To safely dispose of highly radioactive spent resin and concentrate waste generated through nuclear power plant operations, it is essential to meet the physicochemical properties requirements of the packages and ensure the accuracy and reliability of radiological characteristics determination. Both spent resin and concentrate are packaged in high-integrity containers (HICs) after drying and are homogeneous waste products generated in the primary system and liquid radioactive waste treatment system. Meeting the physicochemical properties requirements does not appear to be difficult. However, to achieve reliable radiological characterization of high-integrity container packages, it is necessary to take a representative sample and perform accurate radiological analysis. Therefore, this paper discusses the methodology for evaluating the radionuclide inventory of high radioactive resin and concentrate packages, as well as the essential element technology and considerations. For relatively high radioactive resin and concentrate packages, the radionuclide inventory for each package should be evaluated with high reliability through direct radiological analysis of the representative samples collected for each package. This can contribute to the efficient operation of radioactive waste disposal facilities. Radionuclide-specific concentrations directly analyzed for each package will be managed in a database. As analytical data accumulates and direct measurements of high-integrity container package such as the radwaste drum assay system (RAS) become feasible, statistical techniques such as correlation analysis between easy-tomeasure (ETM) nuclides and difficult-to-measure (DTM) nuclides can lead to the development of efficient and reasonable indirect evaluation methods, such as scaling factor and the mean activity concentration method. As for the element technology, a remote representative sampling technique should be developed to safely and effectively take representative samples of highly radioactive materials, including granulated or hardened concentrate waste. Considerations should also be given to determining the sample quantity representing each package, as well as establishing radiation calibration and measurement methods appropriate to the radiation levels of the representative samples.

The large rectangular and cylindrical concrete drums are stored in nuclear power plant (NPP) for a long time. At the early stage of NPP operation, the treatment technology of boron concentrates and spent resin was not well developed, when compared to current system. Since the waste acceptance criteria (WAC) of the disposal facility was not established, the boron concentrates and spent resins were packaged in 200 L drum. Some of the 200 L drums, which contain relatively high dose rate radioactive waste, were stored in large concrete drum. The concrete drum offers superior shielding effect and allows reduction of radiation exposure to workers. The WAC requires various characteristics: radiological characteristics, physical characteristics, chemical characteristics, etc. The non-destructive method allows the rapid evaluation and estimation of the concrete structure. Also, it is expected that the large concrete exhibits integrity after the measurements. In this paper, the non-destructive method to understand the large rectangular and cylindrical drum is systematically studied. The advantage and disadvantage of the non-destructive methods were compared in this paper. In addition, the optimized methodology to characterize the radioactive waste containing large rectangular and cylindrical drum will be discussed in this paper.

The segmentation of activated components is considered as a one of the most important processes in decommissioning. The activated components, such as reactor vessel and reactor vessel internals, are exposed to neutron from the nuclear fuel and classified to intermediate, low, and very low-level wastes. As it is expected, the components, which are closed to nuclear fuel, exhibit higher degree of specific activity. After the materials were exposed to neutrons, their original elements transform to other nuclides. The primary nuclides in activated stainless steel are 55Fe, 63,59Ni, 60Co, 54Mn, etc. The previous study indicates that the specific activity of individual nuclide is strongly depends on the material compositions and impurities of the original materials. The 59Co is the one of the most important impurities in stainless steel and carbon steel. In this paper, the relationship between individual nuclides in activation analysis of activated components was studied. The systematic study on specific activity of primary nuclides will be discussed in this paper to understand the activation tendency of the components.