Safe geological disposal of spent nuclear fuel (SNF) requires knowledge of the deep hydrochemical characteristics of the repository site. Here, we conducted a set of deep hydrochemical investigations using a 750-m borehole drilled in a model granite system in Wonju, South Korea. A closed investigation system consisting of a double-packer, Waterra pump, flow cell, and water-quality measurement unit was used for in situ water quality measurements and subsequent groundwater sampling. We managed the drilling water labeled with a fluorescein dye using a recycling system that reuses the water discharged from the borehole. We selected the test depths based on the dye concentrations, outflow water quality parameters, borehole logging, and visual inspection of the rock cores. The groundwater pumped up to the surface flowed into the flow cell, where the in situ water quality parameters were measured, and it was then collected for further laboratory measurements. Atmospheric contact was minimized during the entire process. Before hydrochemical measurements and sample collection, pumping was performed to purge the remnant drilling water. This study on a model borehole can serve as a reference for the future development of deep hydrochemical investigation procedures and techniques for siting processes of SNF repositories.

This study examined the effects of micro- (crystallinity) and macro (orientation)-crystalline properties of graphite on the initial efficiency, discharge capacity, and rate performance of anodic materials. Needle coke and regular coke were selected as raw materials and pulverized to 2–25 μm to determine the effects of crystalline properties on particle shape after pulverization. Needle coke with outstanding crystallinity had high initial efficiency, and smaller particles with larger specific surface areas saw increased irreversible capacity due to the formation of SEI layers. Because of cavities existing between crystals, the poorer the crystalline properties were, the greater the capacity of the lithium ions increased. As such, regular coke had a 30 mAh/g higher discharge capacity than that of needle coke. Rate performance was more affected by particle size than by crystalline structure, and was the highest at a particle distribution of 10–15 μm.

Celecoxib, a cyclooxygenase (COX)-2 selective inhibitor, was approved as a non-steroidal anti-inflammatory drug (NSAID), and this therapeutic application has been expanded to several other diseases, including colon cancer. Notably, a treatment strategy combining the use of celecoxib and radiation therapy has been employed for improving the control of local cancers. In this study, we examined the effect of celecoxib on irradiation-induced intestinal damage. The twenty four mice (BALB/c) were divided into four groups; 1) sham-irradiated control group, 2) celecoxib-treated group, 3) irradiated group, and 4) celecoxib-treated irradiation group. Mice were orally administered celecoxib at a dose of 25 mg/kg in a 0.1 mL volume, daily for 4 days after irradiation exposure (10 Gy). Then, histological examinations of the jejunal villous height, crypt survival, and crypt size were performed. The expression of COX-2 after administration of celecoxib in irradiated mice was examined by employing immunohistochemistry, Western blotting, and qPCR analysis. The jejunal villi height and the crypt survival were reduced in the irradiation group compared with the sham-irradiated group. Celecoxib treatment in irradiation mice even more decreased those indicators. Crypt size was increased in the radiation group compared to the sham-irradiated control group, whereas the size was decreased in the celecoxibtreated irradiation group compared with the group exposed to the radiation injury. COX-2 expression was detected in the crypt of the small intestine, and COX-2 expression was increased in the crypt lesion following radiation exposure. However, COX-2 expression was reduced in the celecoxib-treated irradiation group. Therefore, in the present study, we confirmed that celecoxib treatment after irradiation aggravated the irradiation-induced intestinal damage. These results suggest that a caution need to be administered when celecoxib treatment is performed in combination with radiation therapy for cancer treatment.

Continuous synthesis of high-crystalline carbon nanotubes (CNTs) is achieved by reconfiguring the injection part in the reactor that is used in the floating catalyst chemical vapor deposition (FC-CVD) process. The degree of gas mixing is divided into three cases by adjusting the configuration of the injection part: Case 1: most-delayed gas mixing (reference experiment), Case 2: earlier gas mixing than Case 1, Case 3: earliest gas mixing. The optimal synthesis condition is obtained using design of experiment (DOE) in the design of Case 1, and then is applied to the other cases to compare the synthesis results. In all cases, the experiments are performed by varying the timing of gas mixing while keeping the synthesis conditions constant. Production rate (Case 1: 0.63 mg/min, Case 2: 0.68 mg/min, Case 3: 1.29 mg/min) and carbon content (Case 1: 39.6 wt%, Case 2: 57.1 wt%, Case 3: 71.6 wt%) increase as the gas-mixing level increases. The amount of by-products decreases stepwise as the gas-mixing level increases. The IG/ID ratio increases by a factor of 7 from 10.3 (Case 1) to 71.7 (Case 3) as the gas-mixing level increases; a high ratio indicates high-crystalline CNTs. The radial breathing mode (RBM) peak of Raman spectrograph is the narrowest and sharpest in Case 3; this result suggests that the diameter of the synthesized CNTs is the most uniform in Case 3. This study demonstrates the importance of configuration of the injection part of the reactor for CNT synthesis using FC-CVD.