In this study, we examined the effect of orifice diameter on atomization performance such as SMD(Sauter Mean Diameter), MMD(Mass median diameter), particle size distribution, spray distance, and spray angle when water was sprayed through a siphon nozzle. In addition, the behavior characteristics of spray were analyzed using the CFD(Computational Fluid Dynamics) commercial program. In the downstream direction of the flow, the dispersion and diffusion power of the droplets increased, greatly improving atomization performance. The spray spread in the radial direction when the jet velocity of water increased. As a result, atomization performance improved as the jet velocity increased.

In this study, an effervescent atomizer capable of mixing and spraying vegetable oil and kerosene at the same time was proposed to examine the usefulness of vegetable oil and kerosene in terms of recycling of renewable energy and waste resources. The effect of nozzle exit diameter variation on the atomization characteristics such as spray angle, droplet size distribution, cumulative volume distribution, and SMD was investigated using LDPA. The results of this study showed that the spray angles decreased with increasing ALR at the same nozzle exit diameter and increased with increasing nozzle exit diameter under the same ALR condition. SMD was decreased with increasing ALR at all nozzle exit diameters, and SMD was decreased with decreasing nozzle exit diameter even under the same ALR conditions. Also, the droplet was more finely atomized when the nozzle exit diameter is reduced under the same ALR conditions and when the ALR is increased at the same nozzle exit diameter, but the uniformity of the droplets was lowered because the droplet with a larger diameter existed.

In recent years, there was many conflagration about special structure such as wooden cultural assets, warehouses and factories. The common causes of increase in the fire damage were difficulty of the initial suppression and absence of equipment for appropriate disaster prevention. A prediction of the air injection diameter of the destruction-spray nozzle, a core technology of destruction-spray fire vehicle which is possible for fire suppression of special structure were studied. As a result, changes in water flow according to the air injection diameter is not large, but air flow rate showed a difference more than up to four times. And then, through the result data of the flow analysis, the air injection diameter was obtained in the target mix ratio of the air according to the water injection pressure. Finally, by the formula derivation for the air injection diameter of target mix ratio of the air, the air injection diameter according to the water injection pressure change could be predicted within an error of 10%.