This paper reports an uncertainty analysis of quantitative visualization methodology for slug bubble dynamics in downward-facing nucleate boiling condition. Measurement of dynamics of slug bubble, i.e. departing speed, frequency, and diameter, is very important to predict safety margin of thermal systems in moving vehicle. By employing high speed visualization and post-processing, we quantitatively measured the volume and location of slug bubble, so that vapor generation rate and departing speed data were derived from their time differentiation. As a visualization methodology, its reliability was evaluated via uncertainty analysis. For 95% confidence interval, uncertainty of vapor generation rate and departing speed were 3% and 2%, respectively, and which were one order lower than standard deviation of those data.

The likelihood of failure for the stress corrosion cracking (SCC) of caustic cracking, which affect to a risk of facilities, was analyzed through the risk based-inspection using API-581 BRD. We found that SCC of the caustic cracking was occurred above 5 % NaOH concentration, and the technical module subfactor (TMSF) was maximized for above 50 % concentration. The heat traced and monitoring were not sensitive to the TMSF with NaOH concentration and temperature. But the steam out was more of less affect minimum value of the TMSF. Also, the inspection number, the inspection effectiveness, and the year since inspection were very sensitive to the TMSF with NaOH concentration and temperature. Therefore, the plan of next inspection will be established with compositively considering those at once.

본 연구에서는 지진하중을 받는 고층 RC 골조구조물의 횡변위를 정량적으로 제어할 수 있는 방안을 제시한다. 이를 위해 수학적인 일반성을 가지면서 큰 규모의 문제도 효율적으로 다룰 수 있는 근사화 개념을 도입하여 횡변위 구속조건식을 설정한다. 아울러 구조부재의 단면특성 관계식을 설정함으로써 설계변수의 수를 줄여주고, 초기에 주어진 단면형상이 최적설계 과정동안 계속 유지된다는 가정을 이용하여 최적설계결과에서 구해진 단면특성에 따라 부재단면크기를 산출하는 방안을 강구한다. 특히 근사화된 횡변위구속조건식을 정식화 하기 위해 동적 변위민감도해석 방안이 고려된다. 이와 같이 제시된 동적 강성최적설계 기법의 효용성을 검토하기 위해 10층과 50층 규모의 삼차원 RC 골조구조물 모델이 고려된다.

Likelihood of failure for the external corrosion of carbon and low alloy steels, which affect to a risk of facilities, was analyzed quantitatively through the risk based inspection using API-581 BRD. We found that the technical module subfactor (TMSF) decreased as the inspection number increased and it increased as the Inspection effectiveness and the used year increased. In this condition, the TMSF showed high value for the case of the marine/cooling tower drift area as a corrosion driver, poor quality of coating, no insulation, and low insulation condition.

Likelihood of failure (LOF) for the external corrosion of stainless steel, which affect to a risk of facilities, was analyzed quantitatively through the risk based inspection using API-581 BRD. We found that the technical module subfactor (TMSF) decreased as the inspection number increased and it increased as the inspection effectiveness and the used year increased, and that the TMSF showed high value for the case of the marine/cooling tower drift area as a corrosion driver, In this condition, the LOF for the external corrosion of stainless steel had lower than that for the carbon and low alloy steels