간행물
한국기계기술학회지 KCI 등재 Journal of the Korean Society of Mechanical Technology 韓國機械技術學會誌
- 발행기관 한국기계기술학회
- 자료유형 학술지
- 간기 격월간
- ISSN 1229-604X (Print)2092-0385 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 기계공학 공학 분류의 다른 간행물
- 십진분류KDC 550DDC 620
권호리스트/논문검색
제25권 제6호 (2023년 12월) 44건
1.
2023.12
구독 인증기관 무료, 개인회원 유료
In the case of the companies selected for noise measurement in this study, even though noise exposure in the workplace begins with noise management for large machines or high-output machines, they only manage to write reports on how much workers are exposed to noise for 8 hours a day. is focused on. When large machines are delivered, little information on noise received from the manufacturer is kept, and noise information indicated on design drawings is also difficult to find. History management of noise information of large machines is necessary. There is also a problem with the professionalism of managers who manage noise information. Like odors and fine dust, it is judged that noise needs to be managed by a professional manager at the workplace and managed through a database of noise information.
3,000원
2.
2023.12
구독 인증기관 무료, 개인회원 유료
The tribology characteristics of the graphene coated PA6 were evaluated with scratch experiments. As a result, the following conclusions were obtained. The PA6 of the graphene coating shows a 0.1 improvement in friction coefficient and a lower abrasion depth than PA6 in the variable pressure-type scratch experiments. PA6 of the graphene coating showed a lower friction coefficient of 0.2 or more than PA6 in the friction coefficient in the static pressure scratch experiments, indicating that wear resistance was improved. In both the variable and the static pressure type scratch experiments, the tip depth of graphene-coated PA6 shows a thinner wear depth than PA6, showing the effect of graphene. The graphene content showed excellent tribology characteristics at 3%, and there was no difference in tribology characteristics at higher contents.
4,200원
3.
2023.12
구독 인증기관 무료, 개인회원 유료
This study aimed to grow single crystals with low dislocation density using a heat exchange method using room temperature water, and investigated the effect of the structure of the heat exchanger under the crucible on the defects and dislocation density of the single crystals and the shape of the solid-liquid interface of the crystals, and obtained the following conclusions. The dislocation density of sapphire single crystal grown at 2,200℃ for 30 min and a growth rate of 0.2℃/min was 0.92x103pcs/㎠. Mo guard was used to stabilize the solid-liquid interface grown from seeds, and sapphire single crystals with a diameter of 130㎜ and a height of 75㎜ were grown.
4,000원
4.
2023.12
구독 인증기관 무료, 개인회원 유료
In contemporary society, traffic concerns and road safety are of paramount importance. Overloading and improper loading significantly jeopardize road safety. Leveraging AI Hub's CCTV traffic videos, overloading hazard data, and Yeosu Sunsin Bridge HS-WIM data from Jeollanam-do, we've crafted detection models. These models facilitate the development of a vehicle detection system calibrated for specific scenarios, making the detection of overloading and loading discrepancies more accessible. Such a system promises to streamline detection operations while substituting manual efforts with AI, thereby economizing on both time and resources.
4,000원
5.
2023.12
구독 인증기관 무료, 개인회원 유료
Application areas of floating marine structure systems have been increased with the development of power generation systems using renewable energy. Hence it is necessary to analyze the behavior of these floating systems for efficient design and operation. In this study, a computational analysis was performed to predict the characteristics of mooring lines load variation connected to a floating marine structure with waves. Pressure on the floating body and mooring lines load were analyzed with wave direction and height. The floating body stability severely decreased for 90° of the wave incident direction, and maximum load of the mooring lines increased with the height. These results are expected to be applicable for optimal design of the marine floating system.
4,000원
6.
2023.12
구독 인증기관 무료, 개인회원 유료
Research into lightweighting to improve vehicle fuel efficiency and reduce exhaust emissions continues as environmental regulations become increasingly stringent. Magnesium alloys, chosen for their lightweight properties, are more than 35% lighter than aluminum alloys and also exhibit excellent mechanical characteristics. While magnesium alloys are commonly utilized in arc welding processes like GTAW and GMAW, they pose challenges such as high residual stresses and welding defects. Laser welding, on the other hand, offers the advantage of precise heat input, enabling deep and high-quality welds while minimizing welding distortion. In this study, fiber laser welding was employed to weld a 4.0mm thick AZ31B-H24 using the Bead on Plate technique. A total of 10 different welding conditions were tested with fiber laser welding, and the cross-sections of the weld beads were examined. Weld bead shapes were measured based on five parameters. The results allowed for an evaluation of the weldability of AZ31B-H24 using fiber laser welding.
4,000원
7.
2023.12
구독 인증기관 무료, 개인회원 유료
Decarbonization plays an important role in future energy systems for establishing a zero-carbon society. Hydrogen is believed to be a promising energy source that can be converted, stored, and utilized efficiently, leading to a broad range of possibilities for future applications. Hydrogen can be stored in various forms, including compressed gas, liquid hydrogen, hydrides, adsorbed hydrogen. Among these, liquid hydrogen has high gravimetric and volumetric hydrogen densities. There are a lot of previous studies on thermal behavior of MLI and VCS and optimization insulation system, but research on the insulation performance by varying the head shape of the tank has not been conducted. In this study, thermal-structural coupled analysis was conducted on the insulation system with VCS positioned between two layers of MLI for a liquid hydrogen storage tank. The analysis considered dome shapes (torispherical, circle, ellipses), and heat flux and temperature were derived from thermal analysis to predict insulation performance. Maximum equivalent stress and deformation were calculated from the structural analysis, and the optimal dome shape was proposed.
4,000원
8.
2023.12
구독 인증기관 무료, 개인회원 유료
In this paper, a tidal power conversion system (PCS) using seawater level differences was presented.. To verify the presented PCS, an actual lab-scale tidal power generation system was constructed. The operation of the lab-scale PCS was first modeled mathematically and was analyzed through dynamic simulation and experimental tests.
4,000원
9.
2023.12
구독 인증기관 무료, 개인회원 유료
In this study, a condensate drain valve was newly installed in the steam inlet pipe line of the soot blower to reduce the amount of condensate contained in the steam for the soot blower. When the economizer is inactive, the condensate drain valve on the soot blower steam inlet pipe line is always opened to drain the condensate. It is intended to reduce environmental pollution and improve economizer performance by reducing the water hammer that inevitably occurs in facilities using steam, and reducing the amount of condensate water generated during the shutdown of the soot blower and the release of soot containing condensate water into the atmosphere when removing soot.
4,000원
10.
2023.12
구독 인증기관 무료, 개인회원 유료
Since ships are exposed to noise and vibration for a long time in seas isolated from land, the stress of workers is high, requiring studies on the improvement of the problem. In addition, the health of crew members on fishing vessels, unlike commercial ships, carrying out fishing activities is closely related to fishing performance. However, considering that most of IMO's guidelines apply to merchant ships, provisions should be made for vibration in accommodation areas of fishing vessels. Accordingly, this study, applying the revised ISO 20283-5:2016 standard and through experiment, investigated the vibration characteristics of the accommodation area for each operating conditions of a 1000-ton trawler fishing vessel. Within the scope of the study and the full-ahead mode, the vibration was highest in the engine control room (4.17mm/s) while the acceptable standard was satisfied sufficiently in all conditions. Application of the merchant vessel vibration standard to fishing vessel is expected to improve the working environment of fishing vessel crew members.
4,000원
11.
2023.12
구독 인증기관 무료, 개인회원 유료
MCCI, one of the ex-vessel phenomena during a severe accident, is generally caused by mutual reactions between molten core and reactor building basemat concrete, but occurs between sacrificial materials made by concrete and corium in APR nuclear power plant with PECS applied. In this paper, MCCI analysis was performed to design and apply a device to block the core melt at the junction connected to the ICI cavity sump from the core catcher installed in the reactor cavity of the APR. Unlike the sacrificial material, which has a cooling effect by inducing erosion of the ex-vessel core melt, the device is composed of concrete applied as a barrier to protect the ICI cavity sump. The decent thickness of the barrier wall of the device was calculated.
4,000원
12.
2023.12
구독 인증기관 무료, 개인회원 유료
In the case of a rear-wheel drive vehicle, a propeller shaft is installed to transmit the driving force of the engine. At this time, the propeller shaft is divided into 2 or 3 pipes, and the bearing is mounted on the vehicle body. And the end of the propeller shaft is connected to the rear differential and connected to the body through the chassis. Due to this complex structure, the propeller shaft must be highly balanced and the mounting angle must be well maintained. However, depending on the driving conditions of the car, various noise and vibration problems occur due to the aging of the parts and the propeller shaft. Hyundai Motor Company's maintenance center uses 'Noise Observer' to resolve various noise and vibration customer complaints. This paper describes the mechanism of vibration problems caused by unbalance of the propeller shaft and the diagnosis process using a 'Noise Observer'.
4,000원
13.
2023.12
구독 인증기관 무료, 개인회원 유료
For the Floating Photovoltaic development project, economic analysis is conducted by predicting the amount of power generation in consideration of climate factors. Among the climate factors, the outside temperature increases the temperature of the module. As a result, the efficiency of the module is reduced. Due to global warming, the outside temperature is rising every year, when estimating the amount of power generation over the next 20 years, a more accurate prediction will be possible only when considering the temperature rise.
4,000원
14.
2023.12
구독 인증기관 무료, 개인회원 유료
In this study, a high-resolution integrated real-time visualization device using surface plasmon resonance was designed and considered to overcome the measurement limitations of existing optical systems. For precise measurements, resonance angle and reflectivity were calculated using theoretical equations, and the designed surface plasmon resonance visualization system was verified by comparison with experimental values using a He-Ne laser. Surface information of the droplet was acquired using polarized, single-wavelength converted white light, and quantified through image processing. As a result of the experiment, it was confirmed that when light with a wavelength of 632.8 nm is incident on the Kretchmann structure prism-metal thin film-dielectric (air/water), it is not totally reflected at an angle above the critical angle and the reflectivity is rapidly reduced due to the surface plasmon resonance phenomenon. As a result of quantifying the image, it was confirmed that the droplet reflectivity was similar to the theoretical reflectivity at each resonance angle.
4,000원
15.
2023.12
구독 인증기관 무료, 개인회원 유료
This study investigated the noise reduction effect according to the structure of the sound-absorption and insulating materials in order to maximize the noise reduction effect in various noise environments. For this purpose, the transmission loss according to the change in hole size of the performated plate in sound-absorption and insulating board was predicted using an CAE model. The sound-absorption and insulating board was modeled and the computation of the transmission loss was performed after applying the physical properties and boundary conditions. The pure sounds of 32Hz to 4,000Hz were generated, and the analysis was performed by changing the diameter and pitch of the perforated plate. It was confirmed that the influence of the diameter and pitch of the perforated plate is closely related to the structure that make up the sound-absorption and insulating material. In order to effectively reduce the variously changing noises, it is believed that a method of improving transmission loss for each frequency band of interest is needed by changing the structure of the sound-absorption and insulating material so that the diameter and pitch of the perforated plate can be changed.
4,000원
16.
2023.12
구독 인증기관 무료, 개인회원 유료
Air blower has been widely used in many industrial fields such as wind tunnel and large ventilation systems. Its performance is affected by operating conditions and system geometry of inpeller and duct, and these design parameter optimization is essential for the effective development. CFD analysis is carried out to investigate the air flow field characteristics with outlet total pressure in a blower system. Intake air into the impeller blade through the inlet is compressed, and then gradually discharged from the outlet with ascending total pressure, and predicted results are compared with test data. Especially this overall pressure difference in the blower system severely depends on the flow rate. These results are expected to be used as applicable design data for blower performance improvement.
4,000원
17.
2023.12
구독 인증기관 무료, 개인회원 유료
This study chiefly aims to clarify important items to establish design guidelines for the habitability of temporary housing. Though prevention of occurring disasters would be the best way, readiness for the protection of suffering psychological damage is essential to construct emergency shelters and temporary housing. Temporary housings until now have raised second psychological injury, due to the lack of community spaces between victims by the disasters. It is meaningful to make fundamental data for establishing design guidelines for the habitability of temporary housing through the advanced countries for the disaster protection.
4,000원
18.
2023.12
구독 인증기관 무료, 개인회원 유료
In this study, we examined the effect of orifice diameter on atomization performance such as SMD(Sauter Mean Diameter), MMD(Mass median diameter), particle size distribution, spray distance, and spray angle when water was sprayed through a siphon nozzle. In addition, the behavior characteristics of spray were analyzed using the CFD(Computational Fluid Dynamics) commercial program. In the downstream direction of the flow, the dispersion and diffusion power of the droplets increased, greatly improving atomization performance. The spray spread in the radial direction when the jet velocity of water increased. As a result, atomization performance improved as the jet velocity increased.
4,000원
19.
2023.12
구독 인증기관 무료, 개인회원 유료
Liquified hydrogen is considered a new energy resource to replace conventional fossil fuels due to environmental regulations by the IMO. When building tank for the storage and transportation of liquified hydrogen, materials need to withstand temperatures of -253°C, which is even lower than that of LNG (-163°C). Austenitic stainless steel mainly used to build liquified hydrogen tank. When building the tanks, both the base material and welding zone need to have excellent strength in cryogenic condition, however, manual arc welding has several issues due to prolonged exposure of the base material to high temperatures. Laser welding, which has some benefits like short period of exposure time and decrease of thermal affected zone, is used many industries. In this study, laser bead on plate welding was conducted to determine the laser butt welding conditions for STS 304 and STS 316L steels. After the BOP test, cross-section observations were conducted to measure and compare four bead parameters. These tendency result of laser BOP test can be used as conditions laser butt welding of STS 304 and STS 316L steel.
4,000원
20.
2023.12
구독 인증기관 무료, 개인회원 유료
Internal combustion engine is the main source of environmental pollutants and therefore advanced technology is required to reduce harmful elements from the exhaust gases all over the world. Especially, when the exhaust gas is released from the automotive muffler, exhaust noise has many bad influence on the surrounding environment. In order to reduce the exhaust noise, it is necessary that automotive muffler must be designed for best exhaust efficiency. The sound insulation room was installed for the analysis of an acoustics characteristics of the noise from automotive muffler, in this study. Exhaust gas noise, noise distribution characteristics, pressure and temperature of exhaust gas were investigated with the change of annulus temperature of air cooled annulus automotive muffler and cooled annulus automotive muffler. The following results were obtained with this study. From the frequency analysis of automotive muffler, high noise distribution was observed in the range 100~2000Hz. It means that the noise in this range has an dominate influence for the overall noise. Noise reduction of automotive muffler was affected by the temperature of annulus. It is caused the result that the high temperature and pressure of exhaust gas are changed lower by the drop of annulus temperature. The tendencies of noise, the temperature and pressure of exhaust gas are similar to the performance curve of engine. Exhaust gas pressure is determined by the r.p.m. of engine and affected by the cooling performance of automotive muffler.
4,000원
