We introduce the Transformable Reflective Telescope (TRT) kit that applies an aluminum profile as a base plate for precise, stable, and lightweight optical system. It has been utilized for optical surface measurements, developing alignment and baffle systems, observing celestial objects, and various educational purposes through Research & Education projects. We upgraded the TRT kit using the aluminum profile and truss and isogrid structures for a high-end optical test device that can be used for prototyping of precision telescopes or satellite optical systems. Thanks to the substantial aluminum profile and lightweight design, mechanical deformation by self-weight is reduced to maximum 67.5 μm, which is an acceptable misalignment error compared to its tolerance limits. From the analysis results of non-linear vibration simulations, we have verified that the kit survives in harsh vibration environments. The primary mirror and secondary mirror modules are precisely aligned within 50 μm positioning error using the high accuracy surface finished aluminum profile and optomechanical parts. The cross laser module helps to align the secondary mirror to fine-tune the optical system. The TRT kit with the precision aluminum mirror guarantees high quality optical performance of 5.53 μm Full Width at Half Maximum (FWHM) at the field center.

COVID-19 대유행으로 인해 병원, 진료소, 검역소 및 의료 연구 기관을 포함한 의료 시설에서 매일 수많은 의료 폐기물이 발생함에 따라 의료폐기물 처리가 심각한 문제가 되고 있다. 이전에는 전통적인 소각방법이 사용되었지만 매립지 부족 및 관련 환경 문제로 인 해 공중 보건이 위험에 처해 있다. 이런 문제를 극복하기 위해 멸균분쇄용 파쇄기를 개발하였다. 본 연구에서는 유해 및 감염성 의료폐 기물에 대한 작동 성능을 결정하기 위해 분쇄용 파쇄 시스템의 설계 및 수치해석을 수행하였다. 파쇄기의 부품은 CAD 소프트웨어를 이용하여 모델링하였으며, ABAQUS를 사용하여 유한요소해석을 수행하였다. 정적, 동적 및 피로하중 조건 하에서 파쇄기 절단 날의 해석을 수행하였으며, 의료 폐기물을 분쇄하는데 필요한 절단력을 기반으로 절단 날의 형상이 효과적임을 입증하였다. 모달 해석을 통해 구조물의 동적 안정성을 검증하였다. 또한, 절단 날의 수명을 예측하기 위해 고주기 피로해석을 통해 S-N 선도를 생성하였다. 이 를 통해 적절한 분쇄용 파쇄 시스템이 멸균 장치와 통합되도록 설계하여 의료 폐기물의 양과 처리 시간을 줄임으로써 환경 문제와 잠 재적인 건강 위험을 극복하는 방안을 제시하였다.

Even in an era where 8-meter class telescopes are common, small telescopes are considered very valuable research facilities since they are available for rapid follow-up or long term monitoring observations. To maximize the usefulness of small telescopes in Korea, we established the SomangNet, a network of 0.4{1.0 m class optical telescopes operated by Korean institutions, in 2020. Here, we give an overview of the project, describing the current participating telescopes, its scientic scope and operation mode, and the prospects for future activities. SomangNet currently includes 10 telescopes that are located in Australia, USA, and Chile as well as in Korea. The operation of many of these telescopes currently relies on operators, and we plan to upgrade them for remote or robotic operation. The latest SomangNet science projects include monitoring and follow-up observational studies of galaxies, supernovae, active galactic nuclei, symbiotic stars, solar system objects, neutrino/gravitational-wave sources, and exoplanets.

Hard Shoulder Running is one of the ways to handle road traffic by installing LCS signals on the shoulder, making use of the shoulder as a straight road during rush hour, and thereby increasing the capacity of the road in the short term. Since it was first introduced on Youngdong Expressway in September 2007, it has been implemented in 32 highway sections and has improved the speed of traffic. The Seoul-Chuncheon Expressway, which is a private investment toll road, introduced Hard Shoulder Running only for some sections in 2014, but due to the geomorphic characteristics of the lanes with many tunnel sections, It did not perform the function of Hard Shoulder Running. Therefore, they are considering expanding the tunnel section of Hard Shoulder Running, and it is necessary to examine the safety of the tunnel part to implement this. The purpose of this study is to investigate the effect of the change of geometry, such as reduction of lane width in tunnels, and the installation of various guiding facilities, on the safety of tunnels by applying a driving simulator. Virtual reality data were constructed at 3.25m and 3.0m respectively in the tunnel section of the Seongjong Tunnel of Seoul-Chuncheon Expressway and Geumnam Tunnel to determine the feasibility of Hard Shoulder Running and appropriate speed and lane width. EEG was used for analysis. The test subjects were 15 young drivers / 15 old drivers. Analysis items were classified into four categories: driving speed, steering wheel operation, lateral placement of vehicle, and driver's psychological factors. As a result of analysis of the experimental results, it was confirmed that the allowance width of outer wall and m of tunnels was secured, and the lane width of 3.0 m was stable in terms of driver driving behavior, and operation speed was lower than 50 km/h.

For purposes of studying intron structures and predicting consensus splice motifs, a total of 102 legume species were used to isolate introns across the family. Of 196 gene-targeted PCR primer pairs, we successfully amplified 118 intron-containing genes (60.2%) and obtained a total of 1,870 introns with an average size of 143 nucleotides. Species-based compilation of 5’- and 3’-splicing motifs showed lineage-specific conservation in each splicing motif. Compilation of the entire intron set permitted prediction of the consensus sequences of splicing signal motifs in legumes, AYGWGTABABGH and TVNC/TAGGHTV for the 5’- and 3’-splicing motifs, respectively. Interestingly, these consensus motifs are very similar to the corresponding splicing signals of two model systems, Arabidopsis and rice. This result is suggestive of conservation of pre-mRNA splicing mechanisms in higher plants. Multiple alignments of CALTL introns demonstrated that the region from the branch point to 3’ splice site was relatively more conserved than the region from5’ splice site to the branch point. Phylogenetic analysis demonstrated that each of three splicing motifs, 5’-splice sites, 3’-splice sits, and branch site, was relevant to evolutionary divergence of species and phylogenetically informative, suggesting that splice signal sequences would be useful as a potential tool for the molecular phylogenetic analysis.