KORAD (Korea Radioactive Waste Agency, http://www.korad.or.kr) has stored slightly contaminated ascon (asphalt coated concrete mixture) that was introduced to Gyeongju repository about a decade ago waiting for a final disposal. It is believed to be mainly contaminated by radioisotope 137Cs due to impurities introduced from the outside during the ascon manufacturing process. We studied characteristics of the radioactive waste to see whether this material would be proper enough to be disposed in Gyeongju LILW repository or be other ways to reduce the disposal volume including self-disposal before its final disposal otherwise. KORAD looked into the properness of characteristics of ascon in terms of WAC (Waste Acceptance Criteria) documented by KORAD that includes general chemical and physical properties of asphalt, density, size of grains, content of organic material and possibility of existence of chelate materials that qualitatively limited to be disposed by the criteria. And other associated characteristics such as gas generation and bio degradation were also investigated. Based on the data obtained from the study, we proposed various plausible solutions in associated with operational and disposal safety and economic view points. This study will be used for KORAD’s decision on how to control and safely dispose the spent ascon within a reasonable time period. And also those experiences may be applied for other LILW issues that require treatment or conditioning of radioactive wastes in the future.

The decommissioning of nuclear facilities produces various types of radiologically contaminated waste. In addition, dismantlement activities, including cutting, packing, and clean-up at the facility site, result in secondary radioactive waste such as filters, resin, plastic, and clothing. Determining of the radionuclide content of this waste is an important step for the determination of a suitable management strategy including classification and disposal. In this work, we radiochemically characterized the radionuclide activities of filters used during the decommissioning of Korea Research Reactors (KRRs) 1 and 2. The results indicate that the filter samples contained mainly 3H (500–3,600 Bq·g−1), 14C (7.5–29 Bq·g−1), 55Fe (1.1– 7.1 Bq·g−1), 59Ni (0.60–1.0 Bq·g−1), 60Co (0.74–70 Bq·g−1), 63Ni (0.60–94 Bq·g−1), 90Sr (0.25–5.0 Bq·g−1), 137Cs (0.64–8.7 Bq·g−1), and 152Eu (0.19–2.9) Bq·g−1. In addition, the gross alpha radioactivity of the samples was measured to be between 0.32–1.1 Bq·g−1. The radionuclide concentrations were below the concentration limit stated in the low- and intermediatelevel waste acceptance criteria of the Nuclear Safety and Security Commission, and used for the disposal of the KRRs waste drums to a repository site.

Upgraded activated carbons (ACs) are typically synthesized by mixed methods, such as solid–solid mixing and wet impregnation of low-grade ACs with KOH. This study compares the properties of upgraded ACs prepared by different methods using elemental analysis, X-ray photoelectron spectroscopy, N2 adsorption isotherms, and X-ray diffraction. In ACs produced by the solid–solid mixing, the ratio of potassium activator is proportional to the surface area and amount of gas produced. However, in wet impregnated ACs, the potassium ratio exhibits a zero or negative correlation. It is demonstrated that potassium ions in solution are not transferred to K2O and do not contribute to the surface area and pore size, generating less amount and different composition of gases. As such, impregnated ACs exhibit similar surface areas and large pores, regardless of the potassium ratio. The physical properties, such as specific surface areas and pore size distribution, of ACs using wet impregnation were similar to the ACs generated by the water physical activation. It indicated that the KOH does not efficiently act as a chemical activator in the wet impregnation method. Therefore, a certain amount and suitable mixing method of chemical activator play an important role in the property upgrade of ACs.