Minuartia laricina (L.) Mattf. is a Korean native plant with high potential as a commercial flowering potted plant due to its compactness and long flowering duration. However, because this plant is a groundcover, it is susceptible to lodging and leggy growth. Therefore, this study investigated the effects of plant growth retardants (PGRs) on the inhibition of stem elongation and flowering characteristics of M. laricina. Commercial products, Trimmit, Cycocel, and B-Nine, were used for the exogenous PGR application of paclobutrazol (PBZ), chlormequat chloride (CCC), and daminozide (DMZ), respectively. Application concentrations were 50 and 100 mg·L-1 for PBZ; 100, 500, and 1,000 mg･L-1 for CCC; and 500, 1,000, and 2,000 mg·L-1 for DMZ. Paclobutrazol was the only PGR that inhibited stem elongation. The stem lengths of the plants treated with 50 or 100 mg·L-1 PBZ were 2.2 cm (13%) or 9.8 cm (57%) shorter, respectively, than those of the control. 50 mg·L-1 PBZ retarded stem growth effectively without negatively affecting flowering or other growth parameters, whereas 100 mg·L-1 PBZ caused excessive dwarfing and significantly reduced flowering by 59%. CCC and DMZ applications were ineffective for growth control. Flowering time was accelerated with most PGRs, except for 2,000 mg·L-1 DMZ, reducing the time to flowering by 2–8 days. These results indicate that the stem growth of M. laricina was successfully inhibited with PBZ but not with CCC or DMZ. Thus, we concluded that a single application of 50 mg·L-1 PBZ or similar treatment is effective in miniaturizing M. laricina without causing harm to its growth or aesthetic value, such as the flower number. Additionally, because CCC and DMZ are not persistent in the growing medium, testing multiple application times for these PGRs is crucial.

Under anoxic conditions, this study investigated removal of dissolved As(III) by Si and Al oxides including natural sand, chemically washed sand (silica), alumina, and activated alumina. Despite the similar surface area, natural sand showed greater extents of As(III) sorption than chemically washed sand. This was likely due to the high reactivity of Fe(oxyhydr)oxide impurities on the surface of natural sand. For both sands, As(III) sorption was the greatest at pH 7.1, in agreement with the weakly dissociating tendency of arsenous acid. Also, the least sorption was observed at pH 9.6. At basic pH, elevated silicate, which originated from the dissolution of silica in sands, would compete with As(III) for sorption. Due to the highest surface area, activated alumina was found to quantitatively immobilize the initially added As(III) (6.0×10−7 -2.0×10−5 M). Alumina showed As(III) sorption compared to or greater than chemically washed sand, although the former had less than 6% of the surface of area the latter. The greater reactivity of alumina than chemically washed sand can be explained by using the shared charge of oxygen.

목적: 상분리가 일어나지 않는 실리콘하이드로겔 콘택트렌즈(silicone hydrogel contact lens, SH-CL) 제조에 적합한 실리콘 모노머의 구조를 알아보고자 한다. 방법 : HEMA(2-hydroxyethyl methacrylate)와 세 종류의 실리콘 모노머, TRIM[3-(trimethoxysilyl)propyl methacrylate, Aldrich], TEMA[2-(trimethylsilyloxy)ethyl methacrylate, TCI], TMMA[(trimethylsilyl) methacrylate, Aldrich]를 활용하여 완전몰드로 SH-CL를 제조하였다. 함수율과 UV-VIS spectrophotomter 를 이용한 광투과율, TGA 분석을 통한 열적안정성 등의 물리적 특성과 FT-IR 분석을 통한 화학적 특성을 알아 보았다. 결과 : 동일한 양의 TRIM, TEMA, TMMA를 사용하여 제작한 SH-CL의 광투과율은 각각 92%, 86%, 80%로 측정되었으며, 함수율은 TRIM을 사용한 SH-CL에서 39.3%로 가장 높게 나타났다. FT-IR 분석 결과 세 종류의 SH-CL 모두 silicone monomer와 HEMA의 중합반응이 잘 이루어졌음을 확인할 수 있었고, TGA 분석을 통해 TRIM monomer의 sol-gel 반응 유무를 확인할 수 있었다. 결론 : Sol-gel 반응에 적합한 구조를 가지고 있어 상분리가 일어나지 않아 투명하고, Si에 극성 작용기인 methoxy기가 연결되어 있는 TRIM monomer가 SH-CL 제조에 적합한 구조임을 확인할 수 있었다.

The present study examined the receptive and productive knowledge of collocations of second language (L2) and heritage speakers of Korean and also investigated the influence of phrasal frequency, exposure to Korean, and phonological short-term memory (PSTM). Seventeen L2 learners and 14 heritage speakers of Korean were tested on 30 Korean noun-verb collocations, which varied in phrasal frequency, using an acceptability judgment task and a collocation completion test. The results showed that both L2 and heritage speakers demonstrated considerable receptive knowledge of Korean collocations while productive knowledge was more limited for both groups. The mixed-effects modelling results of four independent variables of interest (i.e., phrasal frequency, exposure via media, academic use, and PSTM) showed that phrasal frequency was the only significant predictor of receptive knowledge of collocations for both L2 and heritage speakers; none of the four factors had a significant impact on productive knowledge of collocations for either group. These data are discussed in relation to previous studies on collocation development of L2 learners and heritage speakers.

At high temperatures, molten salt has heat transfer properties like water. Molten salt has the characteristics of a strong natural circulation tendency, large heat capacity, and low thermal conductivity. Unlike sodium, molten salt does not react explosively exothermically with air. However, molten salt has a strong tendency to corrode materials, and its properties are easily changed by a sensitive reaction to oxygen and moisture. Therefore, it is necessary to study material corrosion properties and chemical control methods for nuclear fuel salts, which are eutectic mixtures. In this study, the optimal operation method of the thermal convection loop is established to perform the experiments on the molten salt. The process describes briefly as follows. The operation step consists of preparation, purification, transportation, and operation. In the preparation, the step checks the entire structure and equipment (TC, blower, vacuum pump, etc.). And melt the salt mixture at a high temperature (670°C) slowly in the purification step. Before injecting the molten salt, the surface temperature of the entire loop must retain temperature (about 500°C) constantly. Completely melted molten salt in the melting pot is flow along the pipe of the thermal convection loop in the transportation step. Lastly, the convection of molten salt goes to keep by the temperature difference. The thermal convection loop can be utilized for various experiments such as corrosion tests, component analyses, chemistry control, etc.

Molten salt used in the multipurpose molten salt experiment must be of high purity. Depending on the purpose of the experiment, only the base component of the molten salt be used, or a component simulating a nuclear fission product be added to the base component and used. In all cases, an increase in the concentration of impurities such as oxygen and moisture may lead to an erroneous interpretation when analyzing the experimental results. Therefore, molten salt should be purified before use. In this study, the purification of molten salt is described for multi-purpose molten salt experiments. The salt mixture is selected as MgCl2-NaCl and is quantified at a mixing ratio of 43mol%:57mol%. The salt mixture is treated in a glove box environment because of must minimize the reaction of adsorbing oxygen and moisture when the salt mixture is exposed to the atmosphere. MgCl2 is more likely to contain water than NaCl, the purification of the NaCl-MgCl2 mixture is established according to the purification process for removing water from MgCl2. A process for purifying the salt mixture briefly consists as follows: drying moisture, melting salts, purification, removing HCl, and stabilization. Through the process be able to obtain high-purity molten salt and more accurate experiment results.

Forest fires produce various particulate organic matters (POMs) derived from the incomplete combution process of biomass. The POMs deposited in soil and sediments can affect the physicochemical properties of the subsurface environments. This study investigated the sorption and transport behavior of cesium (Cs) in soil-groundwater environment after wildfire. Soil samples were collected at two locations (GS1 & GS2) in Gangwon Province, Korea, at different depths (~5, ~20, and ~40 cm). The sampling site, where a large-scale forest fire occurred in 2017, was damaged almost 252 ha of forest. The soil characteristics were determined by X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM), total organic carbon (TOC) analysis and organic petrography, and batch and fixed-bed column experiments were performed to evaluate the Cs uptake and retardation. The XRD patterns of the soils indicated that the mineral compositions of soils were quartz, feldspars (e.g., orthoclase & albite) with minor muscovite/illite. Quartz and feldspars were abundant in all studied soils, and GS2 sample contained higher feldspars and phyllosilicate minerals than the GS1. The TOC contents were high (7–8wt%) in the topsoils, decreasing with depth. The SEM and organic petrographic analyses showed that various organic carbon particles such as textinite, ulminite, fusinite (charcoal) and char existed. Presence of charcoal and char is the evidence of wildfires, even though their amount was few. Batch sorption experiments revealed that the Kd value decreased non-linearly as the Cs concentrations increased, and the sorption isotherms were fitted well with the Freundlich model. The Kd values of each soil were much greater in topsoils compared to subsoils at all experimental Cs concentrations. In particular, the GS1 topsoil had higher sorption capacity for cesium than GS2 subsoils, although it had low phyllosilicate mineral contents with realtively rich organic matter. The breakthrough curve of column experiments with high concentration (C0 ≈ 1×105 μg·L−1) also exhibited remarkable Cs retardation phenomena in topsoils. Their retardation factors (Rf,Cs) were max. 4 times greater than those of subsoils, showing Rf,Cs ≈ 43 to 45 for topsoils. At low concentration (C0 ≈ 1×104 μg·L−1), the Rf,Cs of topsoils (≈ 284 to 374) was slightly greater than that of subsoils (≈ 270 to 271). These results imply that POMs caused by wildfires can play important role on the Cs sorption and transport in the subsurface environments.

The radwaste facility management team is preparing for clearance of 4 MCAs in The Radwaste Form Test Facility (RFTF). The targeted waste was used for clearance level radioactive waste sample analysis and has been used for this purpose since the early 2000s. Due to the characteristics of clearance level radioactive waste, the concentration of radioactivity is very low and MCA is used with Marinelli beakers the possibility of contamination is low. Moreover, the radiation detector should not be contaminated with radioactive materials, it should be less than the clearance level. These detectors were considered surface contamination materials. To detect the contaminated spot of each material, we scanned the whole surface of a material with a gamma survey meter. After that, we took a sample from 1×1 m2 and a total of 30 samples from each MCA. The wiped filter paper was analyzed with alpha, beta low background counting systems. The results of the analysis of the smear sample of total alpha and beta nuclide radioactivity were less than MDA (α: 2.88×10−5 Bq·cm−2, β: 3.07×10−5 Bq·cm−2). The major nuclide in this facility is Co-60 and Cs-137 therefore we analyzed gamma nuclide activity with HPGe. The maximum specific activity was Co-60: 2.31×10−5 Bq·cm−2, Cs-137: 1.96×10−6 Bq·cm−2. If it is satisfied with the clearance criteria, detectors will be reused at the Radioactive Waste Treatment Facility (RWTF) room # 7251 uncontrolled area.

Bayesian statistics, which is an approach to analyzing data based on Bayes’ theorem, is currently widely used in all fields. However, it has been applied very limitedly to studies related to nuclear nonproliferation. Therefore, this paper provides a knowledge base and directions for using various Bayesian techniques in nuclear non-proliferation. First, the concepts and advantages of the Bayesian approach are summarized and the basic solving methods of Bayesian inference are explained. The Bayesian approach enables more precise posterior estimation using the prior probability and the likelihood functions. To solve Bayes’ theorem, it is necessary to use the conjugate prior distribution, which is analytically solvable, or to use a numerical approach with computing power. Next, for several Bayesian statistics methods, the purpose of use and the mathematical derivation process are described. Bayesian linear regression analysis aims for obtaining a function that outputs the closest value to data of variables and results. Factor analysis is mainly used to derive a smaller number of unobserved latent variables that can represent observed variables. The logit and probit model are nonlinear regression models for when the outcome is binary. The hierarchical model is to analyze by introducing hyper-parameters in an integrated manner when there are several groups of similar data. The Bayesian approach of these methods is generally based on the numerical solution of the Bayesian inference of the multivariate normal distribution. Finally, the previous researches that each introduced method have been applied to nuclear non-proliferation are investigated, and research topics that can be applied in the future are suggested. Bayesian statistics have been mainly used for precise estimation of the amount, location, and radioactivity spectrum of nuclear materials using detectors. Using Bayesian approach, it will be possible to perform various analyzes. For example, the change of activeness of nuclear program can be estimated by Bayesian inferences on the frequency and scale of nuclear tests. And it can be tried predicting the production of plutonium according to the core configuration and burnup using the Bayesian linear regression. Also, by introducing the Bayesian approach to factor analysis or logit analysis of nuclear development motives or nuclear proliferation probability, it can be expected to improve precision. With the development of computer technology, the use of Bayesian statistics increases rapidly. Based on the theory and applied topics summarized in this paper, it is expected that Bayesian statistics will be more actively used for nuclear non-proliferation in the future.

In Korea livestock farms breeding cattle have been suffering from re-emerging problems of Brucella (B.) abortus infection while steady decline of bovine brucellosis. Therefore, this study underscored the identification and association of etiological agent of brucellosis in cattle in South Korea. The incidence of brucellosis in cattle was analyzed by bacteriological and molecular methods in 187 brucellosis-suspicious farms of 11 regions between 2018 and 2020. Brucella isolates from various specimens were identified by Brucella-specific multiplex PCR. Epidemiological data were collected by local official veterinarians through history taking from farmers and animal data systems. In 230 of 560 cattle (40.9%) and 94 of 187 farms (50.3%), a total of 313 B. abortus were isolated from various specimens, the majority of isolates were from supramammary lymph node (41%). In epidemiological findings, the majority of positive cases were mainly caused by resurgence (43.7%) and unknown (37.2%). Of 94 positive cases isolated B. abortus, abortion in cattle infected by B. abortus occurred in 51 farms (54.3%) where led to resurgence in 30 farms and environmental survival of B. abortus in 9 farms. Consequently, these findings revealed the existence of etiological agent of bovine brucellosis in Korea, which still occurred at low levels in distinct regions where are allowed to call for persistent biosecurity. Thus, we highlight that brucellosis in Korea needs to take more effective control strategies with potential evidence. Moreover it is ultimately important to maintain a constant monitoring for eradication of brucellosis.

접목선인장은 우리나라 주요 수출 화훼 작목 중 하나이다. 접목선인장은 대부분 선박으로 수출되며 작은 병징만 나타나도 수출에 제약이 많고 경제적 손실도 발생하므로, 접목 과정에서 철저한 소독 과정이 요구된다. 현재 농가에서는 접목 칼을 토치로 소독하고 있으나, 유해가스로 인한 신체적 피해가 발생하고 있어 이를 대체할 소독 방식이 필요하다. 첫번째로 2번의 박테리아 검정 결과, 열탕 15초 소독이 가장 효과적으로 박테리아 증식을 억제하였다. R2A배지 검정 결과, 열탕 15 초 이상부터는 검출되지 않았으며, petrifilm에 분주하였을 때 는 0.33±1.29 CFU/mL이 발생하였다. 두번째로 모의 수송 과정 중 생체중 변화량의 경우, 분홍색 자구의 경우 무처리는 73.07b, 토치 소독은 92.18a, 열탕 15초 소독은 93.29a% initial 로 나타났다(p≤0.05). 세번째로 구경 변화량의 경우, 토치 소독과 열탕 15초 소독 모두 무처리보다 감소폭이 적어 품질 유지를 위해선 소독 과정이 반드시 필요하다고 판단된다. 마지막으로 소독 방식에 따른 최종 부패율은 무처리, 토치 소독, 열탕 15초 소독 각각 27.5±9.01, 28.33±11.55, 16.67±5.77% 가 나타났으므로 열탕 15초 소독이 가장 효과적이다. 따라서 열탕 15초 소독은 관행 소독 방식의 문제점을 해결할 수 있고, 접목 선인장의 품질 향상 및 부패 감소로 농가의 경제적인 이득 또한 향상시킬 수 있을 것으로 기대된다.