectively reduced PM emissions but increased NOx slightly, while CO and HC had no significant changes.

In this study, the effect of various pilot injection timings on combustion and emission characteristics were investigated in a common-rail direct injection (CRDI) diesle engine fueled with diesel-ethanol blends. The engine speed and engine load were controlled at constant 1500rpm and 70Nm, respectively. The tested fuels were DE0 (pure diesel fuel), DE5 (5 vol.% ethanol blended with 95 vol.% diesel oil), DE10 (10 vol.% ethanol blended with 90 vol.% diesel oil) and DE15 (15 vol.% ethanol blended with 85 vol.% diesel oil). The main injection timing was fixed at 0°CA TDC (top dead center), while various pilot injection timings including 25°CA BTDC (before top dead center), 20°CA BTDC and 10°CA BTDC were selected as the experimental variable. The experimental results showed that various pilot injection timings had little effect on the peak value of cylinder pressure, but had great influence on the start of combustion. The peak value of heat release rate (HHR) increased with the increase of ethanol content. However, the peak value of HRR reduced as the pilot injection is delayed. The diesel fuel containing 10% ethanol had a highest peak value of combustion pressure compared with the others, while the pilot injection timing occurred at 25°CA BTDC. On the other hand, the exhaust emissions of DE10 was also the lowest compared with the others. In addition, with the increase of ethanol content in diesel the PM and NOx emissions reduced.

Deicing agent refers to the substance that melts snow by exothermic or endothermic chemical reaction after spraying on snow. It also has the function of reducing the freezing point to prevent freezing. However, the long-term use of deicing agent can cause some negative problems, such as pot hole, concrete corrosion, vehicle and steel bridge parts corrosion. At present, wet salt spray deicing is a cost-effective deicing method that is being widely used. Typical deicing agents are calcium chloride and sodium chloride. Deicing equipment is placed to similar or higher corrosive environment than coastal or marine environment due to direct contact to chloride in deicing operation. Therefore, the anti-corrosion control is very important for the maintenance of deicing equipment. In this study, corrosion resistance, blistering and repairability of the deicing equipment were tested by using test standard (salt water production and spraying- KS D 9502 , evaluating degree of rusting- ASTM D 610, evaluating degree of blistering- ASTM D 714, pull-off strangth of coatings- ASTM D 4541). And an economical coating system with long-term antirust performance was constructed. The results show that the performance of the coating system has been improved than with the original coating.

This study describes the effects of palm oil biodiesel (PD) blended with diesel on the combustion performance, emission characteristics and soot morphology in a 4-cylinder CRDI diesel engine. 5 kinds of fuels are used with blending as diesel/biodiesel volume ratio 0%, 10%, 20%, 30%, 100%. The engine is operated under idle speed, 750rpm and load conditions of the engine are 0 Nm and 40Nm. The Coefficient of Variation(COV) of Indicated Mean Effective Pressure(IMEP) shows that the engine operates very steadily in the idle state. But fuel consumption is increased. And Emission results show that the oxygen in biodiesel has a great influence on the production of exhaust emissions. The nitrogen oxides(NOx) is decreased because of high viscosity and low heating values of biodiesel at low blend ratio. But NOx and Carbon monoxide(CO) are increased above a certain blend ratio. Particulate matter(PM) and Hydrocarbons(HC) is decreased according to increase of blend ratio. The size of soot is decreased and the morphology of soot is developed to cluster with increasing blend ratio.

Volatile organic compounds (VOCs) are a source of air pollution and are harmful to both human health and the environment. In this study, we fabricated polyurethane/rare earth (PU/RE) composite nanofibrous membranes via electrospinning with the aim of removing VOCs from air. The morphological structure of PU/RE nanofibrous mats were investigated using FE-SEM, EDX, and XRD experimental analyses. A certain amount of RE (up to 50 wt% compared to PU pellets) particles could be loaded on/into PU fibers. The PU nanofiber containing 50 wt% RE powder had the smallest fiber diameter of 356 nm; it also showed the highest VOCs absorption capacity compared with other composite membranes, having an absorption capacity about 3 times greater than pure PU nanofibers. In addition, all of the PU/RE nanofibrous membranes readily absorbed styrene the most, followed by xylene, toluene, benzene and chloroform. Therefore, the PU/RE nanofibrous membrane can play an important role in removing VOCs from the air, and its development prospects are impressive because they are emerging materials.