본 연구의 목적은 강성 개폐식 대공간 건축물의 비정형 입체트러스를 파라메트릭 기법을 적용하여 모델링을 구현하는데 있다. 개폐식 대공간 건축물은 비선형성 형상을 모델링하거나 다수의 모델을 대안별로 생성, 해석, 검토하는 과정에 많은 시 간과 기술이 소요되는 것이 현 실정이다. 이러한 문제점을 해결하기 위해서 첫째로, 개발에 사용된 파라메트릭 모델링 전산 도구를 소개하고, 강성 개폐식 대공간 건축물의 비정형 입체트러스를 분석하며, 개발한 입체트러스의 파라메트릭 컴포넌트 로 모델링을 구현하게 된다. 따라서 지붕이 개폐되는 방식으로 구분한 입체 트러스 종류의 모델링을 구현해 낼 수 있는 컴포 넌트를 형상이나 기능에 따른 각각 대안별로 개발하여 효율적인 개폐식 지붕의 모델링을 가능하게 하는 것이 추후 연구사항 이다.

Cable structures are lightweight structures of flexible type, cable members have only axial stiffness related to tension, they can carry neither bending nor compression. This study is the analysis of cable truss systems are composed of upper and low cables by connecting bracing cables, the structural principle is based on a tensegrity system by using bracing tension members, discontinuous compression members and continuous tension members. A hanging roof of cable truss system is too flexible against vertical loads, most cable members are stabilized by connecting the prestressed upper and lower cable by bracing cables. A cable truss roof system is formed by adding a set of cables with reverse curvature to the suspension cables. With the sets of cables having opposite curvature to each other, cable truss is able to carry vertical load in both upward and downward direction with equal effectiveness, and then a cable truss acts as load bearing elements by the assemble of ridge cables, valley cables and bracing cables. This paper will be shown the geometric non-linear analysis result of cable truss systems with various sag ratio for deflections and tensile forces, the analytical results are compared with the results of other researchers.

Western style timber roof trusses used as typical roof structures of buildings during a modern period have been developed with the interactions with their facade and functionality. The shapes of trusses and member sizes have been diversely changed by the purposes of architects, historical circumstances, and structural characteristics. For this reason, the change in the shapes of western style timber trusses along the times is one of important technology assets demonstrating the development of their structures during the modern period. Therefore, the purpose of this paper is to find out their structural characteristics throughout parametric analysis of which parameters were determined from the collected and classified documents on western style timber roof structure built in the modern period carefully obtained from public institutions. Results of the parametric analysis are as follows. The number of king-post trusses and modified king-post trusses built between 1920 and 1937 reaches almost half of the total number of truss types investigated. The mean values of their spans, distances, tributary areas, and height are respectively, 10.5m, 2.4m, 24.37㎡ and 3.24m. The cross-section areas of trusses tend to reduce since the city construction law was enacted in 1920. Also, this study found that western architects usually used larger structural members than eastern architects and usages and finishing materials of roof trusses are not always considered as one of the important design parameters.