본 연구에서는 뒤틀림을 받고 있는 정사각형 단면의 중공단면 보를 최소자승법과 경계요소법을 이용하여 수치 해석하고 구조물을 해석하였다. 임계하중은 하중을 점차적으로 증가하여 구조물이 파괴가 발생하여 안정성을 상실하는 상태에서 가 장 작은 하중을 의미한다. 뒤틀림을 받고 있는 beam은 일반 구조물에서 많이 발생하는 현상이며, 구조물의 안정성에 크게 영향을 미치고 있다. 최소자승법과 경계요소법은 복잡한 구조물에서도 물론, 다양한 경계조건을 포함하는 문제에 이르기까 지 구조물의 안정성을 검사하는데 효과적인 수치해석 방법이다. 특히 뒤틀림의 문제에서는 단순성 및 일반성에 기인하여 매우 적합한 해석방법이다. 본 연구에서는 뒤틀림을 받고 있는 중공단면 보의 해석해를 유도하여 최소자승법으로 수치 해 석하고 또한 경계요소법을 적용하여 빔의 안정성을 비교 검토하였다. 개발한 컴퓨터 프로그램의 타당성을 증명하기 위하여 삼각형, 사각형 그리고 타원형 단면에 대하여 각각 해석하여 해석해와 비교․검토하였다.

Location-Based Services(LBS) is a service that provide location information by using communication network or satellite signal. In order to provide LBS precisely and efficiently, we studied how we can reduce the error on location determination of objects such people and things. We focus on using the least square method and triangulation positioning method to improves the accuracy of the existing location determination method. Above two methods is useful if the distance between the AP and the tags can be find. Though there are a variety of ways to find the distance between the AP and tags, least squares and triangulation positioning method are wildely used. In this thesis, positioning method is composed of preprocessing and calculation of location coordinate and detail of methodology in each stage is explained. The distance between tag and AP is adjusted in the preprocessing stage then we utilize least square method and triangulation positioning method to calculate tag coordinate. In order to confirm the performance of suggested method, we developed the test program for location determination with Labview2010. According to test result, triangulation positioning method showed up loss error than least square method by 38% and also error reduction was obtained through adjustment process and filtering process. It is necessary to study how to reduce error by using additional filtering method and sensor addition in the future and also how to improve the accuracy of location determination at the boundary location between indoor and outdoor and mobile tag.

본 논문에서는 위치기반서비스의 핵심기능을 담당하는 측위기술 중 흔히 사용되고 있는 삼각측량법과 최소자승법을 보정한 방법을 이용하여 객체의 위치를 결정하는 알고리즘의 산포를 감소시키는 방안을 연구하였다. 두 측위 방법에서 사용되는 거리값은 모두 동일한 보정과 필터링 과정을 적용하였으며, 프로그램 구현 후 실내에서 테스트를 실시하였다. 프로그램은 LabView 2010으로 구현하였고, 각각의 알고리즘을 모듈화하여 필터링 적용 전후 및 개선효과를 비교하기 쉽도록 구성하였다. 일반적인 환경에서 실험한 결과 삼각측량이 최소자승법보다 더 좋은 정확도를 보여주었고, 필터링 과정을 거칠수록 정확도가 향상되는 것을 확인하였다.

We propose a navigation algorithm using image-based visual servoing utilizing a fixed camera. We define the mobile robot navigation problem as an unconstrained optimization problem to minimize the image error between the goal position and the position of a mobile robot. The residual function which is the image error between the position of a mobile robot and the goal position is generally large for this navigation problem. So, this navigation problem can be considered as the nonlinear least squares problem for the large residual case. For large residual, we propose a method to find the second-order term using the secant approximation method. The performance was evaluated using the simulation.

This paper presents a PID automatic gain-tuning algorithm for the electronic throttle valve which is driven by wire. Since the system characteristics of position control for electronic throttle valve are so complicated that both the real time robustness and the manufacturing cost must be considered for mass production. To resolve this paradox, a kind of algorithm called RLS (Recursive Least Square) is adopted for the control of the ETB (Electronic Throttle Body). Using this algorithm, the PID gains can be adjusted automatically with the estimated system parameters. Furthermore, a pre-filter is supplemented for the sake of the robustness against the friction and loads. From the industrial requests for the system, the design specifications are decided as follows: the settling time should be less than 1 sec and the overshoot should be kept below 3%. The results of the experiments based on this approach show that the high robustness can be achieved while the system stability is satisfied steadily. A parameter estimation scheme and a gain-tuning algorithm have been properly combined and utilized in this research and the effectiveness is verified through the real experiments.