본 논문에서는 폭발하중을 받는 부재의 저항성능 평가를 위한 모멘트-곡률 관계 기반 수치해석 기법을 소개한다. 직접전단 파괴 모 드를 고려하기 위하여 경험적인 직접전단응력-슬립양 관계를 기반으로 하는 무차원 스프링 요소를 도입하였다. 재료에 대해 정의된 동적증가계수 식을 바탕으로 단면의 모멘트-곡률 관계에 직접적으로 적용가능한 단면의 곡률 변화율에 따른 동적증가계수 식을 제작 하였다. 또한 부착슬립의 영향을 고려하기 위하여 소성힌지영역 내에 등가 휨강성을 도입하였다. 제안된 수치해석 모델의 타당성 검 증을 위하여 실험결과와의 비교연구를 수행하였으며, 단자유도계 모델의 해석결과와의 비교를 통해 본 수치해석 모델의 우수성을 확 인하였다. P-I 선도를 제작하여 부재의 휨 파괴 및 직접전단 파괴에 대한 저항성능을 평가하였으며, 매개변수 연구를 수행하여 P-I 선 도 및 저항성능의 변화를 확인하였다.

This paper aims to develop numerical models for seismically-deficient reinforced concrete columns retrofitted using a fiber-reinforced polymer jacketing system under blast loading scenarios. To accomplish the research goal, a coupling model reproducing blast loads was developed and implemented to the column model. The column model was validated with a past experimental study, and the blast responses were compared to the numerical responses produced by past researchers. The validated modeling method was implemented to the non-retrofitted and retrofitted column models to estimate the effectiveness of the retrofit system. Based on the numerical responses, the retrofit system can significantly reduce the peak dynamic responses under a given blast loading scenario.

A tensile failure criterion that can minimize the mesh-dependency of simulation results on the basis of the fracture energy concept is introduced, and conventional plasticity based damage models for concrete such as CSC model and HJC model, which are generally used for the blast analyses of concrete structures, are compared with orthotropic model in blast test to verify the proposed criterion. The numerical prediction of the time-displacement relations in mid span of the beam during blast loading are compared with experimental results. Analytical results show that the numerical error is substantially reduced and the accuracy of numerical results is improved by applying a unique failure strain value determined according to the proposed criterion.

The purpose of this study is to establish and examine the analytical methods based on FEA to predict the behavior of the precast prestressed concrete panels under blast loading. The precast prestressed concrete structures are on the rise, but there is little research in this regard explosion. In this paper, we set the variable to the three models. TNT 500 kg was an explosion in the standoff-distance 3m. In conclusion, the precast models damage was concentrated in the bonded portion. The concrete panels after an explosion occurred continuously deformed. But the including prestressed panels deformation occurs only at the beginning of the explosion were able to see the results.

In this study, through the static and dynamic finite element analyses, we want to present the basic data to confirm the effect of blast loading on the force-displacement curve and mid-span displacement history of SC walls installed in the nuclear power plant(NPP).

This paper presents the mechanical response of concrete composites subject to extreme loadings including blast. In general, the dynamic strength of the concrete was greater than the static strength of the concerete so the dynamic increase factor (DIF) was defined as a ratio of the dynamic strength to the static strength and greater than one. Since the DIF was a function of strain rate, it was hard to apply the DIF to the analysis and/or design of concrete. Therefore, the new

The effect of loading on chloride penetration into concrete is evaluated in this study. It is found that the chloride pene- tration rates for OPC concrete and blast furnace slag BFS concrete under the tensile stress were increased by 29% and 77%, respectively. The diffusion coefficient of FA and BFS concrete was lower than that of conventional concrete without BFS, no loads and stress states. Under tensile stress, the diffusion coefficient for FA and BFS, plain concrete showed higher values with increasing stress. The influence of specific surface area on the diffusion coefficient was investigated. As a result, the larger the specific surface areas of BFS are the lower diffusion coefficients. This tendency was more pronounced under the high stress conditions. The chloride penetration depth was distributed uni- formly when no stress was applied. However, in the case of tensile loading, the diffusion depth was not distributed uni- formly, and showed prominent characteristics. This result indicates that analysis using average values of chloride pene- tration depth is not proper under load conditions.

This paper presents the results of an experimental test conducted subjected to blast loading of steel plates. An experimental results were compared with the simulation result derived in AUTODYN to validate the simulation method used in this study.

This study aims to verify the method of calculating blast load making similar damage from impact loading. In this process, LS-DYNA is used for modeling beam blast test. From the analysis, the max deflection of impact test and blast analysis is similar, so this method is verified.