노화란 시간경과에 따라 생체기능의 불가역적인 저하로 치매, 뇌혈관질환, 고혈압, 암 등과 같은 노화관련 질병이 생겨나며, 세포들이 생명력을 잃어가는 일련의 현상이다. 노화로 인한 대표적인 질병은 퇴행성 뇌 질환에 의한 알츠하이머, 치매와 파킨슨병이 있다. 이 병들은 초기의 변화가 두드러지지 않아 조기 진단이 어렵고, 질병의 진행을 막는데 어려움이 있다. 이를 해결할 방법으로 유전자 지표를 개발하는 것이 중요한 과제라 할 수 있는데, 본 연구는 노화 동물모델인 SAMP1 마우스를 대조군인 SAMR1 마우스를 비교하여 노화의 초기단계에 차등 발현하는 유전자를 확인하여 향후 노화와 연관 지표를 발굴하기 위하여 실시되었다. 먼저, 성장단계인 8주령과 노화초기진행단계인 26주령의 뇌 조직에서의 차등발현 유전자를 발굴하고자 cDNA chip 분석을 수행하였고, 신뢰성을 가지고 생물학적 변이를 검출할 수 있는 유전자는 13,939개의 유전자를 발굴하였다. 이들 중 발현이 2-fold 이상 증감하는 유전자들을 조사한 결과, 2,029개의 유전자를 선별할 수 있었다. 또한, 기능별로 분류한 결과 노화가 진행되는 과정에서 총 증가 혹은 감소한 유전자의 개수는 660개였으며, 이 중 노화와 연관성이 높은 유전자는 74개였다. 26주령에 증가양상을 보인 것이 46개, 감소양상을 보인 유전자가 28개로 밝혀졌다. 이를 검증하기 위해 노화와 관련된 유용한 유전자인 Wnt7a, Prkcb, Dgke가 선별되어 real-time qPCR을 수행하였다. 그 결과 Wnt7a 유전자는 노화가 진행됨에 따라 발현양이 급격히 감소하여 노화 초기 단계의 지표로 활용이 가능할 것으로 사료된다. 반면에 Prkcb 유전자는 성장단계의 발현량에는 관계없이 노화초기단계에서 억제됨을 확인하였고, Dgke는 성장단계부터 유전자 발현이 억제되어 노화에 영향을 미칠 것으로 판단된다.

Activated carbon was prepared from pre-carbonized petroleum coke. Textural properties were determined from studies of the adsorption of nitrogen at 77 K and the surface chemistry was obtained using the Fourier-transform infrared spectrometer technique and the Boehm titration process. The adsorption of three aromatic compounds, namely phenol (P), p-nitrophenol (PNP) and benzoic acid (BA) onto APC in aqueous solution was studied in a batch system with respect to contact time, pH, initial concentration of solutes and temperature. Active carbon APC obtained was found to possess a high surface area and a predominantly microporous structure; it also had an acidic surface character. The experimental data fitted the pseudo-second-order kinetic model well; also, the intraparticle diffusion was the only controlling process in determining the adsorption of the three pollutants investigated. The adsorption data fit well with the Langmuir and Freundlich models. The uptake of the three pollutants was found to be strongly dependent on the pH value and the temperature of the solution. Most of the experiments were conducted at pH 7; the pH(PZC) of the active carbon under study was 5.0; the surface of the active carbon was negatively charged. The thermodynamic parameters evaluated for APC revealed that the adsorption of P was spontaneous and exothermic in nature, while PNP and BA showed no-spontaneity of the adsorption process and that process was endothermic in nature.

In this study, the adsorption of toxic pollutants onto cetyltrimethylammonium kaolin (CTAB-Kaolin) is investigated. The organo-kaolin is synthesized by exchanging cetyltrimethylammonium cations (CTAB) with inorganic ions on the surface of kaolin. The chemical analysis, the structural and textural properties of kaolin and CTAB-kaolin were investigated using elemental analysis, FTIR, SEM and adsorption of nitrogen at -196℃. The kinetic adsorption and adsorption capacity of the organo-kaolin towards o-xylene, phenol and Cu(II) ion from aqueous solution was investigated. The kinetic adsorption data of o-xylene, phenol and Cu(II) are in agreement with a second order model. The equilibrium adsorption data were found to fit Langmuir equation. The uptake of o-xylene and phenol from their aqueous solution by kaolin, CTAB-kaolin and activated carbon proceed via physisorption. The removal of Cu(II) ion from water depends on the surface properties of the adsorbent. Onto kaolin, the Cu(II) ions are adsorbed through cation exchange with Na+. For CTAB-kaolin, Cu(II) ions are mainly adsorbed via electrostatic attraction with the counter ions in the electric double layer (Br-), via ion pairing, Cu(II) ions removal by the activated carbon is probably related to the carbon-oxygen groups particularly those of acid type. The adsorption capacities of CTAB-kaolin for the investigated adsorbates are considerably higher compared with those of unmodified kaolin. However, the adsorption capacities of the activated carbons are by far higher than those determined for CTAB-kaolin.

Potassium hydroxide activated carbons were prepared from Egyptian petroleum cokes with different KOH/coke ratios and at different activation temperatures and times. The textural properties were determined by adsorption of nitrogen at -196℃. The adsorption of iodine and methylene blue was also investigated at 30℃. The surface area and the non-micropore volume increased whereas the micropore volume decreased with the increase of the ratio KOH/coke. Also the surface area and porosity increased with the rise of activation temperature from 500 to 800℃. Textural parameter considerably increased with the increase of activation time from 1 to 3 h. Further increasing of activation time from 3 to 4 h was associated with a less pronounced increase in textural parameters. The adsorption of iodine shows the same trend of surface area and porosity change exhibited by nitrogen adsorption, with KOH/coke ratio and temperature of activation. Adsorption of methylene blue follows pseudo-first-order kinetics and its equilibrium adsorption follows Langmuir and D-R models.

Fabrication and investigation of composite made of graphite, SiC, mullite and aluminum as the additive are the aim of this project. Aluminum acts as an anti-oxidant. SiC is a non-metallic anti-oxidant that increases composite strength. Different compositions with influent percents of aluminum have been selected to determine product specifications by XRD, SEM and STA methods. Results show that the composition of 40wt% graphite-20% SiC- 20% mullite-20% aluminum is a more robust and occurs at elevated temperatures than other graphite combustion composites.

Experimental samples were produced with mullite and cordierite powders with SiC. Effects of temperature, atmosphere and additive on the composite properties were investigated by XRD, STA and PSA methods. Results show that samples containing calcinate cordierite and calcinate mullite with SiC baked in air atmosphere have not suitable properties at the temperature range of due to SiC intensive oxidation, while argon atmosphere decrease SiC oxidation. Using as the additive, cordierite phase formation and prevention from SiC oxidation at low temperatures were achieved, leading to the improvement of physical and mechanical properties

Recently, sperm has been used as a vector to carry exogenous genes for the production of transgenic animals. However, the success in cattle is low, due to deficiencies in oocyte activation and sperm decondensation caused by high disulphide bond (S=S) content in mature sperm. This study was carried out to develop an effective method for producing transgenic animals with round spermatids (RS). Two methods of embryo production - electric fusion (EC) or intracyto-plasmic injection (IC) and three activation treatments were compared. RS were isolated from bull testes by Percoll density gradients (20, 35, 40, 45 and 90%). Fusion between ooplast and RS was performed with a single DC electric pulse (1.0 KV/cm, 45 sec) in 0.28 M mannitol solution supplemented with 100 M CaCl2 and 100 M MgCl. (중략)