간행물
한국기계기술학회지 KCI 등재 Journal of the Korean Society of Mechanical Technology 韓國機械技術學會誌
- 발행기관 한국기계기술학회
- 자료유형 학술지
- 간기 격월간
- ISSN 1229-604X (Print)2092-0385 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 기계공학 공학 분류의 다른 간행물
- 십진분류KDC 550DDC 620
권호리스트/논문검색
제26권 제1호 (2024년 2월) 31건
1.
2024.02
구독 인증기관 무료, 개인회원 유료
5,100원
2.
2024.02
구독 인증기관 무료, 개인회원 유료
Engineering design involves making numerous decisions as the design process. These decisions can be broadly categorized into selection decisions and compromise decisions. The outcomes of these decisions heavily depend on the designer's intentions, highlighting the need to systematically and accurately incorporate the designer's intentions. The Analytic Hierarchy Process (AHP) is a design technique that systematically reflects the designer's intentions by hierarchically analyzing and evaluating ambiguous decision problems. Therefore, in this study, effective optimal structure designs that maximally reflect the designer's intentions were confirmed by introducing AHP (Analytic Hierarchy Process) and Neural Network into the foundational decision-making process of engineering design.
4,000원
3.
2024.02
구독 인증기관 무료, 개인회원 유료
By developing molds and facilities to horizontally mold the functional part of the dry-cast concrete block, We intend to develop molds and a series of facilities to horizontally mold the functional part of the dry-cast concrete block to increase production per cycle while maintaining existing production methods and major facilities. In order to do so, CAE analysis is first required to develop molds and facilities for horizontally molding the functional part of the drycast concrete block in the horizontal direction. The procedure will be carried out by reviewing the validity of boundary conditions and physical properties, 3D modeling, grid generation, construction of analysis models, model validity, analysis according to frequency changes, and analysis according to physical properties. First, through the comparison of two-point support, three-point support, and two-point and three-point support in the constraint conditions, We would like to compare it with the actual molded product in the horizontal direction. But first of all, it is considered two-point support in the constraint conditions in this paper.
4,300원
4.
2024.02
구독 인증기관 무료, 개인회원 유료
The research aimed to develop a high-efficiency plate-type heat exchanger for exhaust gas using computational fluid dynamics (CFD) thermal analysis based on the plate shape, and to identify the optimal shape. Following this, a water/air plate heat exchanger was manufactured, and its characteristics were studied experimentally. As the Re number increases on the gas (or air) side, the heat transfer rate increases significantly, whereas an increase in the Re number on the water side leads to a smaller increase in heat transfer. This is attributed to the larger convective heat resistance on the gas side, causing a substantial reduction in gas-side heat resistance as gas velocity increases, resulting in a considerable overall reduction in heat resistance. The fluid flow pressure drop showed similar results between the CFD calculations and experimental outcomes.
4,000원
5.
2024.02
구독 인증기관 무료, 개인회원 유료
The global pet market is continuously growing as the number of single-person households increases along with the preponderance of the nuclear family, so pet-related industries are steadily growing. In addition, the market related to the health of companion animals is also increasing significantly. Regarding the health of companion animals, it is reported that the incidence of adult diseases, like humans, is growing mainly due to activities in indoor environments and the lack of exercise due to the lack of time for companion animals. This paper studies the antioxidant properties of Jerusalem Artichoke extract, which can be used as a raw material for functional foods related to adult diseases in companion animals by using substances extracted from Jerusalem Artichokes grown by the first author. Samples to be tested were extracted from hot water extraction and ethanol extraction methods according to conditions. To confirm the antioxidant properties, absorbance analysis, thin-layer chromatography (TLC) analysis, polyphenol measurement, flavonoid measurement, and radical scavenging ability measurement by DPPH were performed to determine whether the raw materials applied in this paper could be used. It was confirmed that Jerusalem Artichoke extract is a suitable additive raw material for functional pet food.
4,000원
6.
2024.02
구독 인증기관 무료, 개인회원 유료
This study deals with the vibration transmissibility of a vibration isolation device, which is composed of frictional damping and nonlinear softening springs, when its base is harmonically excited. The SCAP method, a type of averaging method, is employed to obtain steady-state responses. The vibration characteristics due to excitation of the base are investigated through the analysis of displacement transmissibility in the steady-state response. In this process, displacement transmissibility for design parameters is analyzed, and the stability of the response is also investigated. The vibration isolation effect due to frictional damping is found to be more effective in the case of the softening spring than in the case of the hardening spring. Additionally, the pattern of the jump phenomenon observed during frequency sweeping, both upward and downward, has been identified.
4,000원
7.
2024.02
구독 인증기관 무료, 개인회원 유료
Wheeled inverted pendulum (WIP) systems provide agile motion and energy-efficient locomotion through the wheels. However, they suffer from undesirable wheel motion for the acceleration and change of friction by the surface conditions. This paper presents a wheeled inverted pendulum with a fan (WIPF) that incorporates a fan thrust for the additional force for the control of traditional WIP systems. The WIPF is fully actuated by the wheel torque and the fan thrust, enabling the system to achieve enhanced balancing. The dynamics of the proposed system are analyzed and modeled for the control of the system with a linear quadratic regulator (LQR). The performance and characteristics of the WIPF are studied by simulations and experiments. WIPF showed enhanced balancing in step response for a desired position and improved impact robustness. Moreover, it achieved simultaneous control of the wheel position and body tilt angle, which is not attainable in traditional WIP systems.
4,200원
8.
2024.02
구독 인증기관 무료, 개인회원 유료
Painting pretreatment is an important task in determining the life of painting as it removes rust or foreign substances from the painting surface and gives adhesion between the painting surface and the painting surface. Since painting pretreatment is an important task, IMO strictly requires that the painting pretreatment surface be maintained at a Sa 2.5 grade and the surface roughness is 30μm~75μm. Painting pre-processing is an important task that determines the lifespan of a painting, but it is done through visual inspection by the inspector, and the quality varies depending on the inspector. In this study, in order to develop a quality measurement system for the painting pretreatment surface, Matlab2023b was used to determine the range of appropriate quality brightness by comparing the brightness of the painting pretreatment surface and surface roughness.
4,000원
9.
2024.02
구독 인증기관 무료, 개인회원 유료
Research has been conducted on acoustic metamaterials that control the transmission characteristics of reflected and refracted waves using phase delay by resonators. Using one-dimensional theory, the phase delay equations for the 1/4 wavelength and Helmholtz resonator are presented. These one-dimensional analysis results are compared with the results predicted by three-dimensional FEM. The advantages and disadvantages of 1/4 wavelength and Helmholtz resonator were confirmed in implementing phase delay. An acoustic metamaterial with a refraction angle of 30° was manufactured using multiple tubes and then the sound pressure distribution was measured. A relatively large sound pressure was measured at the target position of 30°, which was compared with the 3D FEM analysis results. Simulations confirmed that a phase delay range closer to 2π was more effective in refraction, but varying the number of resonators was found to have minimal impact on which additional research is needed for generalization.
4,000원
10.
2024.02
구독 인증기관 무료, 개인회원 유료
The overseas small ship market is witnessing a trend towards research aimed at substituting Fiber Reinforced Plastics (FRP), which poses environmental concerns, with High-Density Polyethylene (HDPE) in the shipbuilding process. Given the low melting point and high coefficient of thermal expansion of HDPE, research on joint areas is essential. This study focuses on preliminary investigations into ensuring the integrity of joints in shipbuilding processes using HDPE materials. Utilizing the Hot Gas Extrusion Welding method, which is conducive to joining large structures such as ships, HDPE joints were conducted. The material properties were evaluated based on the ASTM D638-14 international standards. This research aims to provide fundamental knowledge on the joining process of HDPE through Hot Gas Extrusion Welding and offers guidance on ensuring the integrity of joints in shipbuilding.
4,000원
11.
2024.02
구독 인증기관 무료, 개인회원 유료
In this study, theoretical analyses are performed to investigate the characteristics of the static and dynamic stiffness of a nonlinear vibration isolator system. The vibration isolator system is modeled as an equivalent nonlinear oscillator. Based on the model, the static equilibrium and frequency response solutions are obtained with the variations of external static load and/or system parameters. It is shown that the static stiffness of the nonlinear vibration isolator tends to be hardened with the increase of external static load, which prevents the occurrence of excessively large deflection. This static stiffness-hardening effect is more remarkable with a larger spring constant ratio. The dynamic stiffness is also strengthened when the spring constant ratio increases, which enlarges the force transmissibility and reduces the isolation frequency bandwidth. Thus, the static stiffness- hardening improves the robustness of the nonlinear vibration isolator, whereas the dynamic stiffness-hardening rather degrades its performance. Thus, the opposite tendency of the static and dynamic stiffness-hardening effects should be considered in the design process of the nonlinear vibration isolator.
4,000원
12.
2024.02
구독 인증기관 무료, 개인회원 유료
The seismic separation joint is an important device that absorbs vibration displacement from earthquake shock and protects fire extinguishing pipes and various utility pipes. In this study, the mechanical behavior occurring in U-typed and V-typed seismic separation joint was analyzed according to the length of the bellows, the length of the elbow straight pipe, and the open angle. As a result, as the length of the bellows increased, the stress and natural frequency decreased. In addition, as the length of the elbow straight pipe increased, the stress tended to decrease in the case of forced displacement in the vertical direction. As the open angle increased, the stress in the case of forced displacement in the left and right directions increased.
4,000원
13.
2024.02
구독 인증기관 무료, 개인회원 유료
The waste secondary battery contains a significant amount of valuable metals, making its recycling highly desirable. However, conventional chemical methods for recycling are environmentally unfriendly and cost-ineffective. Rather than the chemical method, this paper deals with a mechanical method for recovering electrode materials from waste secondary batteries by blowing pressurized air onto the interface area between the electrode and the separator. Especially, in this study, the effective blowing angle were searched by simulating the separation of the electrode material from the separator through 1-way fluid structure interaction analysis based on the Cohesive Zone Modeling technique.
4,000원
14.
2024.02
구독 인증기관 무료, 개인회원 유료
This paper proposes the armored combat bulldozer, essential for amphibious tasks, requires water ingress prevention and submersion capabilities, typically addressed by a centrifugal pump. This study aims to boost the bulldozer's drainage pump efficiency by replacing the traditional aluminum 3-blade impeller with one made of ASA material using 3D printing. Analysis via ANSYS Fluent revealed that the 5-blade impeller increased discharge volume by 19.31% and efficiency by 6.07%, while the 6-blade variant saw a 27.07% increase in discharge volume and 8.81% efficiency improvement. Further scrutiny with ANSYS Static Structure ensured the new impellers' structural integrity and robustness under extreme conditions. This research confirms the potential of 3D printing in enhancing military equipment, demonstrating significant improvements in pump performance and opening paths for advanced manufacturing techniques to meet the demanding needs of combat vehicles.
4,000원
15.
2024.02
구독 인증기관 무료, 개인회원 유료
The operating parameters considered in this study include evaporating and condensing temperature, degree of subcooling and degree of superheating. in R744-R717 cascade refrigeration system and R744 two-stage compression refrigeration system with the range of low temperature -50℃∼-30℃. The coefficient of performance(COP) of R744-R717 cascade refrigeration system is about 16∼20% greater than that of R744 two-stage compression refrigeration system in the range of evaporation temperature of -50℃∼-30℃. R744 two-stage compression refrigeration system is unstable because its coefficient of performance changes significantly depending on the evaporating temperature and total compression work, and compression efficiency decreases. In this case, not efficient for long-term use. Whereas R744-R717 R744-R717 is a cascade refrigeration system using eco-friendly refrigerants. And this system is a high-efficiency refrigeration system that performs well even under various operating conditions. This is why it can be configured by selecting a refrigerant suitable for the high temperature side and the low temperature side.
4,000원
16.
2024.02
구독 인증기관 무료, 개인회원 유료
In this study, we proposed a novel concept of liquid level indicator that can stably measure the liquid level even with changes in liquid density by enormous temperature changes. This uses a distributed optical fiber sensor based on Rayleigh scattering with high spatial resolution. Additionally, taking advantage of the flexibility of an optical fiber sensor, we introduced a bendable supporting structure and made it possible to freely adjust the angle for ease of installation of the liquid level indicator. In the proof-of-concept experiment using a prototype incorporating the proposed concept, we confirmed that the interface location can be effectively detected by utilizing the difference in heat transfer characteristics between liquid and gas phases, demonstrating the feasibility of liquid level measurement. Such a liquid level indicator is expected to enable more accurate level measurements in environments with huge temperature changes and to be conveniently used even in situations where installation and maintenance of the level meter are challenging due to complex internal structures.
4,000원
17.
2024.02
구독 인증기관 무료, 개인회원 유료
In recent automobile development, vehicle weight reduction has become a very important goal. Seat weight reduction is a large portion of vehicle weight reduction. In this study, a specimen tensile tests were conducted on the Almag material, which is an alloy of aluminum and magnesium, and also conducted on SAFH440, SAFH 590, SAFC780, and SAFH980, which are mild steel materials used in the seat frame. The tensile specimen tests were carried out in two speed; 2mm/s and 4mm/s, and the obtained stress to strain curve was converted to the analysis material card of true stress to true strain curve to be used in the seat structural analysis. The constructed analysis material card was used in the specimen tensile finite element analysis, and the analysis result was able to obtain the stress to strain curve similar to the test result.
4,000원
18.
2024.02
구독 인증기관 무료, 개인회원 유료
As a safety device, a rupture disc are used to control pressure to minimize the explosion risk once the internal pressure of high pressure equipment exceeds a critical level. In this paper, optimization method was developed to secure optimal design of domed Rupture disks. The parameter analysis was performed through design of experiment to parameter of Rupture disk made of AISI 316.The Diameter, Thickness and Hight of Rupture disk were selected as design parameters for design parameter analysis. The results of parameter analysis revealed that the Diameter, thickness and hight were burst pressure-sensitive design parameters. Based on the valid performance factors, a regression equation to predict its performance was deducted and using the equation, an optimal design. And a sample model was fabricated, followed by burst pressure testing, after optimal design and analytical verification. In this research, it is verified that the optimal design method and the credibility of the analysis of this study is deemed very high. Furthermore, utilizing this mechanism would inspect the effect of the design parameter performance and increase the credibility and efficiency of a design.
4,000원
19.
2024.02
구독 인증기관 무료, 개인회원 유료
In this study, infrared thermometry techniques were used to conduct surface wetting performance tests (wicking tests) on micropillar structures with good fluid supply capabilities to enhance the critical heat flux. Wicking tests were conducted based on various micropillar shapes (i.e., diameter and spacing) to investigate the surface wetting performance near the boiling point of the fluid(~100°C). The surface temperature was increased from 20°C to 95°C, to examine the wicking performance The shape of the micropillars were quantified by the roughness and the effect of the roughness and temperature on the wicking performance was analyzed. As a result, we confirmed that the roughness of the micropillars increases the capillary pressure, improving the wicking performance. The sample D04 G10 with the highest roughness coefficient at room temperature (r=2.51) exhibited the highest wicking coefficient, showing a 170% improvement in wicking performance compared to D04G20 with the smallest roughness coefficient at room temperature(r=1.51). Additionally, the D04 G10 sample (r=2.51) recorded a 50% improvement in the wicking coefficient at the highest temperature(95°C) compared to room temperature(20°C). The wicking coefficient data will be utilized as a database for developing a new correlation for critical heat flux.
4,000원
20.
2024.02
구독 인증기관 무료, 개인회원 유료
Engineering design primarily focuses on product improvement through enhancing existing functionalities, integrating features, or adding new capabilities. In other words, it can be said that more design(adaptive design) changes to existing products based on benchmarking with competing products, differentiation strategies, changes in customer needs, etc. are actually performed rather than developing new products that did not exist before. Especially in the case of custom production, such as ships or buildings, a significant portion of actual design work involves modifying and adjusting past performance data according to the current customer's requirements. Therefore, design methods should be developed in a way that effectively supports these processes. Therefore, in this study, as QFD (Quality Function Deployment) ‘analysis of existing products’ and ‘creation of new alternatives’ is supported in Marine Concept Design with AHP (Analytic Hierarchy Process) techniques such as ‘Value Evaluation in Analysis Work’ and ‘Design Alternative Evaluation’, as a result, basic research was conducted on whether it could be used as a tool to effectively support the flow of the design process.
4,000원
1
2
