Impact Severity is important parameter to design concrete barrier in South Korea. However, maximum load and load-time history graph showed different depending on parameters under vehicle impact loading. Therefore, in this study, analysis according was conducted to various impact conditions such as vehicle mass and impact velocity under same impact severity. Obtained results from load-time history graph showed key parameter is velocity compared to vehicle mass.

Recently, wind turbine industry have received more attention than before. Many countries including South Korea focus on the offshore wind turbine because of its geographical advantage. However, domestic technique level is much lower than that of advanced countries such as Europe. In this study, analysis on development trend of offshore wind turbine and design standard in Europe is carried out to develop the original design standard.

To calculate back the soil pressure acting on culverts, a technique for estimating the actual soil pressure has been established. The comparison between the design soil pressure and the real soil pressure is included.

본 논문에서는 철근 콘크리트 단면에서 동시에 진행되는 중성화와 염화물 침투에 의해 진행되는 내구성 문제에 대해 서로 다른 콘 크리트의 특성과 주변 환경의 영향을 매개변수 분석을 통해 수행하였다. 이를 위해 콘크리트의 미세 공극 구조의 변화 및 중성화와 염소이온 투 과의 상호 화학반응이 직접 지배방정식 형태로 고려된 최신 모델을 사용하여 이 복합작용의 분석을 수행하였다. 이산화탄소, 염소이온, 열 및 수분의 복합적인 이동이 직접 고려되었다. 문헌상의 실험 데이터를 분석하여 모델의 입력변수를 결정하고 계산의 편의성을 증진시켰다. 이 모 델을 상용유한요소 프로그램인 COMSOL의 사용자 모듈형태로 개발 하였다. 이 상호작용에 영향을 미치는 물-바인더비 (w/b), 골재-바인더비 (a/b), 플라이에쉬 함량, CSH 함량, 콘크리트 초기공극률 등을 정량적으로 분석하였다. 결과에 의하면, 중성화와 염소이온 침투의 상호작용은 다양한 재료 물성치에 영향을 받는다.

In this research we carried out the compressive strength, modulus of rupture and scaling resistance tests in order to evaluate the durability of concrete pavement containing waste glass powder. As a results of this research, the concretes incorporating 20% waste glass powder had higher compressive strengths and modulus of ruptures than the concretes with 20% fly-ash. Also, they had a better scaling resistance than ordinary portland cement concretes and fly ash concretes.

In this paper, we investigate the pozzolanic reaction of the waste glass sludge incorporating precipitation additives experimentally. The consumption of calcium hydroxide, and the compressive strength were tested for two different types of the waste glass sludge depending on whether precipitation additives were used.

Elasto-plastic buckling strength is evaluated based on the procedure given by DNV-RP-C208. To calculate the safety margin of an irregular-shaped steel plates, usage factor in DNV-RP-C201 is modified then used.

In this research, we carried out design and analysis with joint of concrete supporting structure for offshore wind energy. We developed load transfer mechanism about applied load induced from steel tower to concrete foundation. Also, a commercially available finite element program, ABAQUS 6.10, is used to analyze behavior of structure.

We studied design and structural analysis of jack-up barge footing system that can be safely and quickly installed offshore support structure. In this paper, we checked the buckling strength for a structural member in spudcan based on DNV-RP-C201

In this research, We investigate evaluation on properties of mortars incorporated with waste LCD glass. LCD glass was grinded at 2,500, 3,500, 4,500 cm2/g blaine to replace 20% wt of cement. The compressive strength and Alkali-silica reaction test was carried out to verify effect of finess of LCD glass.

TLP (Tension Leg Platform) is the marine structure for the buckling evaluated to ensure the safety. ABAQUS program was conducted the buckling of TLP. A global model which simulated entire TLP structure has too many elements. This leads a large consumption of time and the hardware for analysis. Therefore, dividing the global model into the detailed models and the local models are significant. In this study, the buckling strength evaluation of the TLP structure members was proceed via non linear finite element analysis presented in DNV-RP-C208.

In this research, we used half model instead of full model in order to consider convergence and analysis running time. We carried out nonlinear analysis on the joints between steel tower to concrete supporting structure of the 5MW offshore wind turbine applying only half of the load on the joint.

In this research, We carried out compressive, chloride ion penetration and scaling, freezing-thawing test. These test will evaluate the durability of Waste Glass Powder(WG) and Sludge(WGS) concrete. In result, the compressive strength of containing WG, WGS increased rather than OPC in age 90 days. Also, resistance of chloride ion penetration and scaling, freezing-thawing confirmed excellent rather than OPC.

Waste glass powder is efficient materials as a Supplementary Cement Materials(SCM). Recently, A number of waste glass have been occurred in glass-industry as by-products. However, almost previous research were deal with bottles, glass containers. Therefore, X-ray diffraction and thermogravimetric analysis was carried out to evaluate pozzolan reaction of various waste glass samples. Pozzolan reaction of Waste Glass Sludge(WGS) was more faster than the other waste glass samples, especially in early stage.

TLP is an offshore structure which should be tested for the buckling strength for safety. In this paper, DNV-RP-C208 are used to analyze a stress resultant of buckling phenomenon for complicated structures by using nonlinear finite element methods.

In this paper, we present requirements for the spudcan footing of jack-up barges, we take a survey about jack-up barges and their limitation. And by using the result of the survey, we find the failure modes and requirements for design of the footing.

최근 탄소섬유판 매립공법의 콘크리트 구조물의 보강에 적용되고 있다. 그러나 탄소섬유판 표면매립공법은 피복부 콘크리트의 강도 부족과 높이 부족 등으로 인하여 그 적용의 제한이 발생하기도 한다. 본 연구에서는 이와 같은 이유로 인하여 전단 스터럽을 절단하고 탄소섬유판을 주철근의 위치에 표면매립 보강하는 공법에 대하여 고찰하였다. 일반적인 표면매립공법과 스터럽을 절단하고 표면매립공법을 적용한 보에 대한 휨 실험을 수행하였으며, 결과를 서로 비교하였다. 탄소섬유판의 길이를 실험변수로 하였다. 실험결과에 따르면, 전단 스터럽을 절단한 보강 보의 휨거동은 일반적인 표면매립공법이 적용된 실험체의 거동과 유사한 전형적인 휨 거동을 나타내었으며, 스터럽의 절단으로 인한 구조거동상의 문제는 발생하지 않았다. 따라서, 일반적인 현장 여건에 의하여 탄소섬유판의 적용이 곤란한 경우에는 스터럽을 절단하는 본 공법의 적용이 가능한 것으로 판단된다.

Time dependent material characteristics of concrete affects serviceability and safety due to long term deformation of concrete. Thus, in this paper, the long term behavior of a precast modular bridge by using ACI 209R-92, B3, CEB MC90-99, considering the most influenced factors: creep and shrinkage.

The object of this research is to confirm the effect of Waste Glass Sludge on properties of concrete through compressive strength and Alkali-Silica reaction of concrete and to develop as construction material.

This study proposed a hybrid floating structure which is expected to have better structural behavior than general pontoon type structure. Using structural analysis, the performance of the structure was investigated. We tried to find the optimal system of this hybrid floating structure system.