The global pet market is continuously growing as the number of single-person households increases along with the preponderance of the nuclear family, so pet-related industries are steadily growing. In addition, the market related to the health of companion animals is also increasing significantly. Regarding the health of companion animals, it is reported that the incidence of adult diseases, like humans, is growing mainly due to activities in indoor environments and the lack of exercise due to the lack of time for companion animals. This paper studies the antioxidant properties of Jerusalem Artichoke extract, which can be used as a raw material for functional foods related to adult diseases in companion animals by using substances extracted from Jerusalem Artichokes grown by the first author. Samples to be tested were extracted from hot water extraction and ethanol extraction methods according to conditions. To confirm the antioxidant properties, absorbance analysis, thin-layer chromatography (TLC) analysis, polyphenol measurement, flavonoid measurement, and radical scavenging ability measurement by DPPH were performed to determine whether the raw materials applied in this paper could be used. It was confirmed that Jerusalem Artichoke extract is a suitable additive raw material for functional pet food.

This study is related to the development of lightweight automotive materials that were carried out to develop eco-friendly vehicles worldwide. High-strength aluminum alloy is used as one of the significant lightweight materials in the field of transportation machinery, and it is used as a lightweight material in various areas, including automobiles. The A356 alloy used in this study is an excellent aluminum alloy material that has widely used as a high strength aluminum alloy material in various forming methods. In this study, to examine the characteristics of the two alloys in which Mn and Sr elements were added to the A356 alloy and the A356 alloy, both alloys were manufactured by metal mold casting, which is a gravity casting method. The obtained specimens were heat-treated under the same conditions. In this study have investigated of the microstructure analysis, thermal analysis, crystal phase analysis, and mechanical property evaluation were performed to confirm how the added Mn and Sr elements influenced the microstructure, precipitate formation, and mechanical properties.

This study has related to lightweight automobiles due to global warming with the reduction of fossil fuel reserves are rapidly progressing around the automobile industry. This study has revealed the relationship for the mechanical properties via the analyzed microstructure, precipitated phase variation of the wheel hub of a commercial vehicle manufactured using molten forging technology using A356 and A357 alloys, which are high-strength Al-Si-Mg base cast aluminum alloys. Differential scanning calorimetry has performed to analyze the precipitation amount of each alloy that influences the mechanical properties of aluminum alloy. The XRD analysis has measured for the microstructure's crystal phase on A356 and A357 alloys. In this paper has evaluated to compare the properties of the A356 alloy and the A357 alloy for the mechanical properties. The A356 alloy has confirmed that a microstructure is finer than A357 alloy, and a quantity of precipitated material is more than A357 alloy. Therefore, this study confirmed that the A356 alloy has better mechanical properties than the A357 alloy.

CFRP materials are one of the excellent lightweight materials of the next generation. Also, the CFRP materials are attracting materials form the global automotive industry. However, CFRP material is made at a high cost of carbon fiber as raw material, so research of production cost reduction into the development of molding equipment and molding process technology related to mass production for the automotive industry is actively administered. Generally, CFRP is known as a high corrosion-resistant material in which no corrosion occurs. However, the investigation of the relationship with corrosion behavior on the roughness of CFRP's conditions according to is rarely studied. In this paper, the surface roughness has conducted three surface roughness conditions given arbitrarily, and the electrochemical evaluation has performed under the electrolysis conditions of 5 wt.% NaCl, which is the salt-water test condition of vehicle parts in automotive industries. Moreover, the samples were analyzed with changes of microstructures by FE-SEM and chemical composition's variation by EDS before and after electrochemical evaluation.

Aluminum High Vacuum Die-casting process has become more prevalent in automotive manufacturing industry which require high productive rate, weldable process and heat treatment process. However, high pressure die castings usually contain gas porosity due mainly to the entrapment of air or gas in the die during the high speed injection of the molten metal into the die cavity. Vacuum block system with disk spring was developed and vacuum chanel was optimized with numerical flow analysis. The porosity of die castings was analyzed by X-ray CT, and the effect of porosity on the mechanical properties was analyzed by hardness and tensile test. Tensile strength was improved 49.5% for 50mbar high vacuum die-casting process compare then 300mbar. And then, Surface property was analyzed with plunger velocity and fast shot set point.

In this study, Equivalent fracture strain and Fracture energy were evaluated with the small punch test(SP test) for friction stir welded(FSW) Al6061-T6 sheets. With the three rotation speeds and the three feeding rate, The nine different conditions of FSW were prepared for the SP test. The SP test specimens were manufactured and tested on the advancing side, center, and retreating side to the tool rotation direction. From the SP test data, the equivalent fracture strain and the fracture energy were analyzed. The high value of equivalent fracture strain was attained form tool rotational speed 900RPM and feeding rate 330mm/min. It is found that its characteristic is about 14% higher than the value of condition 1100RPM-330mm/min that have the lowest value. The high value of fracture energy was obtained from the tool rotation speed 900RPM and feeding rate 330mm/min. The lowest fracture energy, which from 1000RPM-300mm/min, was approximately 16% difference to the highest value.

The investigation on the lightweight of automobiles has been underway in commercial vehicles as well as passenger cars due to global warming and strengthening of European emission standards. In this study, the V-arm were developed for lightweight parts using aluminum alloy instead of steel with high pressure die casting processing. This study has focused on lightweight adaptive concept design. Several models of V-arm were designed and analyzed for the fluidity and solidification. V-arm was produced with ADC12 by high pressure die-casting process. The mechanical properties of developed V-arm were measured; such as tensile strength, elongation, shear strength, and durability. The possibility of mass production with the light weight aluminum V-arm substitute from the steel. The weight was reduced about 38% from 16kg to 9.98kg. The productivity was improved with decreasing the process from 8 to 5 by All-in-0ne process using high pressure die-casting.

Magnesium alloy is becoming known for the lightest material in the metallic materials. Recently the automotive industry has a variety application to the light weight parts replacement. This study focuses on the mechanical property improving through a tiny amount’s CNT addition into the magnesium alloy as AM60. The CNT material is an arduous combination of the metallic materials. Therefore this study is concentrating on the contact force growth for the CNT material. Consequently, the made CNT is produced by the CVD process using the magnesium catalyst. The CNT material has dispersive with mechanical process into the molten AM60 alloy. The mechanical experiment result that hardness is 18% increasing and tensile strength is 13% increasing, better than the raw AM60 alloy on this investigation.

High-energy mechanical milling (HEMM) and sintering into Al-Mg alloy melt were employed tofabricate an Al alloy matrix composite reinforced with submicron and micron sized Al2O3 particles. Al-basedmetal matrix composite (MMC) reinforced with submicron and micron sized Al2O3 particles was successfullyfabricated by sintering at 1000oC for 2h into Al-Mg alloy melt, which used high energy mechanical milled Al-SiO2-CuO-ZnO composite powders. Submicron/micron-sized Al2O3 particles and eutectic Si were formed by in situdisplacement reaction between Al, SiO2, CuO, and ZnO during sintering for 2h into Al-Mg alloy melt and werehomogeneously distributed in the Al-Si-(Zn, Cu) matrix. The refined grains and homogeneously distributedsubmicron/micron-sized Al2O3 particles had good interfacial adhesive, which gives good wear resistance withhigher hardness.