검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 6

        1.
        2024.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Research has been conducted on a wide variety of 3D printer circular fin heads. In this study, we proposed a sequence and method for a more efficient mesh study in the CFD model to calculate the Nusselt number of the circular fin head of an FDM 3D printer using the Taguchi method, sensitivity, and ANOVA. As a result, the CFD model to calculate the Nusselt number of the circular fin head of an FDM 3D printer has high sensitivity and contribution in the order of Base target mesh size, Prism layer number, and Prism layer thickness. We propose to increase work efficiency by performing mesh optimization in the order of factors with high sensitivity to level changes.
        4,000원
        2.
        2023.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The automotive industry continuously strives to enhance safety for both drivers and passengers through technological advancements. Car side impacts have the potential to significant risks to passengers, So the automotive industry has proposed various technological solutions. As part of these efforts, the development of side impact beams, which are affixed to the inner frame of vehicle side doors to absorb and dissipate collision energy, has been a safety enhancement. Conventional side impact beams are manufactured using hot-rolled steel sheets and have a pipe-like configuration. However, these impact beams are fixed to the vehicle's chassis, which directly transfers the energy generated during a collision to the chassis frame. This paper aims to address this issue by proposing the development and optimization of vehicle door impact beams using a dual-beam structure and fastening method, utilizing shear bolts. Moreover, the focus is on optimizing the cross-sectional shape of the dual-beam impact structure. The evaluation criterion for optimization is based on the second moment of area of the cross-section. To validate these improvements, Static experiments were conducted, comparing the proposed dual-beam structure with the traditional impact beam. This research is expected to serve as a guideline for enhancing vehicle safety through design directions and validation methods.
        4,000원
        3.
        2022.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Recently 3d printer industry has two demands. first is color 3d printing. second is mass production using 3d printer that has large bed. According to previous studies, 3D printed objects have different weights depending on filament colors. 3D printed tensile specimens with filaments of various colors were checked to see they had the same weight. If so, we wanted to see it was statistically significant. As a result, we found that the weight of 3D printed objects was statistically significantly different depending on the filament color. The average weight of 3d printed objects is: Black(8.63g), Blue(8.58g), Yellow(8.53g), White(8.48g), Natural(8.46g), Green (8.45g), Red(8.42g).
        4,000원
        4.
        2022.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The SLA 3d printer is the first of the commercial 3D printer. The 3D printed output is printed hanging on the bed that move to the upper position. Sandblasted bed is used to prevent layer shift. If sandblasting is wrong, the 3D printed output is layer shifted. For this reason, 3D printer manufacturing companies inspect the bed surface. However, the sandblasted surface has variety of irregular shapes and craters, so it is difficult to establish a quality control standard. To solve problems, this paper presents a standardized sandblasting histogram and threshold. We present a filter that can increase the classification rate.
        4,000원
        5.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        FDM 3D Printer is used in maker space for mass production by the maker. Makers desire to manufacture products in a variety of colors using ABS Filaments. The purpose of this study is to identify the relation between the color of resin and each position on the bed. So, when printed using the 3D Printer, we found out the difference in the colors that it appears depending on the position of the bed. To see the difference in color, basic, blue, yellow, white, and black were selected and the bed plate was divided into three sections. Specimens were measured to obtain delta E values between each sections by the chromatic differential system. Obtained delta values were analyzed by the NBS system. As a result, the delta E value of black was found to correspond to “Appreciable”. In most cases, delta E values between the middle and the outer or the inner and the outer was greater than values between the middle and the inner. Using Infrared Thermal Camera, We found that the color difference relates 3D printing positions and temperatures. As a result, the 3D printing bed positions should be considered when 3D printing mass production.
        4,000원
        6.
        2006.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        이 연구의 목적은 국제합작기업에서의 파트너 간 신뢰관계 형성의 요인을 분석하는 것이다. 국제합작기업을 설립한 파트너 간에 신뢰관계를 형성하는 중요한 요소로서 프로세스 공정성과 분배 공정성을 주목하고, 두 가지 공정성을 국제합작기업에 적용하기 위한 개념의 확장을 시도한다. 국제합작기업에 있어서, 프로세스 공정성으로서 공정한 공동 의사결정 프로세스와 문화적 적응을 제시하고, 분배 공정성으로서 공정한 결과물의 분배와 교섭력의 분배를 제시한다. 한국내 109개의 국제합작기업에서 구성된 표본을 사용해 실증분석을 실시한 결과, 프로세스 공정성과 분배 공정성이 국제 합작기업에서의 파트너 간 신뢰관계 형성에 영향을 미치는 것으로 밝혀졌다.
        8,700원