The PRIDE scale mechanical decladder is decladding apparatus for separating and recovering fuel material and cladding hull by horizontally slitting rod-cut. In order to enhance mechanical decladdng efficiency, the main requirements were considered as follows. Decladding of the fuel rods may be performed by rotation of three circular cutting blades inserted among the rollers arranged at 120° portion. In a mechanical decladder, a slitting assembly as a unit for slitting the cladding tube may include cutting blades for slitting and rollers for guiding extrusion of the cladding tube. Rotation of the cutting blades may be caused by the fuel rods being extruded from a plurality of rollers. Slitting intervals of rod-cuts having different diameters may be controlled by adding or removing a spacing plate between the cutting blade and a ranch bolt for fixing the slitting blade to the slitting assembly. An extrusion velocity with respect to the fuel rods may be controlled by a hydraulic pressure applied to the fuel rods. A force for cutting the fuel rods may be adjusted by controlling steel plates. Forces applied to a plurality of rollers may be generated by the hydraulic cylinder. The hydraulic pressure may be controlled by hydraulic pressure controller. The PRIDE scale mechanical decladder mainly consists of auto feeding module, hydraulic cylinder module and blade module. A load cell was installed between the hydraulic cylinder and the extrusion pin to measure the decladding force and slitting velocity, and a data acquisition system capable of obtaining data by using the RSC 232 was constructed. Also, the control panel can control the forward and backward movement of the extrusion pin, the hydraulic flow rate, and the hydraulic velocity. In the mechanical decladding test, 40 pieces of simulated rod-cuts were loaded in two auto feeding basket and slit by utilizing the 3-CUT blade modules in the housing, and hulls and simulated pellets were collected in the collection container. As a result, 80 pieces of simulated rodcut (brass pellets + Zry4 tube) were slit continuously without any problem. About 35 min was required to slit 80 rod-cuts and average decladding force was 260 kg. The decladding force of the ceramic simulated rod-cuts (castable) requires 25 kg less force than the brass pellets. Therefore, it is estimated that the spent fuel rod-cut can be fully split into three pieces using the mechanical decladder.

An important goal of dismantling process is the disassembling of a spent nuclear fuel assembly for the subsequent extraction process. In order to design the rod extractor and cutter, the major requirements were considered, and the modularization design was carried out considering remote operation and maintenance. In order to design the rod extractor and cutter, these systems were analyzed and designed, also the concept on the rod extraction and cutting were considered by using the solid works tool. The main module consists of five sub-modules, and the function of each is as follows. The clamping module is an assembly fixing module using a cylinder so that the nuclear fuel assembly can be fixed after being placed. The Pusher module pushes the fuel rods by 2 inches out of the assembly to grip the fuel rods. The extraction module extracts the fuel rods of the nuclear fuel assembly and moves them to the consolidation module. The consolidation module collects and consolidates the extracted fuel rods before moving them to the cutting device. And the support module is a base platform on which the modules of the main device can be placed. The modules of level 2 can be disassembled or assembled freely without mutual interference. For the design of fuel rods cutter, the following main requirements were considered. The fuel rod cut section should not be deformed for subsequent processing, and the horizontally mounted fuel rods must be cut at regular intervals. The cutter should have the provision for aligning with the fuel rod, and the feeder and transport clamp should be designed to transfer the fuel rods to the cutting area. The main module consists of 6 sub-modules, and function of each is as follows. The cutting module is a device that cuts the fuel rods to the appropriate depth for notching. The impacting module is a device that impacts the fuel rods and moves them to the collection module. The transfer module is a device that moves the fuel rods to the cutting module when the aligned fuel rods enter the clamp module. The clamping module is a device to clamp the fuel rods before moving them to the cutting module. The collection module is a container where the rod-cuts are collected, and the support module is a base platform on which the modules of the main device can be placed. The module of level 3 can be disassembled or assembled after the cutting module of level 2 is installed, and the modules of level 2 can be disassembled or assembled freely without mutual interference.

Dry head end process is developing for pyro-processing at KAERI (Korea Atomic Energy Research Institute). Dry processes, which include disassembling, mechanical decladding, vol-oxidation, blending, compaction, and sintering shall be performed in advance as the head-end process of pyro-processing. Also, for the operation of the head-end process, the design of the connecting systems between the down ender and the dismantling process is required. The disassembling process includes apparatus for down ender, dismantling of the SF (Spent Fuel) assembly (16×16 PWR), rod extraction, and cutting of extracted spent fuel rods. The disassembling process has four-unit apparatus, which comprises of a down ender that brings the assembly from a vertical position to a horizontal position, a dismantler to remove the upper and bottom nozzles of the spent fuel assembly, an extractor to extract the spent fuel rods from the assembly, and a cutter to cut the extracted spent fuel rods as a final step to transfer the rod-cuts to the mechanical decladding process. An important goal of dismantling process is the disassembling of a spent nuclear fuel assembly for the subsequent extraction process. In order to design the down ender and dismantler, these systems were analyzed and designed, also concept on the interference tools between down ender and dismantler were considered by using the solid works tool.