The ultrasonic method is an alternative to the conventional route to produce structured carbon materials, offering the advantages of synthesis in a short period of time under room temperature. The main objective of this work is to synthesize a sulfonated mesoporous carbon catalyst from a phenolic resin composed of phloroglucinol and formaldehyde. The synthesis was performed by the soft-template method in an ultrasonic processor and the product was subsequently carbonized and sulfonated for application in the esterification model reaction. Functionalization with sulfuric acid of MCS5-6 h sample brought about a decrease in porosity but simultaneously resulted in the generation of functional groups of an acidic nature. The MCS5-6 h catalyst with a sulfonic density of 1.6 mmol g− 1, surface area of 402 m2 g− 1 and pore diameter of 10.6 nm maintained in mesoporous even after acid treatment. MCS5-6 h showed excellent activity in the esterification reaction with 95% oleic acid conversion. The recyclability of MCS5-6 h was satisfactory during five reaction cycles. The present work addressed a promising alternative for the synthesis of carbon catalysts using ultrasound irradiation, thus providing an alternative with a lower cost of time and energy for large-scale production.

The energy demands of the world have been accelerating drastically because of the technological development, population growth and changing in living conditions for a couple of decades. A number of different techniques, such as batteries and capacitors, were developed in the past to meet the demands, but the gap, especially in energy storage, has been increasing substantially. Among the other energy storage devices, supercapacitors have been advancing rapidly to fill the gap between conventional capacitors and rechargeable batteries. In this study, natural resources such as pistachio and acorn shells were used to produce the activated carbons for electrode applications in a supercapacitor (or an electrical double-layer capacitor— EDLC). The activated carbon was synthesized at two different temperatures of 700 °C and 900 °C to study its effect on porosity and performance in the supercapacitor. The morphology of the activated carbon was studied using scanning electron microscopy (SEM). A solution of tetraethylammonium tetrafluoroborate ( TEABF4)/propylene carbonate (PC) was prepared to utilize in supercapacitor manufacturing. The performance of the EDLC was investigated using cyclic voltammetry (CV) and electrochemical impedance spectroscopy. Activated carbons from both the pistachio and acorn shells synthesized at 700 °C in argon gas for two hours exhibited better surface textures and porosity. There activated carbons also exhibited more capacitor-like behavior and lower real impedances, indicating that they would have superior performance compared to the activated carbons obtained at 900 °C. This study may be used to integrate some of natural resources into high-tech energy storage applications for sustainable developments.

Many insects are able to feed on crucifers despite the presence of a potent activated defense system known as the mustard oil bomb. In damaged tissue, mustard oil glucosides (glucosinolates) are hydrolyzed by the enzyme myrosinase to form toxic mustard oils (isothiocyanates). Here, we analyzed how the the cabbage stem flea beetle Psylliodes chrysocephala, a key pest of oilseed rape, copes with this chemical defense. First, we found that P. chrysocephala prevents the activation of ingested glucosinolates by two different strategies, a) by sequestering glucosinolates and b) by converting glucosinolates to desulfo-glucosinolates. Our next aim was to identify the sulfatase enzyme(s) responsible for the detoxification of glucosinolates in P. chrysocephala. Nine arylsulfatase-like genes were identified in the transcriptome of P. chrysocephala, and five of them showed glucosinolate sulfatase activity upon heterologous expression in Sf9 cells. By using RNAi, we confirmed that PcGSS1 and PcGSS2 are active towards benzenic and indolic glucosinolates in P. chrysocephala adults in vivo. However, in feeding experiments, the proportion of sequestered and desulfated glucosinolates ranged from 26 to 35% which suggests that these strategies alone are likely not sufficient to overcome the chemical plant defense. Indeed, P. chrysocephala additionally conjugates isothiocyanates to glutathione and metabolizes them via the conserved mercapturic acid pathway. In summary, the cabbage stem flea beetle avoids isothiocyanate formation by specialized strategies (sequestration and desulfation), but also relies on a conserved detoxification pathway to prevent toxicity of isothiocyanates.

Pollution of chloride ion-reinforced concrete can trigger active corrosion processes that reduce the useful life of structures. Multifunctional materials used as a counter-electrode by electrochemical techniques have been used to rehabilitate contaminated concrete. Cement-based pastes added to carbonaceous material, fibers or dust, have been used as an anode in the non-destructive Electrochemical Chloride Extraction (ECE) technique. We studied the performance of the addition of Carbon Fiber (CF) in a cement-graphite powder base paste used as an anode in ECE of concretes contaminated with chlorides from the preparation of the mixture. The experimental parameters were: 2.3% of free chlorides, 21 days of ECE application, a Carbon Fiber Volume Fraction (CFVF) of 0.1, 0.3, 0.6, 0.9%, a lithium borate alkaline electrolyte, a current density of 4.0 A / m2 and a cement/graphite ratio of 1.0 for the paste. The efficiency of the ECE in the traditional technique using metal mesh as an anode was 77.6% and for CFVF of 0.9% it was 90.4%, with a tendency to increase to higher percentages of the CFVF in the conductive cement-graphite paste, keeping the pH stable and achieving a homogeneous ECE in the mass of the concrete contaminated with chlorides.

The Korea Astronomy and Space Science Institute plans to develop a coronagraph in collaboration with National Aeronautics and Space Administration (NASA) and to install it on the International Space Station (ISS). The coronagraph is an externally occulted one-stage coronagraph with a field of view from 3 to 15 solar radii. The observation wavelength is approximately 400~nm, where strong Fraunhofer absorption lines from the photosphere experience thermal broadening and Doppler shift through scattering by coronal electrons. Photometric filter observations around this band enable the estimation of 2D electron temperature and electron velocity distribution in the corona. Together with a high time cadence ($<$12~min) of corona images used to determine the geometric and kinematic parameters of coronal mass ejections, the coronagraph will yield the spatial distribution of electron density by measuring the polarized brightness. For the purpose of technical demonstration, we intend to observe the total solar eclipse in August 2017 with the filter system and to perform a stratospheric balloon experiment in 2019 with the engineering model of the coronagraph. The coronagraph is planned to be installed on the ISS in 2021 for addressing a number of questions (e.g., coronal heating and solar wind acceleration) that are both fundamental and practically important in the physics of the solar corona and of the heliosphere.

The “Sipadan and Ligitan” dispute was settled by the ICJ (2002), but its impact on basepoint for baseline and maritime delimitation on the Ambalat remains a contentious issue until now. Since the islands are used as basepoints by Malaysia that results in controversy between Indonesia and Malaysia. This essay will investigate the current situation over Ambalat regarding two basepoints islands for maintaining Equidistance Line in Disputed Area. It will discuss why Malaysia has no right to use the straight baseline or straight archipelagic baseline to connect the basepoints of Sipadan and Ligitan at Sabah and suggest measures to maintain equidistance line in Ambalat.

The graphene oxides (GOs) were tested as a fluorescent quencher in the field of DNA-diagnostics. The various suspensions of GO nanoplates were prepared by changing the synthesis conditions. The suspensions were stable for at least 6 weeks by differing degrees of functionalization of various oxygen-containing groups of atoms. Depending on the properties of GO nanoplates, their fluorescent quenching abilities, which were determined by the amount of the tagged immobilized oligonucleotide, were also changed. GO suspension synthesized at 75 oC of reaction mixture showed the fluorescent quenching of 16.39 nmol/mg, which would be a potential substitution of molecular fluorescent quencher in test-systems for DNAdiagnostics.

A full-scale process has been developed to immobilize fission products that accumulate within the Mark IV electrorefiner (ER) electrolyte at Idaho National Laboratory. ER salt was blended with treatment additives, followed by pressureless consolidation (PC) in a furnace to produce a durable ceramic waste form (CWF). The goal is the development of a process to consolidate actual radioactive ER salt into a form suitable for transportation and disposal.Four batches (300 to 400 kg per batch) of full-scale pre-qualification material preparation runs have been prepared. From these four batches of nonradioactive salt-loaded surrogate material, three full-scale PC trials have been conducted. The first PC test run, established equipment parameters with a basic CWF container design. The second trial included a modified CWF container design, real-time measurement of CWF consolidation, and an audio recording to identify cracking during the CWF cool-down. During the third trial, salt was doped (from the fourth material preparation batch) to create a nonradioactive salt material and to more closely represent actual ER salt. The second and third trials were also used to validate a model developed for the CWF. The CWF model is beneficial for understanding and predicting the physical processes that occur during the heat cycle. This would be particularly useful when the CWF is located in a hot cell, which makes accessing and examining a CWF difficult.

Polarbear is a ground-based experiment located in the Atacama desert of northern Chile. The experiment is designed to measure the Cosmic Microwave Background B-mode polarization at several arcminute resolution. The CMB B-mode polarization on degree angular scales is a unique signature of primordial gravitational waves from cosmic in ation and B-mode signal on sub-degree scales is induced by the gravitational lensing from large-scale structure. Science observations began in early 2012 with an array of 1,274 polarization sensitive antenna-couple Transition Edge Sensor (TES) bolometers at 150 GHz. We published the first CMB-only measurement of the B-mode polarization on sub-degree scales induced by gravitational lensing in December 2013 followed by the first measurement of the B-mode power spectrum on those scales in March 2014. In this proceedings, we review the physics of CMB B-modes and then describe the Polarbear experiment, observations, and recent results.

We present a kinematic study of the parsec-scale radio jet in OJ 287, one of the most studied BL Lac objects, during γ-ray ares, to explore the relation between parsec-scale radio jet activity and γ-ray emission. The 22-GHz light curve of OJ 287 show three obvious are events around 2011 May, 2011 October, and 2012 March. The second radio are occurred during the γ-ray aring period, and the third radio are seemed to precede the γ-ray are by one month. One jet component moved outward with respect to the core component with an apparent superluminal speed (~ 11c) from 2010 November to 2011 November. Then it changed direction, moving apparently inward in 2011 November, when the γ-ray are occurred. The observed apparent inward motion of the jet at 22 GHz could be caused by a new jet component, unresolved at 22 GHz, in the innermost region.

In the tanker industry, there are a lot of uncertain conditions that tanker companies have to deal with.For example, the global financial crisis and economic recession, the increase of bunker fuel prices and global climate change. Such conditions have forced tanker companies to change tankers speed from full speed to slow speed, extra slow speed and super slow speed. Due to such conditions, the objective of this paper is to present a methodology for determining vessel speeds of tankers that minimize the cost of the vessels under such conditions. The four levels of vessel speed in the tanker industry will be investigated and will incorporate a number of uncertain conditions. This will be done by developing a scientific model using a rule-based Bayesian reasoning method. The proposed model has produced 96 rules that can be used as guidance in the decision making process. Such results help tanker companies to determine the appropriate vessel speed to be used in a dynamic operational environmental.

The opening of the Northern Sea Route as an alternative route for transporting cargoes between the Far East and Europe seems highly acceptable by shipping companies due to the great saving in fuel consumption, bunker cost, operating cost, emissions and journey time. This situation will not only affect the maritime business activity in the Straits of Malacca but also, the Malaysian economy in different perspectives when the vessels sail via the Suez Canal and the Indian Ocean are expected to decrease. The objective of this study is to analyse the implication in the opening of the Northern Sea Route on Maritime Sector of the Malaysian economy by using PESTEL analysis. The main scope is focusing more on the Malacca Straits shipping activity by using a number of parameters that have been obtained from Port Klang and Port Klang Authority through a set of questionnaires and interview sessions with industrial experts.