N-nitrosodimethylamine (NDMA) is a potent carcinogen that is frequently detected nitrosamine from water chloramination. This study investigated the occurrence of NDMA and its potential precursor, ranitidine (RNT), in four wastewater treatment plants (WWTPs). Additionally, the effects of chloramination methods and oxidative pretreatment on the NDMA formation potential (FP) were assessed. Concentration levels of NDMA in the WWTPs waters ranged from 2.5 (detection limit) to 72.6 ng/L, while RNT values ranged from 1.32 to 186.9 ng/L. Further study indicated that the NDMA-FPs from chloraminated wastewaters varied between 36.2 and 227.8 ng/L. Nonetheless, chloramination methods and oxidative pretreatment significantly impacted the NDMA-FP levels. For example, breakpoint chlorination and stepwise chloramination promoted NDMA-FP when compared to preformed chloramination, which could be attributed to the formation of dichloramine and chlorine species. In contrast, prechlorination was found to effectively mitigate NDMA-FP, based on integrated ultraviolet (UV) irradiation. Notably, UV irradiation with free chlorine (UV/Cl2) or permanganate (UV/MnO4 -) reduced NDMA-FP by up to 70%. This study suggests that UV/MnO4 - and UV/Cl2 may be used as alternative mitigation strategies for reducing nitrosamine-FP in the water treatment process.

In this research, heavy metals and T-P removal characteristics of plated wastewater are derived using BPC(Break Point Chlorination) process. AA sedimentation pond outflow(Influence) was evaluated for the removal efficiency of heavy metal(Ni) and T-P at a reaction time of 25 minutes by NaOCl input volume(9, 11, 13 and 15 mL). In the case, the higher the NaOCl input volumes, the higher the ORP values were maintained and the higher the removal efficiency tended to be. On the other hand, T-P was judged to have a low relationship between the ORP value and the removal efficiency. In addition, the efficiency of removal heavy metals and T-P in the plated wastewater by injecting 10 mL, 15 mL, 20 mL and 25 mL NaOCl, increased as the amount of NaOCl injected increased, the amount of NaOH input for pH increased. It was found that suspended solid in effluence also increased. It was also observed that the color of the plating wastewater changed from yellowish green to green to charcoal gray to black as the amount of NaOCl injected increased. Treatment characteristics of the reaction time, the longer the reaction time with the substance to be treated after the input of NaOCl, the more the heavy metal removal efficiency tended to increase. Through XRF analysis of the sludge, the constituents in the sludge such as NaCNO, CNCl, Na3PO4, CrO4, 2Na2CrO4 and 2NaNO3 will be analyzed in detail, and the mechanisms of the reaction between the plated wastewater and the complex compound will be elucidated.