This study deals with the vibration transmissibility of a vibration isolation device, which is composed of frictional damping and nonlinear softening springs, when its base is harmonically excited. The SCAP method, a type of averaging method, is employed to obtain steady-state responses. The vibration characteristics due to excitation of the base are investigated through the analysis of displacement transmissibility in the steady-state response. In this process, displacement transmissibility for design parameters is analyzed, and the stability of the response is also investigated. The vibration isolation effect due to frictional damping is found to be more effective in the case of the softening spring than in the case of the hardening spring. Additionally, the pattern of the jump phenomenon observed during frequency sweeping, both upward and downward, has been identified.

In this paper, the effect of a dynamic vibration absorber to suppress the response of a base excitation vibration system composed of a cubic nonlinear spring and a friction damper is investigated. And the dynamic absorber consists of a linear spring and a viscose damper. The mathematical models of these systems are governed by second order nonlinear ordinary differential equations. The response characteristics of the system are analyzed using the slowly changing phase and amplitude(SCPA) method, which is one of the averaging methods. As a function of the friction force ratio, It was obtained the locking frequency at which the relative motion starts was obtained, and the regions where the locking occurred. The displacement transmissibility was investigated according to the change of the design parameter, and the optimal design parameters could be found to minimize the displacement transmissibility.

Friction damping is often used as a vibration isolation medium to protect large objects from vibration. In this paper, it is modeled and analyzed a basis-excited nonlinear vibration system with friction damping using the SCPA method, which is one of the averaging methods. The displacement transmissibility and the stability of the steady state response were analyzed seperately for the linear and the non-linear spring systems. The critical frequency at which the relative motion starts was obtained as a function of the friction ratio, and the characteristics of the displacement transmissibility according to the change of the design parameters were investigated. In the case of the nonlinear spring system, the displacement transmissibilities were divided into three types and the motion characteristics were considered. In particular, there was a peculiarity that the displacement transmissibilty curve was separated at specific parameter values.

본 연구에서는 파일럿 규모 광펄스 처리 장비를 이용한 광펄스 처리의 해수에 오염된 Escherichia coli에 대한 저 해 효과를 확인하였다. 광펄스 처리를 이용한 해수 살균 시에는 처리 용량이 70 L 인 반응기를 이용하여 약 160 L 의 해수를 연속식으로 처리하였다. 처리 frequency와 반응기로 유입되는 해수의 유속은 각각 5 Hz와 15 L/m으로 고 정하였고, 처리 전압은 1,800, 2,000, 그리고 2,400 V로 설정하였다. 처리 전압이 1,800 V에서 2,000 V, 그리고 2,400 V로 증가할 때 해수에 접종된 E. coli 저해 정도는 3.2 ± 0.9에서 4.8 ± 0.3, 그리고 7.15 ± 0.5 log CFU/mL로 증가하 였다. 광펄스 처리에 따른 해수 살균 시 해수의 온도 변화(ⵠT)는 처리 전압 1,800, 2,000, 그리고 2,400 V에서 각각 0.0, 1.2, 그리고 1.6 ℃로 확인되었다. 본 연구를 통해 광펄스 처리가 해수 내 E. coli를 효과적으로 저해시킬 수 있 는 비가열 살균 기술임을 확인할 수 있었다.

The purpose of this study is to develop and apply an oil leak detector using a capacitive sensor to detect oil leak in hydraulic equipment. The developed oil leak detector consists of a sensor and a sensing circuit. The sensor is designed using the difference in the permittivity of air and oil to change the capacitance, and the sensing circuit is composed of a charge amplifier and rectifier circuit. The sensing device is made of a PCB module to output the DC analog signal. In this study, this oil detector was installed in a cyclic pressure tester for evaluating valve life and was applied to detect the leakage of the test valve. It can also be applied to detecting the oil leakage of various hydraulic types of equipment and reduce maintenance costs by preventing large leakage of hydraulic oil.

The damping effects on stabilities of a simply supported pipe conveying fluid is investigated using the complexification-averaging method. The flow is assumed to vary harmonically about a mean speed. Unstable conditions of a piping system included with the viscous and material damping are analytically obtained for primary, secondary and combination parametric resonances. The primary and secondary resonances occur when the frequency of flow fluctuation is close to one and two times the natural frequency. And when this frequency is close to the sum of any two natural frequencies, combination resonances occur. The effects of damping parameters on the regions of three parametric resonances are discussed.

본 연구는 정부의 중소기업 R&D 지원 사업에 대한 효과를 개별 사업체 수준 자료를 활용하여 추정하였다. 2010년도 정부 R&D 지원 사업에 참여한 업체의 기술성과, 민 간 R&D 유인효과, 고용효과를 사업체 수준에서 분석하였다. 본 연구의 결과는 다음과 같다. 첫째, 정부의 중소기업에 대한 R&D 투자(규모 및 건수)는 국내 특허 등록 실적에 정(+)의 영 향을 미치는 것으로 나타났다. 특히 국내외 특허 등록 실적은 자산규모가 큰 사업체일수록 많은 것으로 나타났으나, 정부투자 연구사업 주관업체의 기술성과는 공동⋅위탁⋅참여업체 에 비해 오히려 낮은 것으로 추정되었다. 둘째, 정부의 R&D 정책은 민간 R&D 인센티브와 보완적 기능을 가지고 있는 것으로 추정되었으며, 정부 R&D 투자 1% 증가는 사업 종료 후 민간업체의 R&D 지출을 비탄력적으로(0.193～0.245%) 증가시키는 것으로 나타났다. 셋째, 정부의 R&D 지원이 참여기업의 고용 성장에 기여한 것으로 나타났다. 특히, R&D 지원의 고용에 대한 성과가 기업규모 및 기술수준별로 차이를 보임에 따라 정부의 R&D 정책에 있어 기업의 특성을 고려한 차별적 지원이 필요하다.

This study assessed the removal efficiency of NOM which is known as the precursors of DBPs in advanced water treatment using the ceramic membrane filtration, introduced the first in the nation at the Y water treatment plant (WTP). It is generally well-known that the removal of NOM by MF Membrane is very low in water treatment process. But, the result of investigation on removal efficiency of NOM in advanced water treatment using the ceramic membrane was different as follows. The removal rate of organic contaminant by the ceramic membrane advanced water treatment was determined to be 65.5% for the DOC, 85.8% for UV254, and 77 to 86% for DBPFP. The removal rate of pre-ozonation was found to be 6 to 15% more effective compared with the pre-chlorination. The removal rate of DOC and UV254 in biological activated carbon(BAC) process was over 50% and 75%, respectively although the rate was decreased 10 ~ 20% according to analysis items in converting from GAC to BAC.

본 연구는 국내 최초로 도입된 Y 정수장의 세라믹막 고도정수처리를 위한 최적 운영 인자를 도출하기 위하여 수행되었다. 경제성과 수질조건을 만족하면서도 세라믹막 여과성능을 지속⋅유지할 수 있는 최적 운영조건을 도출한 결과, Y 정수장의 평상시 수질 조건에서 막역세척으로 인한 배출수 발생량을 최소화시키면서도 막여과성능을 유지할 수 있는 최적 여과지속시간(역세척 주기)은 시설용량(16,000 m3/일) 기준 시 4.0시간으로 조사되었다. 또한 화학세척(CIP)에 따른 막차압 회복력을 조사한 결과, 구연산을 이용한 산세정을 통하여 철, 망간, 알루미늄 등의 막 파울링을 일으키는 무기오염물질은 제거되지만 막 회복률은 낮았다. 반면 차아염소산나트륨을 사용한 알칼리 세정을 통해서는 막 운영 초기 막차압으로 회복되는 것으로 나타났다. 막차압을 발생시키는 파울링 주요 원인물질은 친수성 고분자 유기오염물인 polysaccharides로 조사되었으며, 화학세척(CIP)시 막성능 회복률은 세척약품 온도에 의한 영향이 매우 크며, 온도가 높은수록 막성능 회복률이 향상되는 것으로 조사되었다.

We measured indoor, outdoor, and personal exposure concentrations of ozone (O₃) at 54 households in Gwangyang from June to September, 2009. The results are as follows. The concentration of ozone in outdoor, 16.53±5.72 ppb, was observed two times higher than the concentration of ozone in indoor, 8.22 ± 4.60 ppb. The similar arithmetic average ozone were obtained in exposed and controlled areas, 15.16 ± 1.45 ppb and 15.25 ± 1.94 ppb, respectively. The ozone concentration of an individual smoker was 24.89 ± 7.11 ppb, which was higher than that of a non-smoker, 21.01 ± 11.79 ppb. The indoor occupant density elevated ozone concentrations. The relatively low concentration of ozone was observed in a house with air conditioner (8.59 ± 4.04 ppb) than a house without the unit(10.07 ± 6.43 ppb).

한반도 동해안 해수욕장 주변의 해안사구 식생양상을 분석한 결과는 다음과 같다. 식물군락은 좀보리사초군락, 우산잔디군락, 왕잔디군락, 해당화군락, 순비기나무군락, 통보리사초 전형군락으로 구분되었다. 이들 군락은 통보리사초, 갯메꽃, 갯씀바귀, 갯그령, 갯완두, 갯방풍의 식별종으로 보아 갯방풍군강(class)의 통보리사초군목에 포함되었다. 순비기나무군락은 해수욕장 주변의 해안사구 식물군락 중 가장 이질적이었으며 왕잔디군락은 전형적인 해안사구 식물군락과 가장 가깝게 결합하였다. 해안사구의 배후지 근처에 나타나는 해당화군락과 순비기나무군락은 해수욕장 주변의 인위적 간섭이나 교란 등에 의하여 사빈의 해안사구에 출현한 것으로 판단되었다.

In order to investigate stresses of dental patients in dental clinic by dental-analogous stimulations, we selected 23 women and 36 men who are students of dental college in D university. This experiment was performed to compare and analyze the changes of Galvanic skin resistance and heart rate by dental-analogous stimulations. In paired t-test of male group's GSR average, there were significant differences between sound and touch, and among pain and other stimulations. And in paired t-test of female group's GSR average, there were significant differences among pain and other stimulations. In paired t-test of male group's heart rate average, there were significant differences between vision and pain, and between touch and pain. And in paired t-test of female group's heart rate average, there were significant differences between smell and pain. In unpaired t-test of male and female group's GSR average, there were no significant differences in smell, sound, vision, touch, and pain. In unpaired t-test of male and female group's heart rate average, there were no significant differences in smell, sound, vision, touch, and pain. It seemed that stresses during dental treatment could be changed by surrounding circumstances and sex distinction.

Established SGT cell line from human submandibular gland adenocarcinoma was used to study the TGase expression on a cellular level in vitro. Transglutaminase 2(TGase 2) is assoacitated with apoptosis, GTP binding protein, and cell marix interaction. The role of TGase 2 in salivary gland tumors is not clear yet. The pupose of this study were to examine the TGase expression of SGT cell line compared to other tumor cell lines, and to apply these results to the pathogenesis of salivary gland tumor. TGase enzyme assay of SGT, SCC-15, HN 4 and HeLa tumor cell line was 3 times repeated, and calculated. Immunoslot blot for semiquantitative protein analysis was done. The obtained results were as follows. 1. SGT cell line showed the highest TGase 2 enzyme activity(about 6-16 folds) irrespective of pre or postconfluency. 2. HN 4 cell line showed the highest TGase 1 enzyme activity(about 2-3 folds) irrespective of pre or postconfluency. 3. Under postconfluency TGase 1 induction was not induced, but slightly increased in all tumor cell lines. 4. TGase enzyme activity in all tumor cell lines was accompanied with TGase protein formation. From the aboving results, the higher TGase 2 expression of SGT cell line suggested that they would come from submandibular ductal cells and have a important role in the pathogensis of salivary gland tumors.

Cell adhesion is used as a parameter to evaluate the biocompatibility of dental implant and also affected by the surface form of dental implant. Most study have showed different cell reaction by the composition and the surface morphology of implant. Therefore it is thought that the osteoblastic activity would be affected by the surface roughness and composition of implants. This study was performed to evaluate the biological activity and morphological change of normal human osteoblastic cells(NHost) depending on the variations of implant surfaces. We used grade 2 titanium disks which were being air-blasted with TiO2 50 ㎛, 110 ㎛, 250 ㎛ powder by 3psi compressed air and non-blasted as control. We evaluated and compared morphologic change, adhesion assay, and Ca, P, ALP concentration of NHost in vitro. The obtained results were as follows. 1. In the growth curve, although the growth of experimental groups were lower than that of the group of NHost only, there was no significant difference between each groups. 2. Inverted microscopic findings showed NHosts in early stage of each group were adherant perpendicular to the titanium disk and the multilayered NHosts were attached with various directions after 4 weeks. 3. Scanning electron microscopic(SEM) features showed that NHosts in all groups seemed to be attached multilayered and connected with each process after 2 weeks. 4. NHosts' processes were found by the SEM after one day culture. The cell adhesion of experiment group was higher than that of control group. 110 ㎛(the 3rd group) showed prominant process of NHost on the titanium disk surface. 5. Although the concentrations of Ca, P and ALP were gradually reduced, ANOVA analysis of each groups were partially different, and ANOVA analysis of 4th group were significantly different with others. From the aboving results, NHosts cultured on the titanium disks showed similar morphological change and cell proliferation. There were partially differences in each group except the 4th group, and the 4th group were significantly different with other's in biological activity. We thought that biological activity and adhesion of NHost cell on titanium had been affected by the variation of the titanium surface roughness.

The mother machine makes the necessary shape by processing materials such as metal. The SCFs are applied to the processing surface when the mother machine processes the material, thereby improving the cutting conditions. SCFs contain high concentrations of organic components and nitrogen compounds, which can cause problems such as eutrophication and algae bloom. Therefore, proper treatment is required. Electrochemical treatment is expected to be an alternative to conventional processes, and to be useful in various wastewater treatments. Moreover, it is an efficient elimination technique for contaminants and has a simple equipment composition. In this study, the removal efficiency of the T-N contained in the waste SCF using electrochemical treatment is analyzed. The electrode was made of titanium and iridium, made into a perforated metal sheet to prevent an imbalance of the sample concentration in the reactor. Experiments were conducted to examine the effects of current density and the concentration of the supporting electrolyte (NaCl, Na2SO4) on removal efficiency. In the cases with 60 A/m2, 80 A/m2, and 100 A/m2 current densities, the removal efficiencies of the T-N contained in the waste SCF were 51.03%, 68.83%, and 79.58%. Comparing between the addition and non-addition of NaCl, the removal efficiency with the addition of NaCl (5 ~ 10 mM) was higher than for no addition at 60 min for all current densities. The addition of Na2SO4 increased the removal rate of the T-N, but it was less effective than NaCl addition.

Soluble Cutting Fluids (SCFs) have been used in metal machining processes to improve the quality of metal processing equipment and products. Although SCFs are useful and essential material, wasted soluble cutting fluids are harmful in hydroecological systems because of the high concentration of COD and nitrogen material. If discharged to hydroecological systems without specific treatment, they may cause eutrophication in rivers and lakes. Therefore, the removal efficiency of the COD contained in the SCFs is investigated in this study using electrochemical treatment with an insoluble electrode. The electrode was made of titanium with iridium plating, made from a perforated metal sheet to agitate the sample in the reactor. Cathode and anode electrodes were inserted into acrylic reactor alternately and the reaction time was one hour. The experimental results were as follows: First, for 60 A/m2, 80 A/m2, and 100 A/m2 current densities, the COD removal efficiencies were 42.0%, 63.9%, and 78.4%, respectively.

The use of Soluble Cutting Fluids (SCF) is essential in the development of industrial technology. However, it is difficult to decompose biologically due to its high concentrations of organic substances and nitrogen compounds, which interfere with microbial growth. Recently, Advanced Oxidation Processes are being studied both domestically and internationally. Electrolysis is highly adaptable industrial wastewater treatment because it has high removal efficiency and short processing time, regardless of the contaminant’s biodegradable nature. Accordingly, this study shows the characteristics of total nitrogen removal in SCF on the operating time, current density, and electrolytes when using aluminum in a batch-type reactor. The results are as follows: ① Under the condition of without the electrolyte when the current density was adjusted to 40 A/m2, 60 A/m2, or 80 A/m2, the respective T-N removal efficiencies were 71.7%, 80.6%, and 87.2% at 60 min. ② In the comparison for the condition of whether NaCl was added, the removal efficiency of adding NaCl (5 ~ 10 mM) was higher than non-addition at 60 min for all current densities. ③ In the comparison for the condition of whether Na2SO4 (5 ~ 10 mM) was added, the removal efficiency when adding Na2SO4 showed no significant difference compared to non-addition at 60 min for all current densities.

화석에너지 자원 고갈 및 경제발전에 따른 산업화가 가속화되면서 폐기물의 발생량이 지속적으로 증가하여 폐기물 에너지화 기술에 대한 관심이 급증하고 있다. 공정상에 발생하는 폐기물 중에서 특히, 메탄올의 경우에는 분리가 쉬우며 저장성이 용이하고 연료전지 사용 및 수소에너지로의 변환이 용이하므로 많은 전원장치에서 응용이 가능하다. 공정상에서 비상전원의 경우에는 배터리 또는 연료전지를 이용하게 된다. 이때 PEM 연료전지를 이용할 경우 배터리에 비해 에너지 밀도가 현저히 높기 때문에 장시간 비상전원 공급이 가능하다. 메탄올의 경우에는 다른 폐기물에 비해서 높은 수소 : 탄소 비를 가지며 낮은 끓는점을 가지면서 공정 폐기물에서 쉽게 추출할 수 있으며 저장하는데 별도의 장치가 필요 없고 또한 낮은 온도에서 간단한 조건에서 쉽게 개질이 가능하므로 연료전지 시스템에 적용이 용이하다. 본 연구에서는 공정상 추출한 메탄올을 비상전원장치의 연료로 사용한 PEM 연료전지에 적용이 가능한 메탄올 개질 반응에 대한 연구를 수행하였다. 수소를 생산하는 개질반응에는 열분해 반응, 수증기 개질 반응, 부분 산화 반응 및 수증기 개질 반응 및 부분 산화 반응의 조합으로 이루어진 자열 개질 반응이 존재한다. 4가지의 개질반응에 대한 각각의 실험을 수행하여 비상전원시스템으로의 적합성에 대한 연구를 수행하였다. 비상전원시스템의 경우에는 구조가 간단하고 부가 장치가 적을수록 가공, 제작 및 장치 구동 면에서 유리하고 또한 성공적인 비상 PEM 연료전지 구동을 위한 수소 생산을 위해서는 연료 개질 시스템은 복잡하게 구성되며 연료전지의 구동 온도가 낮을수록 더 많은 과정을 거치게 된다. 비상전원시스템에서 동적 부하 변동에 빠른 응답성을 가지며 동시에 메탄올에 대해서 비교적 안정적인 운전이 가능하며 외부 열원의 사용을 최소화 할 수 있는 개질 반응 연구를 수행하였다. 다양한 개질 반응에 대한 수소 발생률 및 BOP(Balance of Plant)의 비교 검증을 통하여 비상전원시스템에 가장 적합한 개질 반응에 대한 선택을 하였으며 선택된 개질 반응을 이용하여 비상 PEM 연료전지 전원장치 시스템에 적용시켰다. 이는 비상 PEM 연료전지 전원장치 뿐만 아니라 다양한 연료 처리 장치에 적용 가능할 것으로 판단된다.