본 연구에서는 일반적으로 O/W 에멀젼에 비해 안정화가 어려운 W/O 에멀젼, 특히 유동성이 높은 저점도 W/O 에멀젼의 안정성 증진을 위하여 유화제, 전해질, 유화 안정화제, 겔화제 등을 적용한 다양한 실험을 수행하여 보았다. 그 결과 이번 실험에서는 Polyglyceryl-4 diisostearate/ polyhydroxystearate/sebacate를 주 유화제로 하면서 PEG-30 dipolyhydroxystearate와 Cetyl PEG/PPG-10/1 dimethicone을 보조 유화제로 하는 유화 체계에, 전해질로 Sodium chloride를 0.5 %, 유화 안정화제로 Distearyldimonium chloride를 1 %, 유상 겔화제로 Glyceryl behenate/eicosadioate를 0.5 % 적용한 유화 입자도 작고 조밀하며 점도도 2,000 cps 이하로 일정하게 유지되는 안정한 저점도 W/O 에멀젼을 제조할 수가 있었다. 또한 상기와 같은 에멀젼 베이스에 무기 자외선 차단성분의 적용 실험을 통하여 안정성이 우수한 저점도 플루이드형 자외선 차단제품의 개발 가능성도 긍정적으로 검토 할 수가 있었다.

The purpose of this study was to investigate radiation dose sensitivity due to displacement of human extremities in the water bolus box on radiation therapy. Water bolus box and human thigh with femur bone were constructed in computerized radiation therapy planning system to verify the absorbed dose. Two 6MV X-ray beams were irradiated bilaterally into water bolus box and then radiation dose were calculated each situation at displacement of middle axis of thigh from the center in water bolus box to right and left direction. Absorbed dose of thigh and femur bone increased by the distance of displacement. The maximum dose of thigh even increased 20% over than prescribed dose. This is in contrast to conventional concept of dose distribution in water bolus box. Based on this result, displacement of body site in the water bolus box have to be averted during radiation therapy.

The purpose in this study is to investigate CT number difference between conventional CT and CT simulator. It shows good correlation in CT number on the muscle, bone, and air. However, in the liver, lungs and water, the low correlation was detected. This result can become the good index for the direction of the distribution of dose difference research between CT equipment for using the computerized radiation therapy planning system.

본 연구에서는 자외선 차단제품에서 오일의 극성도, 에멀젼의 종류, 제품의 점도, 증점제의 종류 그리고 광안정제 등이 자외선 차단 효율에 미치는 영향을 조사해 보았다. 그 결과 오일의 극성도 가 높으면 자외선 차단 효과는 높게 측정되었으며(Butyloctyl salicylate: SPF 44.10, PA 7.93), 반대로 오일의 극성도가 낮으면 자외선 차단 효과는 낮게 측정되었다(Dimethicone: SPF 16.40, PA 5.57). 에멀 젼의 종류는 O/W 에멀젼보다 유기 자외선 차단제가 외상에 존재하는 W/O 에멀젼에서 자외선 차단 효율이 더 높게 측정되었다. 제품의 점도는 높아질수록 자외선 차단 효율이 비례적으로 상승하는 경향을 나타내었으며, 증점제의 종류 및 유화입자 크기는 자외선 차단 효과에 미치는 영향이 크지 않았다. 또한 광안정제의 함유 여부도 자외선 차단 효율에 영향을 미치는 중요한 인자 중의 하나로 나타났다. 이러한 결과들은 자외선 차단제의 추가적인 증량이 없어도 자외선 차단 효율을 더 높일 수 있음을 의미하는 것 으로, 앞으로 자외선 차단제품 개발 시 경제적 효율성을 높이는데 큰 도움이 될 것으로 사료된다.

This study assessed the removal efficiency of NOM which is known as the precursors of DBPs in advanced water treatment using the ceramic membrane filtration, introduced the first in the nation at the Y water treatment plant (WTP). It is generally well-known that the removal of NOM by MF Membrane is very low in water treatment process. But, the result of investigation on removal efficiency of NOM in advanced water treatment using the ceramic membrane was different as follows. The removal rate of organic contaminant by the ceramic membrane advanced water treatment was determined to be 65.5% for the DOC, 85.8% for UV254, and 77 to 86% for DBPFP. The removal rate of pre-ozonation was found to be 6 to 15% more effective compared with the pre-chlorination. The removal rate of DOC and UV254 in biological activated carbon(BAC) process was over 50% and 75%, respectively although the rate was decreased 10 ~ 20% according to analysis items in converting from GAC to BAC.

품종 육종의 주요 목표중 수량의 증가를 위한 요인들을 선발하는 것이 중요하며, 콩에서 수량을 결정하는 요인들중에서는 협수와 립수가 중요한 요인으로 알려져 있다. 따라서 본 연구는 큰올콩과 익산10호를 교배하여 얻은 F10세대의 RIL 계통을 이용하여 수량에 관여하는 요인중 주당협수와 주당립수 및 협당립수를 조절하는 QTL을 분석하였다. 주당협수는 염색체 5번( LG A1), 6번(LG C2), 8번(LG A2)과 9번(LG K) 및 18번(LG G)에서 5개의 독립된 QTL이 탐지되었으며, 주당립수는 염색체 1번(LGD1a+Q), 6번(LG C2), 9번(LG K), 13번 (LG F)과 17번(LG D2) 및 18번(LG G)에서 6개의 독립된 QTL이 탐지되었다. 협당립수는 2개의 독립된 QTL이 염색체 11번(LG B1)과 19번(LG L)에서 탐지되었는 데 염색체 19번(LG L)에서 탐지된 QTL은 전체 변이의 19.3%를 설명하는 주요 QTL이었다. 한편 주당협수와 주당립수는 염색체 6번(LG C2)과 9번(LG K) 및 18번(LG G)에서 공통된 QTL이 탐지되었다.

The objectives of this study were to investigate the degrees of emotional labor, the effects to organizational effectiveness and the significant factors influencing organizational effectiveness in radiation therapy professional. The subjects of this study were the radiation therapists working at the hospital in Seoul and Gyungi. The self-reported questionnaires were administered to 205 radiation therapists and the data were analyzed with SPSS 19.0 package. The level of emotional labor of single or female subjects were revealed higher than married or male. The professionalism of job has significant correlation with emotional labor. Significant explanatory variables of the degrees of emotional labor included organization culture, distress and self-leadership. These three variables demonstrated the explanatory power of 13.9% of the emotional labor. Based on the findings, emotional labor of radiation therapist was correlated with occupational professionalism. These results suggest that the intervention program intervening emotional labor should be continued to develop in order to improve the effective self-leadership, organization culture and distress factor.

본 연구는 우리나라의 대표적인 노지작물인 고추에서 이상고온에 따른 생육 및 생리장해 등 피해정도를 파악하기 위해 수행되었다. 아울러 고온피해를 최소화하기 위한 화학적 대응 기술을 확립하기 위해 빈나리(diniconazole)를 사용하여 그 효과를 검정하고자 하였다. 고추의 신장생장은 생육적온인 25℃보다 온도가 높아질수록 향상되었으나 경직경은 낮았으며, 특히, 30℃에서 재배한 고추 식물체는 연약한 생장을 보였다. 반면 뿌리생육은 생육온도에 따라 큰 차이는 없었다. 고추의 생육적온인 25℃보다 고온에서 재배하면 엽수는 증가하였고, 엽면적도 높았다. 또한 생체중 및 건물중도 높았다. 반면 수확량은 생육적온인 25℃에 비해 고온인 30℃에서는 생산량이 17% 감소하였다. 고추의 생육온도에 따라 낙화율에 차이가 있었으며, 생육적온인 25℃에서는 낙화율이 28.0%였으나, 27.5℃에서는 33.5%, 30℃에서는 52.3%로 온도가 높아질수록 낙화율이 높았다. 칼슘 결핍증은 고추의 생육적온에서는 나타나지 않았으나 온도가 높아질수록 경미하게 증가하는 경향이었다. 반면 역병발병율은 생육온도에 따른 차이는 없었다. 30℃의 이상고온은 낙화율이 문제되었으나, 빈나리를 처리하면 낙화율이 감소하여 10 mg/L처리에서는 대조구에 비해 수량이 10% 향상되었다.

본 연구는 노지채소 작물인 고추를 대상으로 이상 고온조건을 인위적으로 부여하여 화분발아력을 검정 하며, 이상 고온에서의 화분발아력을 향상시킬 수 있는 방법을 강구하기 위해 수행되었다. 고추에서 화 분 발아에 최적온도는 25℃였고, 27.5℃와 30℃에서는 화분발아율이 낮았다. 화분발아에 적합한 sucrose 농도는 10~15%였고, 30% 이상의 농도에서는 화분 발아율이 감소하였다. 화분발아 배지의 적정 pH 5.5 ~6.5였고 이들 조건에서 화분발아율이 높았고, 화분관 신장도 좋았다. 화분 채취시간에 따른 화 분 발아율은 채취 시간에 따라 차이가 있었다. 전반적으로 오전 10시에 채취한 화분에서 발아율이 가장 높았고, 반면 오후에 채취한 화분일수록 화분활력이 저하되었다. 화분발아 배지에 아미노산인 asparagine과 glutamine를 첨가하면 고온에서 화분발아율이 향상되었다. 또한 폴리아민류인 putrescine 과 spermine도 화분 발아율을 향상시켰다. 전반적으로 고온에서 고추 화분발아성을 증진시킬 수 있는 첨가물질 및 처리농도는 supermine 1 mM 처리였고, 대조구에 비해 화분발아율이 15.0% 향상되었다.

In this study, college students, the nature of the locus of control type determines that they affect about career decision making. For this purpose I a systematic and comprehensive study to literature research and empirical research. This research topics and research model based on the hypothesis set and set the hypothesis verified results to the following conclusions were able to elicit. Internals types influence that they showed a positive impact in reasonable career decision making type. Externals types influence that they showed a positive impact in intuitive, dependent career decision making type. The summarized facts, as above, may be empirical analysis results that may be advised during the career decision making of college students, and will be data which will propose a new direction in the career decision making of college students also.

This paper presented experimental results for photocatalytic air cleaner removal performance for malodorous compounds generated from rest room. Photocatalytic oxidation (PCO) efficiency was up to 80∼ 90% for NH₃ in chamber, 29.3% for H2S, 79.6% for CH3SH, 58.8% for DMDS individually. PCO efficiency for DMS(Dimethy Sulfide) and DMDS(Dimethyl Disulfide) were relatively lower than that of NH₃ and CH3SH, this results indicate that DMS and DMDS removal process were effected by by-products of photocatalytic oxidation and humidity. Ozone was relatively low (below 5ppb) under the test conditions through photocatalytic oxidation. It is necessary to test a reliability of the air cleaner for a longtime under the various indoor conditions. But, prototype photocatalytic air cleaner will promise useful air cleaner for indoor air quality applications.

With continuous industrial development, the types, and amount of particulate matter (PM) have been increasing. Since 2018, environmental standards regarding PM have become more stringent. Pulse air jet bag filters are suitable for PM under the 20㎛ and, can function regardless of size, concentration and type. Filtration velocity and shape are important factors in the operation and design of the pulse air jet bag filters however, few established studies support this theory. In this research, numerical simulations were conducted based on experimental values and, several methods were employed for minimizing the pressure drop. In the pilot system, as the inlet duct velocity was faster than 19 m/sec, flow was not distributed equally and, re-entrainment occurred due to the hopper directional vortex. The multi-inlet system decelerated the hopper directional vortex by 25 ~ 30% , thereby decreasing total pressure drop by 6.6 ~ 14.7%. The guide vane system blocked the hopper directional vortex, which resulted optimal vane angle of 53°. The total pressure of the guide vane system increased by 0.5 ~ 3% at 1.5 m/min conditions. However, the filtration pressure drop decreased by 4.8 ~ 12.3% in all conditions, thereby reducing the operating cost of filter bags.

본 연구에서는 안동댐 퇴적물의 중금속 및 용출 특성을 분석하기 위하여 X-선 회절 분석, ICP 분석, 용출 실험을 수행하였다. X-선 회절 분석 결과 안동댐 퇴적물의 주구성 광물은 석영, 사장석, 녹니석, 일라이트이다. 퇴적물에 대한 ICP 분석 결과 비소와 카드뮴의 농도가 매우 높게 나타났다. 용출 실험은 교란 상태에서 호기성 및 혐기성 환경에서 수행하였다. 용출 실험 결과 혐기성보다 호기성 상태에서 더 많은 중금속이 용출되는 경향을 나타내었다. 호기성 상태에서 시간이 지남에 따라 농도가 증가하는 항목은 망간, 아연, 카드뮴이며 혐기성 상태에서는 망간, 철, 비소이다. 퇴적물 중금속 농도 대비 용출비는 호기성 및 혐기성 환경에서 각각 Mn > Cd > Zn > Ni > Cu > As > Pb ≒ Fe ≒ Cr이 며 Mn > As > Cu > Ni > Zn > Pb ≒ Cd ≒ Fe ≒ Cr이다.

본 연구에서는 안동댐과 임하댐의 퇴적물과 유입되는 부유물의 특성을 색도분석, X-선회절분석 및 유도플라즈마/질량분석법을 이용하여 분석하였다. 안동댐과 임하댐으로 유입되는 부유물 및 댐 퇴적물의 광물조성은 석영, 사장석, 녹니석, 일라이트이며 소량의 몬모릴로나이트와 캐올리나이트를 포함하고 있다. 안동댐 퇴적물과 다르게 임하댐 퇴적물에는 다량의 방해석을 포함하고 있다. 색도는 시료에 따라 약간의 차이가 있지만 회갈색에서 어두운 주황색 정도이다. 퇴적물의 중금속 농도는 안동댐이 임하댐보다 더 높다. 안동댐과 임하댐 퇴적물과 유입 부유물질의 주요 중금속 농도는 미국의 국립해양대기관리청의 기준을 적용할 경우 높은 오염도를 나타낸다. 안동댐 퇴적물의 중금속 농도가 임하댐보다 높은 것은 안동댐으로 유입되는 부유물질의 중금속 농도가 임하댐으로 유입되는 부유물질의 중금속 농도보다 높기 때문이다.

This paper proposes a deep learning-based underground object classification technique incorporated with phase analysis of ground penetrating radar (GPR) for enhancing the underground object classification capability. Deep convolutional neural network (CNN) using the combination of the B- and C-scan images has recently emerged for automated underground object classification. However, it often leads to misclassification because arbitrary underground objects may have similar signal features. To overcome the drawback, the combination of B- and C-scan images as well as phase information of GPR are simultaneously used for CNN in this study, enabling to have more distinguishable signal features among various underground objects. The proposed technique is validated using in-situ GPR data obtained from urban roads in Seoul, South Korea. The validation results show that the false alarm is significantly reduced compared to the CNN results using only B- and C-scan images.

The volatile odor compounds emitted form a stuffing agent production process were quantified by ATD and GC-MS, and then odor causing compounds were identified by the method of EOI using each TLV. As the results, 72 odor compounds were detected and total concentration was turned up 87.6 ppmv level. In these compounds, aldehyde group is higher 45.49 ppmv than others group, the next is turn up the order of aliphatics, alcohols, esters, ketones. The EOA of aldehyde group show up 101,720 and 97.2%, respectively, the odor causing compounds were identified each of odor 2-Octenal 28.31%, Hexanal 24.06%, Valeraldehyde 16.07%, Butyraldehyde 9.69%, Heptanal 4.97%, Propionaldehyde 4.64%, Acetaldehyde 3.31%. The TLVs of 7 major odor compounds are lower value level of 0.001∼0.0001 ppmv, odor causing even in trace level. We need to be concerned with reduction of aldehyde compounds in the odor problem by a stuffing agent production process or ironing process of the textile containing a stuffing agent.

In this study, using coke dust from ironwork, the pulse pressure on a pulse air jet bag filter was investigated considering the influence of the pressure loss due to filtration velocity and pressure intervals. The research on the optimal pulse pressure prediction of a pulse air jet type bag filter using coke dust showed the following results. Pressure loss volatility produced by the pulse pressure under low dust concentration(0.5, 1 g/m3) and low face velocity(1.25 m/min) was less than 10 mmH2O. This suggests that the pulse pressure has a low impact on the pressure loss. In contrast, pressure loss volatility under high dust concentration(3 g/m3) and high face velocity(1.75 m/min) was 25 mmH2O. Therefore, pulse pressure with high dust concentration and high face velocity has a strong influence on the pressure loss volatility, compared to the condition of low dust concentration and low face velocity. The optimal pulse pressure of inlet dust concentration(0.5 g/m3) was 6 kg/cm2 under the same face velocity(1.75 m/min). As concentration increased from 1 to 2 g/m3, the pulse pressure gradually reached 5 kg/cm2 thus indicating that the pulse pressure(5 kg/cm2) is pertinent at a high concentration(3 g/m3). The pulse intervals: 20, 25 and 30 sec, which are relatively longer than 10 and 15 sec, corresponded to high pressure loss volatility produced by the pulse pressure. Furthermore, low pressure loss volatility was noted at 5 kg/cm2 of the overall pulse pressure.

The purpose of this article is analyzing the impacts of seawater surface temperature rise on sea mustard yields of Goheung and Wando coast in Korea, with employing a panel data regression model. Our results show that there has been a negative impacts on sea mustard yields as seawater surface temperature continuously has been rising. Especially if the upward trend in seawater surface temperature since 2005 will be maintained in future, sea mustard yield is expected to decrease by 2.6% per year.

The mother machine makes the necessary shape by processing materials such as metal. The SCFs are applied to the processing surface when the mother machine processes the material, thereby improving the cutting conditions. SCFs contain high concentrations of organic components and nitrogen compounds, which can cause problems such as eutrophication and algae bloom. Therefore, proper treatment is required. Electrochemical treatment is expected to be an alternative to conventional processes, and to be useful in various wastewater treatments. Moreover, it is an efficient elimination technique for contaminants and has a simple equipment composition. In this study, the removal efficiency of the T-N contained in the waste SCF using electrochemical treatment is analyzed. The electrode was made of titanium and iridium, made into a perforated metal sheet to prevent an imbalance of the sample concentration in the reactor. Experiments were conducted to examine the effects of current density and the concentration of the supporting electrolyte (NaCl, Na2SO4) on removal efficiency. In the cases with 60 A/m2, 80 A/m2, and 100 A/m2 current densities, the removal efficiencies of the T-N contained in the waste SCF were 51.03%, 68.83%, and 79.58%. Comparing between the addition and non-addition of NaCl, the removal efficiency with the addition of NaCl (5 ~ 10 mM) was higher than for no addition at 60 min for all current densities. The addition of Na2SO4 increased the removal rate of the T-N, but it was less effective than NaCl addition.