Pyrochemical processing and molten-salt reactors have recently garnered significant attention as they are promising options for future nuclear technologies, such as those for recycling spent nuclear fuels and the next generation of nuclear reactors. Both of these technologies require the use of high-temperature molten salt. To implement these technologies, one must understand the electrochemical behavior of fission products in molten salts, lanthanides, and actinides. In this study, a rotating-disk-electrode (RDE) measurement system for high-temperature molten salts is constructed and tested by investigating the electrochemical reactions of Sm3+ in LiCl–KCl melts. The results show that the reduction of Sm3+ presents the Levich behavior in LiCl–KCl melts. Using the RDE system, not only is the diffusion-layer thickness of Sm3+ measured in high-temperature molten salts but also various electrochemical parameters for Sm3+ in LiCl–KCl melts, including the diffusion coefficient, Tafel slope, and exchange current density, are determined.

Most of the C-14 produced is in the organic form, generated as methane (14CH4), methanol (14CH3OH), formaldehyde (14CH2O), and formic acid (14CO2H2). When analyzing C-14, it is transformed into the form of 14CO2, and its concentration is determined using LSC. Typical examples include the wet oxidation method, the combustion or Pyrolysis. The wet oxidation method uses strong acids and involves repeated operations, which generates large amounts of acid waste and secondary radioactive waste. The combustion method uses high temperatures, which requires an oxygen device. Pyrolysis also requires high temperature in a vacuum and catalysts. Catalysts are expensive because they are platinum-based. To compensate for these shortcomings, a C-14 analysis method using UV irradiation was developed. In this study, 100 mL of distilled water mixed with formic acid (CO2H2), potassium persulfate (K2S2O8), and silver nitrate (AgNO3) was irradiated with a 320-390 nm UV lamp to conduct a CO2 production reaction experiment. The UV range was measured using a photometer (UV Power puck II). The beaker was made of quartz in 150 mL size with three inlets : a temperature measurement, a sample inlet, and a collection tube connector. We changed the UV lamp used from a 450 W halogen lamp to a 100 W LED, which has a lower temperature and is safer. As a result of the experiment, CO2 bubbles were generated in the collection tube, due to the UV irradiation react, which uses oxidizer and catalysts. The maximum temperature of the solution irradiated with the LED UV lamp was less than 56°C. It confirmed the rate of bubble generation changed depending on the lamp distance, the amount of sample, oxidizer, and catalyst. In an experiment to confirm the reaction caused by heat, it was found that although a reaction occurred due to heat, the reaction was significantly lower than when using a UV lamp. The reproducibility experiment was conducted three times in total under the same conditions. It showed the same pattern. In the future, we plan to select mock samples, collect 14CO2 in Carbo- Sorb, and analyze them using LSC. The results of this research will be used as a technology to recover C-14 more safely and efficiently and will also be used to expand its application to the treatment of other wastes such as waste liquid and waste resin through simulated samples.

The density of molten salts is the most important property in the development of molten salt reactor (MSR). The density value measured through the experiment is also very valuable as a gold standard for the validation of the prediction models based on molecular dynamics or other computational methods. To the best of our knowledge, the experimental density data of the ternary NaCl-MgCl2- UCl3 salt system as a MSR candidate fuel salt have never been reported previously. In this study, density measurement experiment of high-temperature molten salt of NaCl-MgCl2 and NaCl-MgCl2- UCl3 was conducted using a previously-developed density measurement system based on the maximum bubble pressure (MPB) method. As a result of the experiment, the density value of 62NaCl- 18MgCl2-20UCl3 molten salt at 873 K was 2.62 g/cm3. A density prediction value of 2.65 g/cm3 at 873 K was derived from the obtained results based on the rule of additivity of molar volume method. The predictred density of 62NaCl-18MgCl2-20UCl3 was consistent with the experimental value within 1%. The density measuring system used in this study is promising for the validation of other multicomponent molten salt systems.

Viscosity of molten salts is an essential property for the thermal hydraulic design and evaluation of molten salt reactor (MSR). Therefore, viscosity data is one of the fundamental physical property data required for safe process operation and countermeasures to severe accidents. In this study, based on our experience of developing a viscosity measurement system for high-temperature LiCl-KCl molten salt system, the viscosity of NaCl-MgCl2 and NaCl-MgCl2-UCl3 molten salts, which are considered promising salts in MSR, was measured. In order to investigate the physical properties of uranium in high-temperature NaCl-MgCl2 molten salt, a viscometer system for high-temperature viscosity measurement was specially designed. As a result of the measurement, the viscosity of the 58NaCl- 42MgCl2 molten salt was 2.73 cP at 838 K, 2.15 cP at 889 K, and 1.68 cP at 940 K. And the viscosity of 73NaCl-21MgCl2-6UCl3 molten salt was 3.79 cP at 877 K, 3.58 cP at 897 K, and 1.63 cP at 941 K. The repeatability of the measurement showed a precision of less than 3%. Although sufficientlyverified starting materials were not used, viscosity data were reported for the first time for NaCl- MgCl2-UCl3 molten salts.

Molten salts have gained significant attention as a potential medium for heat transfer or energy storage and as liquid nuclear fuel, owing to their superior thermal properties. Various fluoride- and chloride-based salts are being explored as potential liquid fuels for several types of molten salt reactors (MSRs). Among these, chloride-based salts have recently received attention in MSR development due to their high solubility in actinides, which has the potential to increase fuel burnup and reduce nuclear water production. Accurate knowledge of the thermal physical properties of molten salts, such as density, viscosity, thermal conductivity, and heat capacity, is critical for the design, licensing, and operation of MSRs. Various experimental techniques have been used to determine the thermal properties of molten salts, and more recently, computational methods such as molecular dynamics simulations have also been utilized to predict these properties. However, information on the thermal physical properties of salts containing actinides is still limited and unreliable. In this study, we analyzed the available thermal physical property database of chloride salts to develop accurate models and simulations that can predict the behavior of molten salts under various operating conditions. Furthermore, we conducted experiments to improve our understanding of the behavior of molten salts. The results of this study are expected to contribute to the development of safer and more efficient MSRs.

Disposal of radioactive waste requires radiological characterization. Carbon-14 (C-14) is a volatile radionuclide with a long half-life, and it is one of the important radionuclides in a radioactive waste management. For the accurate liquid scintillation counter (LSC) analysis of a pure beta-emitting C-14, it should be separated from other beta emitters after extracted from the radioactive wastes since the LSC spectrum signals from C-14 overlaps with those from other beta-emitting nuclides in the extracted solutions. There have been three representative separation methods for the analysis of volatile C-14 such as acid digestion, wet oxidation, and pyrolysis. Each method has its own pros and cons. For example, the acid digestion method is easily accessible, but it involves the use of strong acids and generates large amount of secondary wastes. Moreover, it requires additional time-consuming purification steps and the skillful operators. In this study, more efficient and environment-friendly C-14 analysis method was suggested by adopting the photochemical reactions via in-situ decomposition using UV light source. As an initial step for the demonstration of the feasibility of the proposed method, instead of using radioactive C-14 standards, non-radioactive inorganic and organic standards were investigated to evaluate the recovery of carbon as a preliminary study. These standards were oxidized with chemical oxidants such as H2O2 or K2S2O8 under UV irradiations, and the generated CO2 was collected in Carbo-Sorb E solution. Recovery yield of carbon was measured based on the gravimetric method. As an advanced oxidation process, our photocatalytic oxidation will be promising as a time-saving method with less secondary wastes for the quantitative C-14 analysis in low-level radioactive wastes.

Molten salt reactor (MSR) is one of the non-pressurized-water fourth-generation reactors that uses liquid nuclear fuel that integrates coolant and nuclear fuel, so it is a safe reactor that can fundamentally prevent severe accidents caused by coolant loss. MSR uses NaCl-MgCl2 as a coolant salt, which is considered a promising diluent that can dissolve the fuel salt by forming an eutectic mixture. In this study, a zone-melting system was used to remove impurities from the NaCl-MgCl2 used in MSR. The system was designed in detail to control eutectic salt impurities by traversing long charges into a small molten zone.