In this study, the mixing method of positive paste and mixing temperature to improve the capacity of the lead-acid batteries has been investigated. The results show that the initial current capacity of lead acid battery depend on the mixing temperature and mixing method of positive paste. In the results of the capacity cycle repetition tests for estimating the life cycle, the 3BS showed the PCL. but the fine 4BS represented certain improved cycles compared to that of the coarse 4BS. It was considered that the fine 4BS showed higher bond strength between active materials than the coarse 4BS and represented large contact areas and that lead to prevent possible sulfation due to the suppression of insulating layers.

ISG (Idle Stop & Go) 시스템이 적용되는 자동차에 적합한 납축전지를 개발하기 위해 전극 재료인 3BS (3PbO·PbSO4·H2O)와 4BS (4PbO·PbSO4)의 생성조건과 활물질의 화성 방법에 따른 납축전 지 초기 성능과 심방전에 미치는 영향에 대해 연구 하였다. 양극과 음극 활물질을 숙성반응 중 온도 제 어로 최종 생성 활물질의 상이 변하며, 납축전지의 수명에 영향을 미친다는 것을 알 수 있었다. 초기 성 능에는 3BS 활물질을 적용한 AGM 납축전지와 Flooded 납축전지가 우수한 성능을 나타내는 반면 4BS 활물질을 적용한 AGM 납축전지는 상대적으로 낮은 성능을 나타내었다. 또한, 활물질 화성 효율을 비교 분석하기 위해 화성을 3 step과 9 step으로 구분하여 시험한 결과, 3BS로 제작된 AGM 납축전지에 비 해 4BS 활물질을 적용한 AGM 납축전지의 초기 성능이 우수 하였다. DOD17.5% 수명시험으로 수명 성능을 비교한 결과, 잦은 심방전이 요구되는 ISG 시스템에서 Flooded 납축전지는 적합하지 않았으나, AGM 납축전지는 적합한 결과를 나타내었다. 결론적으로 AGM 납축전지가 ISG 시스템 적용 자동차에 적합하였고, AGM 납축전지의 숙성, 화성 방법에 따라 수명 성능이 80% 차이를 나타내는 것으로 확인 되었다.

납축전지 활물질 제작 공정 중 숙성공정에서 온도 제어를 통해 활물질 결정 크기를 제어할 수 있고, 생성된 활물질에 따라 초기 성능 향상, 내구성능 향상 효과를 얻을 수 있었다. 숙성반응 후 생성된 활물 중 3BS는 초기성능에는 유리 하였고, 4BS의 경우 초기 성능은 불리하였으나 내구 성능이 3BS활물질에 비해 48% 향상 되었다. 자동차용 납축전지를 ISG시스템이 적용된 자동차에 사용하기 위해 평가하는 DOD17.5% 수명시험 평가 결과, 일반 자동차 시동용으로 널리 사용하고 있는 Flooded 납축전는 적합하지 않은 것으로 확인 되었고, AGM 납축전지가 적합한 것으로 확인되었다. 그리고 3BS 활물질을 적용한 AGM 납축전지에 비해 4BS 활물질을 적용한 AGM 납축전지가 내구력이 우수하여 ISG 시스템에 적용된 자동차에 적합한 것으로 확인 되었다.

The iron oxides nanoparticles and iron oxide with other compounds are of importance in fields including biomedicine, clinical and bio-sensing applications, corrosion resistance, and magnetic properties of materials, catalyst, and geochemical processes etc. In this work we describe the preparation and investigation of the properties of coated magnetic nanoparticles consisting of the iron oxide core and organic modification of the residue. These fine iron oxide nanoparticles were prepared in air environment by the co-precipitation method using of Fe2+ : Fe3+ where chemical pre- cipitation was achieved by adding ammonia aqueous solution with vigorous stirring. During the synthesis of nanoparti- cles with a narrow size distribution, the techniques of separation and powdering of nanoparticles into rather monodisperse fractions are observed. This is done using controlled precipitation of particles from surfactant stabilized solutions in the form organic components. It is desirable to maintain the particle size within pH range, temperature, solution ratio wherein the particle growth is held at a minimum. The iron oxide nanoparticles can be well dispersed in an aqueous solution were prepared by the mentioned co-precipitation method. Besides the iron oxide nanowires were prepared by using similar method. These iron oxide nanoparticles and nanowires have controlled average size and the obtained products were investigated by X-ray diffraction, FESEM and other methods.

Polyimide is a well-known organic dielectric material, which has not only high chemical and thermal stability but also good electrical insulating and mechanical properties. In this research, the electric conduction mechanism of PI Ultra-Thin Films was investigated at room temperature. At low electric field, ohmic conduction (I∝V) was observed and the calculated electrical conductivity was about 4.23×10-15~9.81×10-15 S/cm. At high electric field, nonohmic conduction (I∝V2) was observed and the conduction mechanism was explained by space charge limited region effect. The dielectric constant of PI Ultra-Thin Films was about 7.0.