The purpose of this experimental research is to evaluate the workability and strength properties of hybrid fiber reinforced concrete containing amorphous steel fiber and organic fiber. For this purpose, the hybrid fiber reinforced concrete containing amorphous steel fiber(ASF) with polyamide(PA) and polyvinyl alcohol(PVA) fiber, respectively were made according to their total volume fraction of 0.5% for water-binder ratio of 33%, and then the characteristics such as the workability, compressive strength, and flexural strength of those were investigated. It was observed from the test results that the workability and compressive strength at 7 and 28 days were decreased and the flexural strength at 7 and 28 days was increased with increasing ASF and decreasing organic fiber.

본 연구에서는 비정질강섬유의 혼입이 초고강도콘크리트의 폭렬특성에 미치는 영향이 실험적으로 검토되었다. 콘크리트는 압축강도 100과 150 MPa의 초고강도콘크리트가 사용되었다. 폴리프로필렌섬유는 0.15 vol%, 비정질강섬유는 0.3 및 0.5 vol%가 혼입되었다. 시험체는 콘크리트의 압축강도와 섬유혼입 조건에 따라 6수준이 제작되었고, ISO-834 가열곡선에 의해 가열되었다. 결과로써 폴리프로필렌섬유와 비정질강섬유가 혼입된 초고강도콘크리트의 폭렬제어에 있어서는 용융된 폴리프로필렌섬유가 형성하는 공극네트워크를 통해 수증기가 이동하는 효과가 지배적인 것으로 나타났다. 또한, 비정질강섬유 0.3v ol% 혼입률에서는 폭렬제어에 큰 영향을 미치지 않지만, 0.5 vol%의 비정질강섬유가 혼입될 경우에는 수증기가 이동할 수 있는 균열의 발생이 억제됨으로써 콘크리트 폭렬의 원인으로 지적되고 있는 수분막힘층(moisture clog)가 형성될 가능성이 높은 것을 확인할 수 있었다.

In this study, it evaluate the Local damage properties of amorphous metallic fiber reinforced cement composite by different fiber length. 30mm and 15mm length of amorphous metallic fiber was reinforced and fiber volume fraction was set to 1.0, 1.5 vol.%. Flexural test and high speed projectile impact test was performed. As as result, 30mm length of specimen showed more good flexural and impact resistance performance compared to 15mm length of specimen.

The purpose of this experimental research is to evaluate the mechanical properties of high performance concrete using amorphous steel fiber and organic fiber. For this purpose, the hybrid fiber reinforced concrete containing amorphous steel fiber(ASF) and polyamide(PA) fiber were made according to their total volume fraction of 0.5% for water-binder ratio of 33%, and then the characteristics such as the workability, compressive strength, and direct tension strength of those were evaluated. It was observed from the test results that the workability and compressive strength was decreased with increasing ASF and decreasing PA fiber. but the direct tension strength was on the whole increased with increasing ASF and decreasing PA fiber.

Thin plate amorphous steel fiber has more tensile strength and corrosion resistance than general steel fiber, and it has different fiber direction by casting direction. In this study, evaluating impact resistance and sectional crack characteristic of amorphous steel fiber-reinforced cement composites by casting direction.

Considering the probabilistic distribution of fibers in amorphous steel fiber reinforced concrete(ASFRC), the number of amorphous steel fibers crossing the critical section were theoretically derived as a function of fiber geometry, specimen dimensions and fiber volume fraction. The developed theoretical expressions reasonably predicted the number of amorphous steel fibers at different sections.