Fen(分°) is the proportional dimension unit of the standard timber section on Yingzaofashi(營造法式), and there is a phrase that not only structural members but the whole structural design of a building also use Fen as the dimension unit on the book. But in fact only the section dimensions of structural members are recorded by Fen, but the design dimensions are recorded by Chi(尺) on the book. Other historical records also described the building size by Chi. So there has been long-standing debate on the phase in Chinese architectural history society, including the recent confrontation on the analysis of survey figures of the east great hall of Foguangsi temple(佛光寺東大殿). This paper analyzes all the records about the size of structural members and section planning on the book to make various calculation and evaluation. And it makes a survey of Cai(材) as the dimension and design unit between Chi and Fen through geometric analysis. Cai might be a rough unit of measurement in terms of structural and proportional scheming on Yingzaofashi, and the full size Cai(足材) had been a building scheming module before the Song dynasty.

This study investigated the dimensional plan of Kor Sork temple in Preah Pithu complex, Angkor by civil surveying, 3D scan, measured integer ratio and regularity. According to epitaph and preceding researches, Khmer temples were built based on structural planing with the constant ratio and regularity by using special construct measure scales "Hasta" and “Byama”. The study assumed the same unit method was applied in Kor Sork temple and identified the regularity of actual measurement value about the temple. The assumed construct measure scale (Hasta) used for the design of this temple is 413mm. The overall apart arrangement of the temple is different in the East-West direction and the North-South direction. In the East-West direction, the whole scale is 180 hasta, and it is divided into 20 hastas. On the other hands, it was confirmed that the North-South direction is 96 hasta and it was divided four quadrants in 24 hastas. Regarding the detailed design, the regularity according to the constant ratio was confirmed. 7 hasta was used as the basic unit on the first floor and 6 hasta were used as the basic unit on the second floor of the terrace. the basement and the central sanctuary is of 6 hasta and 8 hasta were used as the basic standard.

The purpose of the study, approaching from the aspect of the construction technologies, is to determine the architectural techniques of traditional wood architects in existence, through which the systems and techniques that create the inherent characteristics of Korean architecture are clarified. With understanding traditional construction system and focusing on the fact that built environment results from the consistent standards and technologies of architects, this study inquires into the systematic standard and its formation that present in the process of planning for the overall scale and shape of a building from the study determines dimension of structural members. All the members that constitute the structure are trimmed in advance and assembled in a short period of time on the site. Because of that, the dimensions for trimming and assembling are predetermined according to designated standards in the planning process, therefore consistent standard of computation are in necessity to design shapes and sizes of enormous amount of structural members. This study also shows the standards of measurement employed by architects while planning for structural members of a building, and how the size and range of its composition are developed.

본 연구는 유역의 침수특성치를 기준으로 하여 치수계획규모를 설정하는 방법을 연구한 것이다. 본 연구에서는 2010년 9월 21일 광화문일대에 발생한 침수피해를 이용하여 XP-SWMM 2010 모형을 검증한 후 침수예상도를 산정하였다. 확률강우량은 Huff의 4분위법으로 분포시켰으며, 기존의 유역출구점을 기준으로 한 임계지속시간의 문제점을 제시하였으며 침수특성치(관로첨두유출량, 평균침수심, 특정지점의 최대침수심, 침수면적, 침수총량, 침수지속시간)를 기준으로 유역치수계획규모를 설정하는 방법을 제시하였다. 현재 유역의 치수계획규모 설정시 사용되고 있는 관로첨두유출량은 도시유역의 침수특성을 합리적으로 반영하지 못하는 것으로 판단되었으며 도시유역에서 발생하는 침수의 결과치인 침수특성이 치수계획규모 설정에 합리적인 것으로 나타났다. 유역의 치수계획규모는 각 유역의 지리·물리·사회·경제적 특성에 기반한 침수특성치를 선택하여 그 유역이 감당할 수 있는 침수특성치를 제외한 나머지의 침수특성치를 극복할 수 있도록 설정해야할 것이다.

본 연구는 기존에 공학적 분석에 주로 치중하였던 대안수립 방법을 개선하여 경제적 측면에서 최적사업규모를 고려하는 방법을 제시하기 위한 것이다. 이를 위해서 치수사업을 투입과 산출에 의한 생산활동으로 정의하고 투입과 산출조합들을 최적화하는 방식의 대안수립 방안을 제시하였다. 본 논문은 제시된 방법론에 대한 사례연구로서 영산강유역 치수계획을 위한 대안들을 최적사업규모 결정을 통해 수립하였다. 최적사업규모 결정 결과, 최적대안의 순편익이 대안 내의 대규모 단

유역단위의 통합적 치수계획은 고려되는 단위사업의 수가 많고 그 특성도 다양하므로 이들을 조합한 최적의 대안을 수립하기가 쉽지 않다. 최적의 대안수립을 위해서는 홍수피해를 산정하는 것뿐만 아니라 감내할 수 있는 피해의 수준을 결정해야만 한다. 이에 대한 결정은 큰 틀에서 '사회적 합의'라는 방식으로 도출되지만 일차적으로는 기술적으로 가능한 범주에서 경제적 효율성 측면의 분석을 필요로 한다. 본 연구의 목적은 각 단위사업들의 조합이 경제적 효율성을 갖도록