PURPOSES : The purpose of this study is to identify a gradation control method that minimizes the volatility of recycled aggregates to maintain the quality of reclaimed asphalt mixtures. METHODS : In this study, two types (0~13 and 0~10 mm) of recycled aggregate stockpiles with an extraction viscosity of 40,000 poise and a 19 mm hot asphalt mixture with virgin aggregates are used. The test methods are evaluated for plastic deformation resistance using the Hamburg wheel-tracking test and for low-temperature crack resistance using the dynamic modulus test. In the field, the performance is evaluated via an accelerated pavement test. RESULTS : The Hamburg wheel-tracking test shows good water resistance as well as less than 5 mm of deformation. The result of a dynamic modulus test at -5 °C shows a 92.9% low-temperature crack resistance as compared with that of the 19 mm dense grade hot-mix asphalt mixture. The result of the accelerated pavement test confirms that the performances of the 19 mm dense grade hot-mix asphalt mixture and reclaimed asphalt mixture are equal owing a 1.2 cm plastic deformation. CONCLUSIONS : By evaluating the plastic deformation resistance and crack resistance of the reclaimed asphalt mixture based on a stockpile gradation controlled at 0~10 mm via an indoor test, it is discovered that the plastic deformation resistance increases partially, whereas the crack resistance remains almost unchanged. The accelerated pavement test confirms that a performance equivalent to that of a 19 mm dense grade hot-mix asphalt mixture is achieved.

PURPOSES : Water content causes a big problem in terms of the quality and economy of the asphalt plant. However, the current guidelines do not suggest specific rules other than roof installation. Therefore, this study proposes a water content management index, QM, and management flow chart by analyzing the water content variability of the stockpile and cold bin aggregates and suggests a guideline rule for improving water content management, including stockpile floor inclination via analysis of slope stability. METHODS : To analyze the variability of water content in the asphalt plant, stockpile and cold bin aggregate samples were collected from the asphalt plant over two years and a water content lab test was conducted via sieve analysis. In addition, domestic and foreign water content management guidelines were compared and the economic effect was analyzed according to water content DB analysis for the importance of water content management. The influence factors of water content variability were also analyzed. To apply the 3σ quality management technique for the development of the water content management index, QM, a water content management limit and procedure was proposed through the asphalt mix design. RESULTS : As a result of analyzing the water content variability, it was found that the water content of the stockpile fine aggregates should be intensively managed immediately after the rainy season and the QM index developed in this study should be 1 or more. In addition, as a result of the stability analysis according to the change in the stockpile floor inclination, it was found that the safety factor was lowered according to the slope angle and floor inclination. CONCLUSIONS : In the past, a passive method of preventing rainwater with a roof was used for water content management and ambiguous qualitative rules were suggested in the guidelines. In this study, a procedure for managing the water content of asphalt plant aggregates using the QM index, a quantitative stock floor inclination chart, and rules for improving water content management were presented for the quality control of asphalt plant aggregates.

소입경 골재노출콘크리트포장은 콘크리트 포장 시공 시 포장표면에 적정 응결지연제를 분사한 후 표면 모르타르를 제거하여 굵은 골재를 노출시킴으로서 표면조직을 형성하는 공법으로써 기존 콘크리트 포장의 소음문제를 해결할 수 있는 저소음 공법이다. 소입경 골재노출 콘크리트 포장은 강도를 크게 개선할 뿐만 아니라 소음저감 효과 및 우수한 미끄럼 저항성을 확보하여 도로이용자의 안정성을 확보할 수 있는 공법이다. 현재 국외 도로 선진국의 경우 골재노출 포장의 상용화가 이루어진 상태이지만 국내의 경우는 실용화 초기단계이기 때문에 현장적용을 위해서는 국내 여건에 맞는 합리적인 관리 기준이 필요하다. 이를 위하여 소입경 골재노출 콘크리트 포장의 최적배합 및 노출기법 연구, 굵은 골재의 선정 및 입도 설계, 환경하중 저항성 평가 등 실내시험을 수행하였으며, 소입경 골재노출 콘크리트 포장의 시공을 위한 시공 장비를 제작하였다. 따라서 본 연구에서는 시험시공을 통해 도출된 결과와 기존 실내시험에서 도출된 결과를 비교 분석하였으며, 시험시공 분석을 통하여 골재 탈리 방지, 강도 및 내구성 확보를 위한 표준배합을 제시하였다. 환경 및 시공조건이 상이한 3차례 시험시공 구간을 선정하여 시공현장여건에 유동성으로 대처할 수 있는 시공 기술 및 시공 기준을 제시하였다. 또한 장 단기 공용성 평가를 통하여 도로 포장의 기능성 측면에서 우수한 소음저감 및 미끄럼 저항성을 확보할 수 있는 노면조직의 품질관리 기준을 제시하였다.