The relationship between asphalt mixture and crack resistance is difficult to predict because it is influenced by aggregate particle size, aggregate and asphalt interface characteristics, rheological properties of asphalt type, asphalt coating thickness, temperature sensitivity and porosity. For this reason, various evaluation methods of crack resistance have been developed. In Korea, indirect tensile strength and toughness are used as criteria for crack resistance test of asphalt mixture. DC (T), SCB, Fenix test, and OT (overlay test) have been developed and used internationally as crack resistance test methods. In this study, we compared the conventional crack resistance evaluation methods, and developed a direct tensile fatigue test method which was modified with OT method and Fenix method. Crack resistances were evaluated using reclaimed asphalt pavements (RAP) and virgin asphalt mixtures. As a result, direct tensile fatigue test method was evaluated as suitable for evaluation of crack resistance.

PURPOSES :This study proposes standards for rural access road pavement section and thickness design considering existing access road construction conditions; the study also proposes a complementary policy that can be used for design convenience.METHODS:Various literature review and case studies had been performed in terms of rural access road section and thickness design, both domestically and internationally, and this was followed by domestic rural access road field surveys. KPRP and KENLAYER were used to analyze the commonalities and predict the remaining life. Data on real cost is used to select an appropriate construction method through economic analysis.RESULTS:The economic efficiency of concrete pavement (15×15) was the highest in terms of economic efficiency of performance life and traffic volume. In the case of asphalt pavement, it is considered that the most economical method is to implement micro-surfacing method four times as a preventive maintenance method (once every 10 years and 4.5 years for asphalt concrete pavement and MS construction method, respectively). Repairable asphalt pavement is advantageous for areas where heavy vehicles are expected to pass. In the case of other general areas, it is considered economical to place concrete (15×15) pavement. However, as analytical results on its performance life are unavailable, it is to be considered for study in the future.CONCLUSIONS :This study proposed interim design guidelines based on various domestic and international design guidelines and case studies. However, in order to develop the final design criteria applicable to the field, it is necessary to (a) estimate the bearing capacity of the lower level of the pavement at various sites, (b) estimate the daily traffic volume, (c) implement advanced low-cost pavement technologies, and (d) propose maintenance standards and techniques for long-term performance.